Thanks for checking gkkpch, I will try the beta version if it works. Appreciate your help.
Understanding the issue now, I’m sure the beta won’t work either.
(Edited)
The nvme driver module is in the initramfs, so there must be another module missing causing the drive not being recognized during the init phase and cannot be booted from successfully.
You are the first person to encounter this issue, sorry.
Could you tell me which USB C 256GB nvme drive you have?
Can you boot Volumio from usb, connect the usb-c drive and do
lsusb
ls -l /dev/nvme*
sudo lsmod
from the commandline?
Booting from an SD card is very rare on an x86 device, so I have not done anything to prepare that.
I will have a look at your data.
The Orica device is available here from Amazon and as I intended to buy a usb-c external drive anyway (not for Volumio), I’ll get one with your specs and test with it before giving it its intented destination.
Strange, this is what I use now and want to replace. It tested it with Volumio and it works fine.
Unlike WIndows, Linux and Mac do not need specific drivers for DAC hardware as they have a generic sound driver (with some additional dac-specific quirks. e.g. for DSD compatibility).
Topping D10S is known to be working fine, incl. DSD direct capabilities.
Finally closed this Orico usb to nvme adapter issue, caused by missing UAS (usb attached scsi) support in our initramfs.
There was no relation with nvme at all, just a missing usb storage module in initramfs.
Thanks @JMZ for reporting this issue, would not have found it otherwise.
To be released with the next version of Volumio 3, with current and upcoming 6.1 kernel.
Little present, full blown Volumio beta version:
Volumiobuster-3.542-2023-09-22-x86_amd64
You can’t report on it other then the x86 beta thread.
You can’t update to the final version.
Continue to use the existing image with ausb key or switch to a full-blown beta with Orico, your choise.
Not sure about when the switch takes place, not my call.
Cheers - Gé
Case now closed for me
I installed two new Volumio latest version 3.5xx on two Dell wy3040 boxes. When boot from USB, iOS app and HomeAssistant can find these, but after install to inner EMMC storage and boot from it, I can only access Volumio from Web.
Is it right?
Did you run the complete setup and validate the given ip?
As the Dell’s WY3040 runs pretty stable and flawless.
Yeah, installed to inner storage and complete all setup procedures.
Play music very well, including FLAC and DSD files.
I use http://…/dev to enable SSH, but the log is:
Starting Live Log...
info: CorePlayQueue::getTrack 0
info: CoreCommandRouter::volumioGetQueue
info: CoreStateMachine::getQueue
info: CorePlayQueue::getQueue
info: CoreCommandRouter::executeOnPlugin: system , getHwuuid
info: CoreCommandRouter::volumioGetState
info: CorePlayQueue::getTrack 0
info: CALLMETHOD: system_controller system enableLiveLog true
info: CoreCommandRouter::executeOnPlugin: system , enableLiveLog
info: Launching a new LiveLog session
info: CoreCommandRouter::volumioGetState
info: CorePlayQueue::getTrack 0
info: Listing playlists
info: Listing playlists
info: CALLMETHOD: system_controller system enableSSH true
info: CoreCommandRouter::executeOnPlugin: system , enableSSH
volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/systemctl start ssh.service
pam_unix(sudo:session): session opened for user root by (uid=0)
pam_unix(sudo:session): session closed for user root
volumio : TTY=unknown ; PWD=/ ; USER=root ; COMMAND=/bin/systemctl enable ssh.service
pam_unix(sudo:session): session opened for user root by (uid=0)
Reloading.
/lib/systemd/system/winbind.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/winbindd.pid → /run/samba/winbindd.pid; please update the unit file accordingly.
getty@tty1.service: Current command vanished from the unit file, execution of the command list won't be resumed.
Reloading.
/lib/systemd/system/winbind.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/winbindd.pid → /run/samba/winbindd.pid; please update the unit file accordingly.
Reloading.
