X86 Hardware issues (Graphics, WiFi, Onboard Sound, external DACs, Disks, BIOS/UEFI Boot problems etc.)

No, we do our own kernel compilation, based on the LTS sources released by kernel.org.

We try to keep as close as possible to Ubuntu and Debian kernel configurations, but, as written the other day, we have not changed the sound configurations between 6.6 and 6.12, nothing except for wireless drivers and some extra sensor support.

You have a PM.

Im using Volumio X86 v4.0.73 with usb wifi dongle RTL8188FTV and i can’t connect to router from volumio GUI settings…
In network settings i can found available wifi network, put the password but no connection successfull…

from ssh running

sudo wpa_supplicant -B -i wlan0 -c /etc/wpa_supplicant/wpa_supplicant.conf

the connection start and goes ok, he got ip from router and its visible in GUI interface network settings as active connection… i guess hardware driver is working.

This mean that volumio create wpa_suplicant file with wifi detail but is not operate from volumio settings GUI.

Any others have this bug?

I’d tryed another dongle also, old RT5370 and same issue…

Log is visible at : Log file here

Lshw here :

volumio
    description: Desktop Computer
    product: ESPRIMO Q957
    vendor: FUJITSU
    serial: YMDD058048
    width: 64 bits
    capabilities: smbios-3.0.0 dmi-3.0.0 smp vsyscall32
    configuration: administrator_password=disabled boot=normal chassis=desktop family=ESPRIMO-FTS power-on_password=disabled uuid=d240a367-e7dd-11e8-9d9f-4c52621de137
  *-core
       description: Motherboard
       product: D3513-A1
       vendor: FUJITSU
       physical id: 0
       version: S26361-D3513-A1
       serial: 58062254
     *-firmware
          description: BIOS
          vendor: FUJITSU // American Megatrends Inc.
          physical id: 0
          version: V5.0.0.12 R1.35.0 for D3513-A1x
          date: 10/17/2024
          size: 64KiB
          capacity: 16MiB
          capabilities: pci upgrade shadowing cdboot bootselect edd int5printscreen int9keyboard int14serial int17printer acpi usb biosbootspecification uefi
     *-memory
          description: System Memory
          physical id: e
          slot: System board or motherboard
          size: 8GiB
        *-bank:0
             description: SODIMM DDR4 Synchronous Unbuffered (Unregistered) 2667 MHz (0.4 ns)
             product: RMSA3270ME86H9F-2666
             vendor: Fujitsu
             physical id: 0
             serial: 1184C2A8
             slot: DIMM CHA3
             size: 4GiB
             width: 64 bits
             clock: 2667MHz (0.4ns)
        *-bank:1
             description: SODIMM DDR4 Synchronous Unbuffered (Unregistered) 2667 MHz (0.4 ns)
             product: RMSA3270ME86H9F-2666
             vendor: Fujitsu
             physical id: 1
             serial: 11421724
             slot: DIMM CHB4
             size: 4GiB
             width: 64 bits
             clock: 2667MHz (0.4ns)
     *-cache:0
          description: L1 cache
          physical id: 12
          slot: L1 Cache
          size: 128KiB
          capacity: 128KiB
          capabilities: synchronous internal write-back unified
          configuration: level=1
     *-cache:1
          description: L2 cache
          physical id: 13
          slot: L2 Cache
          size: 512KiB
          capacity: 512KiB
          capabilities: synchronous internal write-back unified
          configuration: level=2
     *-cache:2
          description: L3 cache
          physical id: 14
          slot: L3 Cache
          size: 4MiB
          capacity: 4MiB
          capabilities: synchronous internal write-back unified
          configuration: level=3
     *-cpu
          description: CPU
          product: Intel(R) Core(TM) i3-6300T CPU @ 3.30GHz
          vendor: Intel Corp.
          physical id: 15
          bus info: cpu@0
          version: 6.94.3
          serial: To Be Filled By O.E.M.
          slot: CPU1
          size: 3300MHz
          capacity: 4005MHz
          width: 64 bits
          clock: 100MHz
          capabilities: lm fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx pdpe1gb rdtscp x86-64 constant_tsc art arch_perfmon pebs bts rep_good nopl xtopology nonstop_tsc cpuid aperfmperf pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 sdbg fma cx16 xtpr pdcm pcid sse4_1 sse4_2 x2apic movbe popcnt tsc_deadline_timer aes xsave avx f16c rdrand lahf_lm abm 3dnowprefetch cpuid_fault epb pti ssbd ibrs ibpb stibp tpr_shadow flexpriority ept vpid ept_ad fsgsbase tsc_adjust bmi1 avx2 smep bmi2 erms invpcid mpx rdseed adx smap clflushopt intel_pt xsaveopt xsavec xgetbv1 xsaves dtherm ida arat pln pts hwp hwp_notify hwp_act_window hwp_epp vnmi md_clear flush_l1d arch_capabilities cpufreq
          configuration: cores=2 enabledcores=2 microcode=240 threads=4
     *-pci
          description: Host bridge
          product: Xeon E3-1200 v5/E3-1500 v5/6th Gen Core Processor Host Bridge/DRAM Registers
          vendor: Intel Corporation
          physical id: 100
          bus info: pci@0000:00:00.0
          version: 07
          width: 32 bits
          clock: 33MHz
