Using Volumio x86 latest version on an old mac mini.
Everything working beautiful.
As I connected this to an big TV screen with a remote keyboard/mouse, would like to increase mouse cursor size.
Being trying with
$ gsettings set org.gnome.desktop.interface cursor-size [sizeInPixels]
command, which does not return any errors, but cursor keeps same size.
Any help, please?
Gracias
Not sure if you have the same issue that we should have solved by capping the resulotion to 1900x1080
Are you using a big TV with a higher than that resolution?
Which exact Volumio version did you install?
People should stop saying âlatestâ 
, this put support on the wrong foot many times.
Version is 3.449 Released Thu 30 Mar 2023.
Not sure how to check resolution or how to cap it!
Update: just uncommented the lines you refer to⌠Rebooting right now
Update2: Resolution changed, but mouse cursor still small
well, the fix is not as it ought to be, but I will have a look.
As for your issue, when the resolution changes and the mouse is still too small/ did not change, then I have no solution, sorryâŚ
Iâm heaving issues with gfx on some of the latest Intel HW and would like to try beta images with 6.1 kernel. Where can I find new image?
Iâve tried few links I found here, but they didnât work.
Please start with describing âissues with gfxâ and âsome of the latest Intel HWâ (use the proper x86 support thread for it).
Asking for newer betas wonât solve your problems because there arenât any and currently there are no plans to produce more or move to 6.1
hdmi ui doesnât start on âBeelink Mini Pc, MiniS with 11th Gen Processor N5095â on both old install and newly flashed USB drive.
Trying to run startx gives following error: EE open /dev/dri/card0: No such file or directory
Sorry, still no relevant information and no idea what âgfxâ means, please read the prerequisites (see OP) for x86 support in the x86 thread.
see here
ohhh sry. âgfxâ means Graphics adapter. Let me add info from the device.
but not here please! Open a topic in thread I supplied
I am not used to write in so technical forum⌠Sorry. Before posting nonsense in such a popular topic: is it okay if I write something like the below?
Hello Volumio users. Iâve read various posts that seem to deal with problems like mine, eventually I still havenât found an answer (or I donât understand the sulution, as I am not an expert). The system is a Dell Wyse 3040 thin client (x64 mini PC) running Volumio 3 (ver. 3.512 released on 2023-06-25). With the analog âHeadset/speakerâ output there are no reproduction problems (stereo). With the HDMI 0 (or HDMI 1) output connected to an Onkyo TX-NR509 AV-receiver indeed, playback works with any format (wav, flac, mp3, DSD, etcâŚ), even in multichannel, except for any file sampled at 44.1kHz. When I try to play files (but also and audio stream like a radio) at 44.1kHz, the system displays the following error: "Failed to open âalsaâ (alsa); error opening ALSA device âvolumioâ; snd_pcm_hw_params_set_buffer_time_near() failed: Invalid argumentâ.
I also generated a log (http://logs.volumio.org/volumio/Km2Sueh.html), if I have correctly understood the guide (Sending logs for troubleshooting - Volumio Documentation).
I am wondering if this problem, which looks to be known, is currently solved (and how) or if it is still unsolved and therefore it is useless to do further tests. Thank you in advance to anyone who can explain me something about.
sudo lshw
volumiowyse
description: Desktop Computer
product: Wyse 3040 Thin Client (07C1)
vendor: Dell Inc.
serial: 1VKL3P2
width: 64 bits
capabilities: smbios-3.0.0 dmi-3.0.0 smp vsyscall32
configuration: boot=normal chassis=desktop family=Wyse sku=07C1 uuid=44454C4C-5600-104B-804C-B1C04F335032
*-core
description: Motherboard
product: 0G56C0
vendor: Dell Inc.
physical id: 0
version: A00
serial: /1VKL3P2/CNWSC008C1001S/
*-firmware
description: BIOS
vendor: Dell Inc.
physical id: 0
version: 1.2.5
date: 08/20/2018
size: 64KiB
capacity: 16MiB
capabilities: pci pnp upgrade shadowing cdboot bootselect edd int13floppy1200 int13floppy720 int13floppy2880 int5printscreen int9keyboard int14serial int17printer acpi usb biosbootspecification netboot uefi
*-memory
description: System Memory
physical id: b
slot: System board or motherboard
size: 2GiB
capacity: 2GiB
capabilities: ecc
configuration: errordetection=multi-bit-ecc
*-bank
description: Row of chips DDR3 1600 MHz (0.6 ns)
physical id: 0
slot: Motherboard
size: 2GiB
width: 8 bits
clock: 1600MHz (0.6ns)
*-cache:0
description: L1 cache
physical id: 12
slot: CPU Internal L1
size: 224KiB
capacity: 224KiB
capabilities: internal write-back
configuration: level=1
*-cache:1
description: L2 cache
physical id: 13
slot: CPU Internal L2
size: 2MiB
capacity: 2MiB
capabilities: internal write-back unified
configuration: level=2
*-cpu
description: CPU
product: Intel(R) Atom(TM) x5-Z8350 CPU @ 1.44GHz
vendor: Intel Corp.