/lib/systemd/system/winbind.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/winbindd.pid → /run/samba/winbindd.pid; please update the unit file accordingly.
pam_unix(sudo:session): session closed for user root
info: enable SSH service success
info: CoreCommandRouter::volumioGetState
info: CorePlayQueue::getTrack 0
**error: Could not load host key: /etc/ssh/ssh_host_rsa_key**
error: Could not load host key: /etc/ssh/ssh_host_dsa_key
error: Could not load host key: /etc/ssh/ssh_host_ecdsa_key
fatal: No supported key exchange algorithms [preauth]
info: CoreCommandRouter::volumioGetState
info: CorePlayQueue::getTrack 0
info: Listing playlists
info: Listing playlists
wlan0: WPA: Group rekeying completed with 08:55:31:b1:54:5a [GTK=CCMP]
info: CoreCommandRouter::volumioGetState
info: CorePlayQueue::getTrack 0
info: CoreCommandRouter::volumioGetState
info: CorePlayQueue::getTrack 0
info: Listing playlists
info: CoreCommandRouter::volumioGetState
info: CorePlayQueue::getTrack 0
info: CoreCommandRouter::volumioGetState
info: CorePlayQueue::getTrack 0
info: Listing playlists
info: Listing playlists```
I have the same problem with Volumio x86, rel. 3,546, installed on a Futro S900, with a USB Wifi dongle.
Everything works perfectly both with the cable and with the wifi and the internal sound card, but if I connect a USB DAC (Fiio E17 for example, but also tried with others), the Wifi connection no longer works, the cable connection does.
It looks like a bug in the operating system.
I wiped the inner EMMC and re-install Volumio 3.546, it seems OK.
volumiodown
description: Desktop Computer
product: Wyse 3040 Thin Client (07C1)
vendor: Dell Inc.
serial: 5FVV5P2
width: 64 bits
capabilities: smbios-3.0.0 dmi-3.0.0 smp vsyscall32
configuration: boot=normal chassis=desktop family=Wyse sku=07C1 uuid=44454C4C-4600-1056-8056-B5C04F355032
*-core
description: Motherboard
product: 0G56C0
vendor: Dell Inc.
physical id: 0
version: A00
serial: /5FVV5P2/CNWSC0091N00E9/
*-firmware
description: BIOS
vendor: Dell Inc.
physical id: 0
version: 1.2.5
date: 08/20/2018
size: 64KiB
capacity: 16MiB
capabilities: pci pnp upgrade shadowing cdboot bootselect edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb biosbootspecification netboot uefi
*-memory
description: System Memory
physical id: b
slot: System board or motherboard
size: 2GiB
capacity: 2GiB
capabilities: ecc
configuration: errordetection=multi-bit-ecc
*-bank
description: Row of chips DDR3 1600 MHz (0.6 ns)
physical id: 0
slot: Motherboard
size: 2GiB
width: 8 bits
clock: 1600MHz (0.6ns)
*-cache:0
description: L1 cache
physical id: 12
slot: CPU Internal L1
size: 224KiB
capacity: 224KiB
capabilities: internal write-back
configuration: level=1
*-cache:1
description: L2 cache
physical id: 13
slot: CPU Internal L2
size: 2MiB
capacity: 2MiB
capabilities: internal write-back unified
configuration: level=2
*-cpu
description: CPU
product: Intel(R) Atom(TM) x5-Z8350 CPU @ 1.44GHz
vendor: Intel Corp.
physical id: 14
bus info: cpu@0
version: Intel(R) Atom(TM) x5-Z8350 CPU @ 1.44GHz
slot: SOCKET 0
size: 599MHz
capacity: 1920MHz
width: 64 bits
clock: 80MHz
capabilities: lm fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp x86-64 constant_tsc arch_perfmon pebs bts rep_good nopl xtopology tsc_reliable nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes rdrand lahf_lm 3dnowprefetch epb pti ibrs ibpb stibp tsc_adjust smep erms dtherm ida arat cpufreq
configuration: cores=4 enabledcores=4 threads=4
*-pci
description: Host bridge
product: Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SoC Transaction Register
vendor: Intel Corporation
physical id: 100
bus info: pci@0000:00:00.0
version: 36
width: 32 bits
clock: 33MHz
configuration: driver=iosf_mbi_pci
resources: irq:0
*-display
description: VGA compatible controller
product: Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Configuration Registers
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 36
width: 64 bits
clock: 33MHz
capabilities: pm msi vga_controller bus_master cap_list rom
configuration: driver=i915 latency=0
resources: irq:131 memory:90000000-90ffffff memory:80000000-8fffffff ioport:f000(size=64) memory:c0000-dffff
*-generic:0
description: Signal processing controller
product: Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Power Management Controller
vendor: Intel Corporation
physical id: b
bus info: pci@0000:00:0b.0
version: 36
width: 64 bits
clock: 33MHz
capabilities: msi pm cap_list
configuration: driver=proc_thermal latency=0
resources: irq:129 memory:9152c000-9152cfff
*-generic:1
description: SD Host controller