          configuration: driver=skl_uncore
          resources: irq:0
        *-display
             description: VGA compatible controller
             product: HD Graphics 530
             vendor: Intel Corporation
             physical id: 2
             bus info: pci@0000:00:02.0
             version: 06
             width: 64 bits
             clock: 33MHz
             capabilities: pciexpress msi pm vga_controller bus_master cap_list rom
             configuration: driver=i915 latency=0
             resources: irq:129 memory:ee000000-eeffffff memory:d0000000-dfffffff ioport:f000(size=64) memory:c0000-dffff
        *-usb
             description: USB controller
             product: 200 Series/Z370 Chipset Family USB 3.0 xHCI Controller
             vendor: Intel Corporation
             physical id: 14
             bus info: pci@0000:00:14.0
             version: 00
             width: 64 bits
             clock: 33MHz
             capabilities: pm msi xhci bus_master cap_list
             configuration: driver=xhci_hcd latency=0
             resources: irq:121 memory:ef130000-ef13ffff
           *-usbhost:0
                product: xHCI Host Controller
                vendor: Linux 6.12.57-volumio xhci-hcd
                physical id: 0
                bus info: usb@1
                logical name: usb1
                version: 6.12
                capabilities: usb-2.00
                configuration: driver=hub slots=16 speed=480Mbit/s
              *-usb
                   description: Generic USB device
                   product: 802.11n
                   vendor: Realtek
                   physical id: 3
                   bus info: usb@1:3
                   version: 0.00
                   serial: 00E0254FD3C5
                   capabilities: usb-2.00
                   configuration: driver=rtl8xxxu maxpower=500mA speed=480Mbit/s
           *-usbhost:1
                product: xHCI Host Controller
                vendor: Linux 6.12.57-volumio xhci-hcd
                physical id: 1
                bus info: usb@2
                logical name: usb2
                version: 6.12
                capabilities: usb-3.00
                configuration: driver=hub slots=10 speed=5000Mbit/s
        *-generic UNCLAIMED
             description: Signal processing controller
             product: 200 Series PCH Thermal Subsystem
             vendor: Intel Corporation
             physical id: 14.2
             bus info: pci@0000:00:14.2
             version: 00
             width: 64 bits
             clock: 33MHz
             capabilities: pm msi bus_master cap_list
             configuration: latency=0
             resources: memory:ef14f000-ef14ffff
        *-communication:0
             description: Communication controller
             product: 200 Series PCH CSME HECI #1
             vendor: Intel Corporation
             physical id: 16
             bus info: pci@0000:00:16.0
             version: 00
             width: 64 bits
             clock: 33MHz
             capabilities: pm msi bus_master cap_list
             configuration: driver=mei_me latency=0
             resources: irq:131 memory:ef14e000-ef14efff
        *-communication:1
             description: Serial controller
             product: Intel Corporation
             vendor: Intel Corporation
             physical id: 16.3
             bus info: pci@0000:00:16.3
             version: 00
             width: 32 bits
             clock: 66MHz
             capabilities: msi pm 16550 bus_master cap_list
             configuration: driver=serial latency=0
             resources: irq:19 ioport:f0a0(size=8) memory:ef14d000-ef14dfff
        *-sata
             description: SATA controller
             product: 200 Series PCH SATA controller [AHCI mode]
             vendor: Intel Corporation
             physical id: 17
             bus info: pci@0000:00:17.0
             version: 00
             width: 32 bits
             clock: 66MHz
             capabilities: sata msi pm ahci_1.0 bus_master cap_list
             configuration: driver=ahci latency=0
             resources: irq:123 memory:ef148000-ef149fff memory:ef14c000-ef14c0ff ioport:f090(size=8) ioport:f080(size=4) ioport:f060(size=32) memory:ef14b000-ef14b7ff
        *-pci
             description: PCI bridge
             product: 200 Series PCH PCI Express Root Port #9
             vendor: Intel Corporation
             physical id: 1d
             bus info: pci@0000:00:1d.0
             version: f0
             width: 32 bits
             clock: 33MHz
             capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:120 memory:ef000000-ef0fffff
           *-nvme
                description: NVMe device
                product: LENSE20256GMSP34MEAT2TA
                vendor: Lenovo
                physical id: 0
                bus info: pci@0000:01:00.0
                logical name: /dev/nvme0
                version: 2.3.8341
                serial: 1188050101780
                width: 64 bits
                clock: 33MHz
                capabilities: nvme pm pciexpress msix nvm_express bus_master cap_list
                configuration: driver=nvme latency=0 nqn=nqn.2014.08.org.nvmexpress:17aa17aa1188050101780 state=live
                resources: irq:16 memory:ef000000-ef003fff
              *-namespace:0
                   description: NVMe disk
                   physical id: 0
                   logical name: /dev/ng0n1
              *-namespace:1
                   description: NVMe disk
                   physical id: 1
                   bus info: nvme@0:1
                   logical name: /dev/nvme0n1
                   size: 238GiB (256GB)
                   capabilities: gpt-1.00 partitioned partitioned:gpt
                   configuration: guid=700b9cfd-87c2-4da4-9de0-1eb3e537e29e logicalsectorsize=512 sectorsize=512 wwid=eui.a0329915a7051780
                 *-volume:0
                      description: Windows FAT volume
                      vendor: SYSLINUX
                      physical id: 1
                      bus info: nvme@0:1,1
                      logical name: /dev/nvme0n1p1
                      logical name: /boot
                      version: FAT32
                      serial: e45b-88be
                      size: 364MiB
                      capacity: 365MiB
                      capabilities: boot fat initialized
                      configuration: FATs=2 filesystem=fat label=boot mount.fstype=vfat mount.options=rw,nosuid,nodev,noexec,relatime,fmask=0111,dmask=0000,allow_utime=0022,codepage=437,iocharset=utf8,shortname=mixed,utf8,errors=remount-ro name=primary state=mounted
                 *-volume:1
                      description: EXT4 volume
                      vendor: Linux
                      physical id: 2
                      bus info: nvme@0:1,2
                      logical name: /dev/nvme0n1p2
                      logical name: /imgpart
                      version: 1.0
                      serial: 91e5944e-b0c1-437d-aa36-649214fd2370
                      size: 5455MiB
                      capabilities: journaled extended_attributes large_files huge_files dir_nlink recover 64bit extents ext4 ext2 initialized
                      configuration: created=2025-12-08 18:43:33 filesystem=ext4 label=volumio lastmountpoint=/mnt/imgpart modified=2025-12-09 23:01:13 mount.fstype=ext4 mount.options=rw,relatime mounted=2025-12-09 23:01:13 name=primary state=mounted
                 *-volume:2
                      description: EXT4 volume
                      vendor: Linux
                      physical id: 3
                      bus info: nvme@0:1,3
                      logical name: /dev/nvme0n1p3
                      version: 1.0
                      serial: 4ca5396e-84e2-4830-95d4-914e8829db8b
                      size: 232GiB
                      capabilities: journaled extended_attributes large_files huge_files dir_nlink recover 64bit extents ext4 ext2 initialized
                      configuration: created=2025-12-08 18:43:34 filesystem=ext4 label=volumio_data lastmountpoint=/ modified=2025-12-09 02:16:16 mounted=2025-12-09 01:16:09 name=primary state=clean
        *-isa
             description: ISA bridge
             product: 200 Series PCH LPC Controller (Q270)
             vendor: Intel Corporation
             physical id: 1f
             bus info: pci@0000:00:1f.0
             version: 00
             width: 32 bits
             clock: 33MHz
             capabilities: isa bus_master
             configuration: latency=0
           *-pnp00:00
                product: PnP device PNP0c02
                physical id: 0
                capabilities: pnp
                configuration: driver=system
           *-pnp00:01
                product: PnP device PNP0501
                physical id: 1
                capabilities: pnp
                configuration: driver=serial
           *-pnp00:02
                product: PnP device PNP0c02
                physical id: 2
                capabilities: pnp
                configuration: driver=system
           *-pnp00:03
                product: PnP device PNP0c02
                physical id: 3
                capabilities: pnp
                configuration: driver=system
           *-pnp00:04
                product: PnP device PNP0b00
                physical id: 4
                capabilities: pnp
                configuration: driver=rtc_cmos
           *-pnp00:05
                product: PnP device PNP0c02
                physical id: 5
                capabilities: pnp
                configuration: driver=system
           *-pnp00:06
                product: PnP device PNP0c02
                physical id: 6
                capabilities: pnp
                configuration: driver=system
           *-pnp00:07
                product: PnP device PNP0c02
                physical id: 7
                capabilities: pnp
                configuration: driver=system
           *-pnp00:08
                product: PnP device PNP0c02
                physical id: 8
                capabilities: pnp
                configuration: driver=system
           *-pnp00:09
                product: PnP device FXY0815
                physical id: 9
                capabilities: pnp