product: Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SDIO Controller
vendor: Intel Corporation
physical id: 11
bus info: pci@0000:00:11.0
version: 36
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=sdhci-pci latency=0
resources: irq:17 memory:91529000-91529fff
*-usb
description: USB controller
product: Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series USB xHCI Controller
vendor: Intel Corporation
physical id: 14
bus info: pci@0000:00:14.0
version: 36
width: 64 bits
clock: 33MHz
capabilities: pm msi xhci bus_master cap_list
configuration: driver=xhci_hcd latency=0
resources: irq:118 memory:91500000-9150ffff
*-usbhost:0
product: xHCI Host Controller
vendor: Linux 5.10.188-volumio xhci-hcd
physical id: 0
bus info: usb@1
logical name: usb1
version: 5.10
capabilities: usb-2.00
configuration: driver=hub slots=7 speed=480Mbit/s
*-usb:0
description: Audio device
product: Combo384 Amanero
vendor: Amanero Technologies
physical id: 3
bus info: usb@1:3
version: 1.97
serial: 413-001
capabilities: usb-2.00 audio-control
configuration: driver=snd-usb-audio speed=480Mbit/s
*-usb:1
description: Generic USB device
product: 802.11ac NIC
vendor: Realtek
physical id: 4
bus info: usb@1:4
version: 2.00
serial: 123456
capabilities: usb-2.00
configuration: driver=rtl8821cu maxpower=500mA speed=480Mbit/s
*-usbhost:1
product: xHCI Host Controller
vendor: Linux 5.10.188-volumio xhci-hcd
physical id: 1
bus info: usb@2
logical name: usb2
version: 5.10
capabilities: usb-3.00
configuration: driver=hub slots=6 speed=5000Mbit/s
*-generic:2
description: Encryption controller
product: Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Trusted Execution Engine
vendor: Intel Corporation
physical id: 1a
bus info: pci@0000:00:1a.0
version: 36
width: 32 bits
clock: 33MHz
capabilities: pm msi bus_master cap_list
configuration: driver=mei_txe latency=0
resources: irq:128 memory:91300000-913fffff memory:91200000-912fffff
*-pci
description: PCI bridge
product: Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port #1
vendor: Intel Corporation
physical id: 1c
bus info: pci@0000:00:1c.0
version: 36
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:117 ioport:e000(size=4096) memory:91400000-914fffff
*-network
description: Ethernet interface
product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:01:00.0
logical name: eth0
version: 15
serial: 6c:2b:59:4c:51:57
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=5.10.188-volumio firmware=rtl8168h-2_0.0.2 02/26/15 latency=0 link=no multicast=yes port=twisted pair
resources: irq:16 ioport:e000(size=256) memory:91404000-91404fff memory:91400000-91403fff
*-isa
description: ISA bridge
product: Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCU
vendor: Intel Corporation
physical id: 1f
bus info: pci@0000:00:1f.0
version: 36
width: 32 bits
clock: 33MHz
capabilities: isa bus_master cap_list
configuration: driver=lpc_ich latency=0
resources: irq:0
*-pnp00:00
product: PnP device PNP0c02
physical id: 1
capabilities: pnp
configuration: driver=system
*-pnp00:01
product: PnP device PNP0501
physical id: 2
capabilities: pnp
configuration: driver=serial
*-pnp00:02
product: PnP device PNP0c02
physical id: 3
capabilities: pnp
configuration: driver=system
*-pnp00:03
product: PnP device PNP0c02
physical id: 4
capabilities: pnp
configuration: driver=system
*-pnp00:04
product: PnP device PNP0b00
physical id: 5
capabilities: pnp
configuration: driver=rtc_cmos
*-network
description: Wireless interface
physical id: 1
bus info: usb@1:4
logical name: wlan0
serial: 20:0d:b0:44:40:99
capabilities: ethernet physical wireless
configuration: broadcast=yes driver=rtl8821cu driverversion=5.10.188-volumio ip=192.168.20.138 multicast=yes wireless=IEEE 802.11AC
System: Host: volumiodown Kernel: 5.10.188-volumio x86_64 bits: 64 compiler: N/A Console: tty 0 dm: N/A
Distro: Debian GNU/Linux 10 (buster)
Machine: Type: Desktop System: Dell product: Wyse 3040 Thin Client v: N/A serial: <filter> Chassis: type: 3 serial: <filter>
Mobo: Dell model: 0G56C0 v: A00 serial: <filter> UEFI: Dell v: 1.2.5 date: 08/20/2018
CPU: Topology: Quad Core model: Intel Atom x5-Z8350 bits: 64 type: MCP arch: Airmont rev: 4 L2 cache: 1024 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 bogomips: 11520
Speed: 999 MHz min/max: 480/1920 MHz Core speeds (MHz): 1: 1441 2: 979 3: 779 4: 819
Graphics: Device-1: Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Configuration Registers vendor: Dell
driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:22b0
Display: tty server: X.org 1.20.4 driver: modesetting unloaded: fbdev,vesa tty: 174x57
Message: Unable to show advanced data. Required tool glxinfo missing.
Audio: Device-1: cht-bsw-rt5672 driver: cht-bsw-rt5672 message: bus/chip ids unavailable
Device-2: Intel HDMI/DP LPE Audio driver: HdmiLpeAudio message: bus/chip ids unavailable
Device-3: MCS type: USB driver: snd-usb-audio bus ID: 1-3:2 chip ID: 16d0:071a serial: <filter>
Sound Server: ALSA v: k5.10.188-volumio
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Dell driver: r8169 v: kernel port: e000
bus ID: 01:00.0 chip ID: 10ec:8168
IF: eth0 state: down mac: <filter>
Device-2: Realtek type: USB driver: rtl8821cu bus ID: 1-4:3 chip ID: 0bda:c811 serial: <filter>
IF: wlan0 state: up mac: <filter>
Drives: Local Storage: total: 7.28 GiB used: 1.05 GiB (14.4%)
ID-1: /dev/mmcblk1 model: H8G4a size: 7.28 GiB serial: <filter> rev: 0x8 scheme: GPT
Partition: ID-1: / size: 3.61 GiB used: 164.4 MiB (4.5%) fs: overlay source: ERR-102
ID-2: /boot size: 168.4 MiB used: 61.2 MiB (36.4%) fs: vfat dev: /dev/mmcblk1p1
Sensors: Missing: Required tool sensors not installed. Check --recommends
Info: Processes: 166 Uptime: 14h 57m Memory: 1.86 GiB used: 718.3 MiB (37.7%) Init: systemd v: 241 runlevel: 5 default: 2
Compilers: gcc: N/A Shell: bash v: 5.0.3 running in: tty 0 (SSH) inxi: 3.0.32
Thanks for the reply, unfortunately it is an attempt that I have already made twice, with the same result, the configuration of my PC is Futro S900, 4 GB of RAM, 500 GB SSD on SATA connector, which contains the operating system and music tracks, such as said a WiFi dongle (I used both a TP-Link Archer T2U and a TP-Link Wireless N Nano) as well as the USB DAC. Could you please specify your configuration better. Thank you.
Just to add another bit of mystery, if I start the Futro with just the Wifi Dongle, and after making sure that the Wifi works, I connect the USB DAC, it is detected, and if I select its use, everything works perfectly, until it turns off. When you turn it back on, all the problems start all over again.
Please post two logs:
One with the first process,
One after reboot, while it’s failing.
Also provide the output in both situations of:
“sudo lshw”
“inxi -Fxxxz”
This is the log of the hot-plugged DAC, working properly
http://logs.volumio.org/volumio/xcFcyOl.html
This is the log of the DAC and WiFi entered cold, and which prevents the WiFi from working, it is understood that given the lack of WiFi connection, to be able to read the log, I also had to connect the LAN cable.
http://logs.volumio.org/volumio/1k50PlF.html
I confess that for:
“sudo lshw”
“inxi -Fxxxz”
I do not know how to do.
Thanks
You need to enable ssh on your device:
and use putty to connect to your device
Second state, WiFi and DAC connected cold and not working:
letto
description: Mini Tower Computer
product: FUTRO S900 (S26361-Kxxx-Vyyy)
vendor: FUJITSU
serial: YLDE033443
width: 64 bits
capabilities: smbios-2.7 dmi-2.7 vsyscall32
configuration: administrator_password=disabled boot=normal chassis=mini-tower power-on_password=disabled sku=S26361-Kxxx-Vyyy uuid=75FDA04A-D1BA-11E1-A7AE-001999DE201E
*-core
description: Motherboard
product: D3003-A1
vendor: FUJITSU
physical id: 0
version: S26361-D3003-A1
serial: 39481275
*-firmware
description: BIOS
vendor: FUJITSU // American Megatrends Inc.
physical id: 0
version: V4.6.4.1 R1.14.0 for D3003-A1x
date: 01/27/2012
size: 64KiB
capacity: 4MiB
capabilities: pci upgrade shadowing cdboot bootselect edd int5printscreen int9keyboard int14serial int17printer acpi usb biosbootspecification uefi
*-cpu
description: CPU
product: AMD G-T44R Processor
vendor: Advanced Micro Devices [AMD]
physical id: 4
bus info: cpu@0
version: AMD G-T44R Processor
serial: To Be Filled By O.E.M.