                configuration: driver=system
        *-memory UNCLAIMED
             description: Memory controller
             product: 200 Series/Z370 Chipset Family Power Management Controller
             vendor: Intel Corporation
             physical id: 1f.2
             bus info: pci@0000:00:1f.2
             version: 00
             width: 32 bits
             clock: 33MHz (30.3ns)
             capabilities: bus_master
             configuration: latency=0
             resources: memory:ef144000-ef147fff
        *-multimedia
             description: Audio device
             product: 200 Series PCH HD Audio
             vendor: Intel Corporation
             physical id: 1f.3
             bus info: pci@0000:00:1f.3
             logical name: card0
             logical name: /dev/snd/controlC0
             logical name: /dev/snd/hwC0D0
             logical name: /dev/snd/hwC0D2
             logical name: /dev/snd/pcmC0D0c
             logical name: /dev/snd/pcmC0D0p
             logical name: /dev/snd/pcmC0D3p
             logical name: /dev/snd/pcmC0D7p
             logical name: /dev/snd/pcmC0D8p
             version: 00
             width: 64 bits
             clock: 33MHz
             capabilities: pm msi bus_master cap_list
             configuration: driver=snd_hda_intel latency=32
             resources: irq:130 memory:ef140000-ef143fff memory:ef120000-ef12ffff
           *-input:0
                product: HDA Intel PCH Mic
                physical id: 0
                logical name: input4
                logical name: /dev/input/event4
           *-input:1
                product: HDA Intel PCH Line Out
                physical id: 1
                logical name: input5
                logical name: /dev/input/event5
           *-input:2
                product: HDA Intel PCH Front Headphone
                physical id: 2
                logical name: input6
                logical name: /dev/input/event6
           *-input:3
                product: HDA Intel PCH HDMI/DP,pcm=3
                physical id: 3
                logical name: input7
                logical name: /dev/input/event7
           *-input:4
                product: HDA Intel PCH HDMI/DP,pcm=7
                physical id: 4
                logical name: input8
                logical name: /dev/input/event8
           *-input:5
                product: HDA Intel PCH HDMI/DP,pcm=8
                physical id: 5
                logical name: input9
                logical name: /dev/input/event9
        *-serial
             description: SMBus
             product: 200 Series/Z370 Chipset Family SMBus Controller
             vendor: Intel Corporation
             physical id: 1f.4
             bus info: pci@0000:00:1f.4
             version: 00
             width: 64 bits
             clock: 33MHz
             configuration: driver=i801_smbus latency=0
             resources: irq:16 memory:ef14a000-ef14a0ff ioport:f040(size=32)
        *-network
             description: Ethernet interface
             product: Ethernet Connection (2) I219-LM
             vendor: Intel Corporation
             physical id: 1f.6
             bus info: pci@0000:00:1f.6
             logical name: eth0
             version: 00
             serial: 4c:52:62:1d:e1:37
             size: 1Gbit/s
             capacity: 1Gbit/s
             width: 32 bits
             clock: 33MHz
             capabilities: pm msi bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
             configuration: autonegotiation=on broadcast=yes driver=e1000e driverversion=6.12.57-volumio duplex=full firmware=0.8-4 ip=192.168.1.28 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s
             resources: irq:124 memory:ef100000-ef11ffff
  *-power UNCLAIMED
       description: To Be Filled By O.E.M.
       product: To Be Filled By O.E.M.
       vendor: To Be Filled By O.E.M.
       physical id: 1
       version: To Be Filled By O.E.M.
       serial: To Be Filled By O.E.M.
       capacity: 32768mWh
  *-input:0
       product: Sleep Button
       physical id: 2
       logical name: input0
       logical name: /dev/input/event0
       capabilities: platform
  *-input:1
       product: Power Button
       physical id: 3
       logical name: input1
       logical name: /dev/input/event1
       capabilities: platform
  *-input:2
       product: Fujitsu FUJ02E3
       physical id: 4
       logical name: input10
       logical name: /dev/input/event10
       capabilities: platform
  *-input:3
       product: Power Button
       physical id: 5
       logical name: input2
       logical name: /dev/input/event2
       capabilities: platform
  *-input:4
       product: Video Bus
       physical id: 6
       logical name: input3
       logical name: /dev/input/event3
       capabilities: platform
  *-network
       description: Wireless interface
       physical id: 7
       bus info: usb@1:3
       logical name: wlan0
       serial: 00:e0:25:4f:d3:c5
       capabilities: ethernet physical wireless
       configuration: broadcast=yes driver=rtl8xxxu driverversion=6.12.57-volumio firmware=N/A link=no multicast=yes wireless=IEEE 802.11