slot: CPU
size: 1023MHz
capacity: 1200MHz
width: 64 bits
clock: 100MHz
capabilities: lm fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt pdpe1gb rdtscp x86-64 constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid aperfmperf pni monitor ssse3 cx16 popcnt lahf_lm svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch ibs skinit wdt hw_pstate vmmcall arat npt lbrv svm_lock nrip_save pausefilter cpufreq
configuration: cores=1 enabledcores=1
*-cache:0
description: L1 cache
physical id: 5
slot: L1-Cache
size: 64KiB
capacity: 64KiB
capabilities: internal write-back unified
configuration: level=1
*-cache:1
description: L2 cache
physical id: 6
slot: L2-Cache
size: 512KiB
capacity: 512KiB
capabilities: internal varies data
configuration: level=2
*-memory
description: System Memory
physical id: 24
slot: System board or motherboard
size: 4GiB
*-bank:0
description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns)
product: M471B5773DH0-CH9
vendor: Samsung
physical id: 0
serial: 116F2A96
slot: SO-DIMM-1
size: 2GiB
width: 64 bits
clock: 1333MHz (0.8ns)
*-bank:1
description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns)
product: RMT1970ED48E8F1333
vendor: Undefined
physical id: 1
serial: 04F39C01
slot: SO-DIMM-2
size: 2GiB
width: 64 bits
clock: 1333MHz (0.8ns)
*-pci:0
description: Host bridge
product: Family 14h Processor Root Complex
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 100
bus info: pci@0000:00:00.0
version: 00
width: 32 bits
clock: 66MHz
configuration: latency=32
*-display
description: VGA compatible controller
product: Wrestler [Radeon HD 6250]
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 1
bus info: pci@0000:00:01.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: pm pciexpress msi vga_controller bus_master cap_list rom
configuration: driver=radeon latency=0
resources: irq:27 memory:e8000000-efffffff ioport:f000(size=256) memory:feb00000-feb3ffff memory:c0000-dffff
*-multimedia:0
description: Audio device
product: Wrestler HDMI Audio
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 1.1
bus info: pci@0000:00:01.1
version: 00
width: 32 bits
clock: 33MHz
capabilities: pm pciexpress msi bus_master cap_list
configuration: driver=snd_hda_intel latency=0
resources: irq:26 memory:feb44000-feb47fff
*-pci:0
description: PCI bridge
product: Family 14h Processor Root Port
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 4
bus info: pci@0000:00:04.0
version: 00
width: 32 bits
clock: 33MHz
capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:24 ioport:e000(size=4096) memory:f0100000-f02fffff ioport:f0000000(size=1048576)
*-network
description: Ethernet interface
product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:01:00.0
logical name: eth0
version: 06
serial: 00:19:99:de:20:1e
size: 1Gbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=5.10.188-volumio duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=192.168.1.222 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s
resources: irq:16 ioport:e000(size=256) memory:f0004000-f0004fff memory:f0000000-f0003fff
*-sata
description: SATA controller
product: SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 11
bus info: pci@0000:00:11.0
logical name: scsi0
version: 40
width: 32 bits
clock: 66MHz
capabilities: sata ahci_1.0 bus_master cap_list emulated
configuration: driver=ahci latency=32
resources: irq:19 ioport:f140(size=8) ioport:f130(size=4) ioport:f120(size=8) ioport:f110(size=4) ioport:f100(size=16) memory:feb4f000-feb4f3ff
*-disk
description: ATA Disk
product: Crucial_CT525MX3
physical id: 0.0.0
bus info: scsi@0:0.0.0
logical name: /dev/sda
version: R060
serial: 174819E39ED3
size: 489GiB (525GB)
capabilities: gpt-1.00 partitioned partitioned:gpt
configuration: ansiversion=5 guid=2a86335b-f017-41f7-985c-9ee1f36c30fe logicalsectorsize=512 sectorsize=512
*-volume:0
description: Windows FAT volume
vendor: SYSLINUX
physical id: 1
bus info: scsi@0:0.0.0,1