Please read the opening post and provide the information, so we can help you.

** :orange_book: Reporting**

Im momentary fix wifi issue with this method.

  1. Edit wpa configuration
sudo nano /etc/wpa_supplicant/wpa_supplicant.conf

this is the code

ctrl_interface=DIR=/run/wpa_supplicant GROUP=netdev
update_config=1

network={
    ssid="Put your Wifi_ssid"
    psk="Put your wifi password"
    key_mgmt=WPA-PSK
}

Create a service for Wlan0

sudo nano /etc/systemd/system/wpa_supplicant@wlan0.service

this is the code

[Unit]
Description=WPA supplicant for %i
After=network.target

[Service]
ExecStart=/sbin/wpa_supplicant -i %i -c /etc/wpa_supplicant/wpa_supplicant.conf
Restart=always

[Install]
WantedBy=multi-user.target

Enable the Service and start it

sudo systemctl enable wpa_supplicant@wlan0.service
sudo systemctl start wpa_supplicant@wlan0.service

Unfortunately we cannot accept a fix without more info. Wireless concerns all Volumio platforms, it is not x86-specific.
In order to help you, the Volumio team and community devs need all information as requested in the very first post of this thread.

you’re right, thread purpose is for x86, i’d shared log and lshw response, that’s all they need. wireless issue still here and volumio developer is not fixing it.

Sorry that you did not get my point. To be more precise, without you delivering the data as tequested, it is impossible to help you here.

what you’re talking about? i’d shared the log required. sorry

Iā€˜m really sorry, missed that

Please avoid making assumptions here, there’s some background you’re missing.
The RTL8188FTV simply can’t run hotspot and Wi‑Fi client at the same time.

The correct procedure is:

  • boot the device with eth0 connected
  • disable the hotspot
  • configure your Wi‑Fi normally
  • unplug eth0 and reboot

After that, Wi‑Fi will connect as expected. If it is still failing we need to take a closer look.

nope, sorry but your trick is not working.
when i put wifi password popup ā€œnetwork card correctly rebootedā€ but no connection show.
also rebooting without lan and put again wireless password, still the same.

This happens also with RT5370 usb adapter

Please upgrade to the latest version 4.080. We have spend a lot of hours on this subject.
Make sure to not manipulate any files.
If it is still failing post the following outputs:

systemctl status hostapd.service > /tmp/hostapd_service.txt
journalctl -u hostapd.service --no-pager > /tmp/journalctl_hostapd_service.txt
cat /etc/hostapd/hostapd.conf > /tmp/hostapd_conf.txt
/tmp/wireless.log
1 Like

Just upgraded to 4.080, booted without Lan and wifi connected perfectly.
Im using RT5370 usb adapter.
Thanks for support Wheaten.

1 Like

I can’t enable WiFi in Volume 4. It only accepts wired network connection.

Error: Command failed:
sudo /bin/systemnctl restart
wireless.service Job for
wireless.service failed because the
service did not take the steps required
by its unit configuration. See
ā€œsystemctl status wireless.serviceā€ and
ā€œjournalctl -xeu wireless.serviceā€ for
details.

Can anyone offer me help? Can it be a bug? a driver?

My computer is based on an Intel X86 PC board

Greetings

Hi @gurusto

Could you please drop the details as mentioned in the openings post under:
:orange_book: Reporting

Without that info, we’re basically trying to solve a mystery with a thousand different x86 boards and fifty WiFi chips. That’s less ā€œtech supportā€ and more ā€œlottery of doom."

Help us help you, otherwise we’ll be stuck playing hardware bingo forever!

Thank you for responding.

The hardware worked well with V3. There was an error when installing the new V4 version.

As soon as I can, I’ll give you the full hardware relationship. Reinstall V3 and add system information to extract the device ratio.

CPU : i5-6500
GPU : NVIDIA GTX 1660 Ti, HDMI connect to FHD TV
16G RAM
USB dongle ( 128G and 32G )
use diskpart clean the dongle then write image by win32img or rufus or etcher

Volumio-3.884-2025-12-10-x86_amd64 : boot and install without problem

Volumio-4.073-2025-12-05-x86_amd64
I can see
SYSLINUX 6.04…
Booting Volumio Audiophile Music Player…
then the screen was black ( sometimes pause with the above line )
I have to reset PC to restart but the same result.
Tried onboard HDMI the same result.

Is it PC hardware compatibility issue ?
Any suggestion ? I tried several USB dongle but the same result.

Thank you.

My Hardware for Volumio:

  • OS info

  • Version of Volumio: 4.073

  • Hostname: volumio

  • Kernel: 6.12.57-volumio

  • Governor: performance

  • Uptime: 0 days, 4 Hrs, 15 Minutes, 15 Seconds

  • Network info

  • Interface: eth0

  • IP Address: 192.168.1.43

  • MAC Address: bc:5f:f4:3a:fd:f2

  • Type: wired

  • Speed: 1Gb/s

  • Audio info

  • Hw audio configured: Analog Out

  • Mixer type: Hardware

  • Number of channels: 6

  • Supported sample rate: 44100 48000 96000 192000

  • Board info

  • Manufacturer: To Be Filled By O.E.M.

  • Model: To Be Filled By O.E.M.

  • CPU info

  • Brand: Coreā„¢ i3-2120

  • Model name: Intel(R) Coreā„¢ i3-2120 CPU @ 3.30GHz

  • Speed: 3.3 GHz

  • Family: 6

  • Model: 42

  • Number of cores: 4

  • Physical cores: 2

  • Average load: 6%

  • Temperature: 55°C

  • Memory info

  • Memory: 15309668 Ko

  • Free: 12929504 Ko

  • Used: 2380164 Ko

  • Software info

  • MPD version: Music Player Daemon 0.24.6 (b6f106b+)

  • Bluetooth capabilities version: 5.83

  • AirPlay version: AirPlay 2

  • UPnP renderer: upmpdcli 1.9.7-1~ppa1~bookworm

  • Storage info

  • INTERNAL storage - Size: 443849MB

  • Used: 576MB

  • Available: 420655MB (95%)

I’ve currently chosen the network connection since the Wi-Fi isn’t working. The chip in the Wi-Fi USB dongle is: Realtek RTL8811AU.

Regards

@gurusto, try this sequence for reliable Wi‑Fi setup:

  1. Update to the latest test build. (V4.080)
  2. Connect via Ethernet and complete the initial setup.
  3. While still on Ethernet, configure your Wi‑Fi network.
  4. Shut down the device.
  5. Disconnect the Ethernet cable.
  6. Power it back on — Wi‑Fi should come up normally.

The information you supplied does not give us anything to work with.
Please reply to the very first post in this topic with what we require.