logical name: /dev/sda1
logical name: /boot
version: FAT32
serial: e723-ba6e
size: 169MiB
capacity: 170MiB
capabilities: boot fat initialized
configuration: FATs=2 filesystem=fat label=boot mount.fstype=vfat mount.options=rw,nosuid,nodev,noexec,relatime,fmask=0111,dmask=0000,allow_utime=0022,codepage=437,iocharset=utf8,shortname=mixed,utf8,errors=remount-ro name=primary state=mounted
*-volume:1
description: EXT4 volume
vendor: Linux
physical id: 2
bus info: scsi@0:0.0.0,2
logical name: /dev/sda2
logical name: /imgpart
version: 1.0
serial: fa8b0db3-60cd-4a1e-9126-7af8663fe93c
size: 3452MiB
capabilities: journaled extended_attributes large_files huge_files dir_nlink recover 64bit extents ext4 ext2 initialized
configuration: created=2023-10-13 16:21:06 filesystem=ext4 label=volumio lastmountpoint=/mnt/imgpart modified=2023-10-16 15:08:43 mount.fstype=ext4 mount.options=rw,relatime mounted=2023-10-16 15:08:43 name=primary state=mounted
*-volume:2
description: EXT4 volume
vendor: Linux
physical id: 3
bus info: scsi@0:0.0.0,3
logical name: /dev/sda3
version: 1.0
serial: e34e44f0-6143-43f3-bcfa-e09ef323c6e0
size: 485GiB
capabilities: journaled extended_attributes large_files huge_files dir_nlink recover 64bit extents ext4 ext2 initialized
configuration: created=2023-10-13 16:21:07 filesystem=ext4 label=volumio_data lastmountpoint=/mnt/ext/union modified=2023-10-16 14:55:44 mounted=2023-10-16 14:55:44 name=primary state=clean
*-usb:0
description: USB controller
product: SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 12
bus info: pci@0000:00:12.0
version: 00
width: 32 bits
clock: 66MHz
capabilities: ohci bus_master
configuration: driver=ohci-pci latency=32
resources: irq:18 memory:feb4e000-feb4efff
*-usbhost
product: OHCI PCI host controller
vendor: Linux 5.10.188-volumio ohci_hcd
physical id: 1
bus info: usb@4
logical name: usb4
version: 5.10
capabilities: usb-1.10
configuration: driver=hub slots=5 speed=12Mbit/s
*-usb
description: Audio device
product: Hi-Res Audio
vendor: Synaptics
physical id: 5
bus info: usb@4:5
version: 0.10
serial: 000000000000000000000000
capabilities: usb-2.00 audio-control
configuration: driver=usbhid maxpower=30mA speed=12Mbit/s
*-usb:1
description: USB controller
product: SB7x0/SB8x0/SB9x0 USB EHCI Controller
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 12.2
bus info: pci@0000:00:12.2
version: 00
width: 32 bits
clock: 66MHz
capabilities: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=32
resources: irq:17 memory:feb4d000-feb4d0ff
*-usbhost
product: EHCI Host Controller
vendor: Linux 5.10.188-volumio ehci_hcd
physical id: 1
bus info: usb@1
logical name: usb1
version: 5.10
capabilities: usb-2.00
configuration: driver=hub slots=5 speed=480Mbit/s
*-usb
description: Generic USB device
product: 802.11ac WLAN Adapter
vendor: Realtek
physical id: 1
bus info: usb@1:1
version: 2.00
serial: 00e04c000001
capabilities: usb-2.10
configuration: driver=rtl88XXau maxpower=500mA speed=480Mbit/s
*-usb:2
description: USB controller
product: SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 13
bus info: pci@0000:00:13.0
version: 00
width: 32 bits
clock: 66MHz
capabilities: ohci bus_master
configuration: driver=ohci-pci latency=32
resources: irq:18 memory:feb4c000-feb4cfff
*-usbhost
product: OHCI PCI host controller
vendor: Linux 5.10.188-volumio ohci_hcd
physical id: 1
bus info: usb@5
logical name: usb5
version: 5.10
capabilities: usb-1.10
configuration: driver=hub slots=5 speed=12Mbit/s
*-usb:3
description: USB controller
product: SB7x0/SB8x0/SB9x0 USB EHCI Controller
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 13.2
bus info: pci@0000:00:13.2
version: 00
width: 32 bits
clock: 66MHz
capabilities: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=32
resources: irq:17 memory:feb4b000-feb4b0ff
*-usbhost
product: EHCI Host Controller
vendor: Linux 5.10.188-volumio ehci_hcd
physical id: 1
bus info: usb@2
logical name: usb2
version: 5.10
capabilities: usb-2.00
configuration: driver=hub slots=5 speed=480Mbit/s
*-serial
description: SMBus
product: SBx00 SMBus Controller
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 14
bus info: pci@0000:00:14.0
version: 42
width: 32 bits
clock: 66MHz
configuration: driver=piix4_smbus latency=0
resources: irq:0
*-multimedia:1
description: Audio device
product: SBx00 Azalia (Intel HDA)
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 14.2
bus info: pci@0000:00:14.2
version: 40
width: 64 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=snd_hda_intel latency=32
resources: irq:16 memory:feb40000-feb43fff
*-isa
description: ISA bridge
product: SB7x0/SB8x0/SB9x0 LPC host controller
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 14.3
bus info: pci@0000:00:14.3
version: 40
width: 32 bits
clock: 66MHz
capabilities: isa bus_master
configuration: latency=0
*-pci:1
description: PCI bridge
product: SBx00 PCI to PCI Bridge
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 14.4
bus info: pci@0000:00:14.4
version: 40
width: 32 bits
clock: 66MHz
capabilities: pci subtractive_decode bus_master vga_palette
*-usb:4
description: USB controller
product: SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 14.5
bus info: pci@0000:00:14.5
version: 00
width: 32 bits
clock: 66MHz
capabilities: ohci bus_master
configuration: driver=ohci-pci latency=32
resources: irq:18 memory:feb4a000-feb4afff
*-usbhost
product: OHCI PCI host controller
vendor: Linux 5.10.188-volumio ohci_hcd
physical id: 1
bus info: usb@6
logical name: usb6
version: 5.10
capabilities: usb-1.10
configuration: driver=hub slots=2 speed=12Mbit/s
*-usb:5
description: USB controller
product: SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 16
bus info: pci@0000:00:16.0
version: 00
width: 32 bits
clock: 66MHz
capabilities: ohci bus_master
configuration: driver=ohci-pci latency=32
resources: irq:18 memory:feb49000-feb49fff
*-usbhost
product: OHCI PCI host controller
vendor: Linux 5.10.188-volumio ohci_hcd
physical id: 1
bus info: usb@7
logical name: usb7
version: 5.10
capabilities: usb-1.10
configuration: driver=hub slots=4 speed=12Mbit/s
*-usb:6
description: USB controller
product: SB7x0/SB8x0/SB9x0 USB EHCI Controller
vendor: Advanced Micro Devices, Inc. [AMD/ATI]
physical id: 16.2
bus info: pci@0000:00:16.2
version: 00
width: 32 bits
clock: 66MHz
capabilities: pm debug ehci bus_master cap_list
configuration: driver=ehci-pci latency=32
resources: irq:17 memory:feb48000-feb480ff
*-usbhost
product: EHCI Host Controller
vendor: Linux 5.10.188-volumio ehci_hcd
physical id: 1
bus info: usb@3
logical name: usb3
version: 5.10
capabilities: usb-2.00
configuration: driver=hub slots=4 speed=480Mbit/s
*-pci:1
description: Host bridge
product: Family 12h/14h Processor Function 0
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 101
bus info: pci@0000:00:18.0
version: 43
width: 32 bits
clock: 33MHz
*-pci:2
description: Host bridge
product: Family 12h/14h Processor Function 1
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 102
bus info: pci@0000:00:18.1
version: 00
width: 32 bits
clock: 33MHz
*-pci:3
description: Host bridge
product: Family 12h/14h Processor Function 2
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 103
bus info: pci@0000:00:18.2
version: 00
width: 32 bits
clock: 33MHz
*-pci:4
description: Host bridge
product: Family 12h/14h Processor Function 3
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 104
bus info: pci@0000:00:18.3
version: 00
width: 32 bits
clock: 33MHz
*-pci:5
description: Host bridge
product: Family 12h/14h Processor Function 4
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 105
bus info: pci@0000:00:18.4
version: 00
width: 32 bits
clock: 33MHz
*-pci:6
description: Host bridge
product: Family 12h/14h Processor Function 6
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 106
bus info: pci@0000:00:18.5
version: 00
width: 32 bits
clock: 33MHz
*-pci:7
description: Host bridge
product: Family 12h/14h Processor Function 5
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 107
bus info: pci@0000:00:18.6
version: 00
width: 32 bits
clock: 33MHz
*-pci:8
description: Host bridge
product: Family 12h/14h Processor Function 7
vendor: Advanced Micro Devices, Inc. [AMD]
physical id: 108
bus info: pci@0000:00:18.7
version: 00
width: 32 bits
clock: 33MHz
*-pnp00:00
product: PnP device PNP0c01
physical id: 1
capabilities: pnp
configuration: driver=system
*-pnp00:01
product: PnP device PNP0c02
physical id: 2
capabilities: pnp
configuration: driver=system
*-pnp00:02
product: PnP device PNP0c02
physical id: 3
capabilities: pnp
configuration: driver=system
*-pnp00:03
product: PnP device PNP0b00
physical id: 5
capabilities: pnp
configuration: driver=rtc_cmos
*-pnp00:04
product: PnP device PNP0c02
physical id: 6
capabilities: pnp
configuration: driver=system
*-pnp00:05
product: PnP device PNP0c02
physical id: 7
capabilities: pnp
configuration: driver=system
*-pnp00:06
product: PnP device PNP0303
physical id: 8
capabilities: pnp
configuration: driver=i8042 kbd
*-pnp00:07
product: PnP device PNP0f03
physical id: 9
capabilities: pnp
configuration: driver=i8042 aux
*-pnp00:08
product: PnP device PNP0c02
physical id: a
capabilities: pnp
configuration: driver=system
*-network
description: Wireless interface
physical id: 1
bus info: usb@1:1
logical name: wlan0
serial: 78:8c:b5:b8:be:0c
capabilities: ethernet physical wireless
configuration: broadcast=yes driver=rtl88XXau driverversion=5.10.188-volumio ip=169.254.195.212 multicast=yes wireless=unassociated
volumio@letto:~$
System:
Host: letto Kernel: 5.10.188-volumio x86_64 bits: 64 compiler: N/A
Console: tty 1 dm: N/A Distro: Debian GNU/Linux 10 (buster)
Machine:
Type: Desktop System: FUJITSU product: FUTRO S900 v: N/A serial: <filter>
Chassis: type: 6 serial: <filter>
Mobo: FUJITSU model: D3003-A1 v: S26361-D3003-A1 serial: <filter>
BIOS: FUJITSU // American Megatrends v: 4.6.4.1 R1.14.0 for D3003-A1x
date: 01/27/2012
CPU:
Topology: Single Core model: AMD G-T44R bits: 64 type: UP arch: Bobcat
L2 cache: 512 KiB
flags: lm nx pae sse sse2 sse3 sse4a ssse3 svm bogomips: 2394
Speed: 972 MHz min/max: 800/1200 MHz Core speed (MHz): 1: 972
Graphics:
Device-1: AMD Wrestler [Radeon HD 6250] vendor: Fujitsu Solutions
driver: radeon v: kernel bus ID: 00:01.0 chip ID: 1002:9805
Display: tty server: X.org 1.20.4 driver: ati,radeon
unloaded: fbdev,modesetting,vesa tty: 80x24
Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:
Device-1: AMD Wrestler HDMI Audio vendor: Fujitsu Solutions
driver: snd_hda_intel v: kernel bus ID: 00:01.1 chip ID: 1002:1314
Device-2: AMD SBx00 Azalia vendor: Fujitsu Solutions driver: snd_hda_intel
v: kernel bus ID: 00:14.2 chip ID: 1002:4383
Device-3: Conexant Systems (Rockwell) type: USB
driver: hid-generic,snd-usb-audio,usbhid bus ID: 4-5:2 chip ID: 0572:1b08
serial: <filter>
Sound Server: ALSA v: k5.10.188-volumio
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Fujitsu Solutions driver: r8169 v: kernel port: e000
bus ID: 01:00.0 chip ID: 10ec:8168
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: TP-Link type: USB driver: rtl88XXau bus ID: 1-1:2
chip ID: 2357:011e serial: <filter>
IF: wlan0 state: up mac: <filter>
Drives:
Local Storage: total: 489.05 GiB used: 128.24 GiB (26.2%)
ID-1: /dev/sda vendor: Crucial model: CT525MX300SSD1 size: 489.05 GiB
speed: 6.0 Gb/s serial: <filter> rev: R060 scheme: GPT
Partition:
ID-1: / size: 476.82 GiB used: 127.35 GiB (26.7%) fs: overlay
source: ERR-102
ID-2: /boot size: 168.4 MiB used: 61.2 MiB (36.4%) fs: vfat dev: /dev/sda1
Sensors:
Missing: Required tool sensors not installed. Check --recommends
Info:
Processes: 128 Uptime: 24m Memory: 3.69 GiB used: 455.0 MiB (12.0%)
Init: systemd v: 241 runlevel: 5 default: 2 Compilers: gcc: N/A
Shell: bash v: 5.0.3 running in: tty 1 (SSH) inxi: 3.0.32
volumio@letto:~$