physical id: 14
bus info: cpu@0
version: Intel(R) Atom(TM) x5-Z8350 CPU @ 1.44GHz
slot: SOCKET 0
size: 551MHz
capacity: 1920MHz
width: 64 bits
clock: 80MHz
capabilities: lm fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush dts acpi mmx fxsr sse sse2 ss ht tm pbe syscall nx rdtscp x86-64 constant_tsc arch_perfmon pebs bts rep_good nopl xtopology tsc_reliable nonstop_tsc cpuid aperfmperf tsc_known_freq pni pclmulqdq dtes64 monitor ds_cpl vmx est tm2 ssse3 cx16 xtpr pdcm sse4_1 sse4_2 movbe popcnt tsc_deadline_timer aes rdrand lahf_lm 3dnowprefetch epb pti ibrs ibpb stibp tpr_shadow vnmi flexpriority ept vpid tsc_adjust smep erms dtherm ida arat cpufreq
configuration: cores=4 enabledcores=4 threads=4
*-pci
description: Host bridge
product: Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SoC Transaction Register
vendor: Intel Corporation
physical id: 100
bus info: pci@0000:00:00.0
version: 36
width: 32 bits
clock: 33MHz
configuration: driver=iosf_mbi_pci
resources: irq:0
*-display
description: VGA compatible controller
product: Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Configuration Registers
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
version: 36
width: 64 bits
clock: 33MHz
capabilities: pm msi vga_controller bus_master cap_list rom
configuration: driver=i915 latency=0
resources: irq:131 memory:90000000-90ffffff memory:80000000-8fffffff ioport:f000(size=64) memory:c0000-dffff
*-generic:0
description: Signal processing controller
product: Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Power Management Controller
vendor: Intel Corporation
physical id: b
bus info: pci@0000:00:0b.0
version: 36
width: 64 bits
clock: 33MHz
capabilities: msi pm cap_list
configuration: driver=proc_thermal latency=0
resources: irq:127 memory:9152c000-9152cfff
*-generic:1
description: SD Host controller
product: Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SDIO Controller
vendor: Intel Corporation
physical id: 11
bus info: pci@0000:00:11.0
version: 36
width: 32 bits
clock: 33MHz
capabilities: pm bus_master cap_list
configuration: driver=sdhci-pci latency=0
resources: irq:17 memory:91529000-91529fff
*-usb
description: USB controller
product: Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series USB xHCI Controller
vendor: Intel Corporation
physical id: 14
bus info: pci@0000:00:14.0
version: 36
width: 64 bits
clock: 33MHz
capabilities: pm msi xhci bus_master cap_list
configuration: driver=xhci_hcd latency=0
resources: irq:118 memory:91500000-9150ffff
*-usbhost:0
product: xHCI Host Controller
vendor: Linux 5.10.176-volumio xhci-hcd
physical id: 0
bus info: usb@1
logical name: usb1
version: 5.10
capabilities: usb-2.00
configuration: driver=hub slots=7 speed=480Mbit/s
*-usb
description: Bluetooth wireless interface
product: 802.11ac NIC
vendor: Realtek
physical id: 3
bus info: usb@1:3
version: 2.00
serial: 123456
capabilities: usb-2.00 bluetooth
configuration: driver=rtl8821cu maxpower=500mA speed=480Mbit/s
*-usbhost:1
product: xHCI Host Controller
vendor: Linux 5.10.176-volumio xhci-hcd
physical id: 1
bus info: usb@2
logical name: usb2
version: 5.10
capabilities: usb-3.00
configuration: driver=hub slots=6 speed=5000Mbit/s
*-generic:2
description: Encryption controller
product: Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Trusted Execution Engine
vendor: Intel Corporation
physical id: 1a
bus info: pci@0000:00:1a.0
version: 36
width: 32 bits
clock: 33MHz
capabilities: pm msi bus_master cap_list
configuration: driver=mei_txe latency=0
resources: irq:128 memory:91300000-913fffff memory:91200000-912fffff
*-pci
description: PCI bridge
product: Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port #1
vendor: Intel Corporation
physical id: 1c
bus info: pci@0000:00:1c.0
version: 36
width: 32 bits
clock: 33MHz
capabilities: pci pciexpress msi pm normal_decode bus_master cap_list
configuration: driver=pcieport
resources: irq:117 ioport:e000(size=4096) memory:91400000-914fffff
*-network
description: Ethernet interface
product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:01:00.0
logical name: eth0
version: 15
serial: 6c:2b:59:3b:1a:e5
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=5.10.176-volumio firmware=rtl8168h-2_0.0.2 02/26/15 latency=0 link=no multicast=yes port=twisted pair
resources: irq:16 ioport:e000(size=256) memory:91404000-91404fff memory:91400000-91403fff
*-isa
description: ISA bridge
product: Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCU
vendor: Intel Corporation
physical id: 1f
bus info: pci@0000:00:1f.0
version: 36
width: 32 bits
clock: 33MHz
capabilities: isa bus_master cap_list
configuration: driver=lpc_ich latency=0
resources: irq:0
*-pnp00:00
product: PnP device PNP0c02
physical id: 1
capabilities: pnp
configuration: driver=system
*-pnp00:01
product: PnP device PNP0501
physical id: 2
capabilities: pnp
configuration: driver=serial
*-pnp00:02
product: PnP device PNP0c02
physical id: 3
capabilities: pnp
configuration: driver=system
*-pnp00:03
product: PnP device PNP0c02
physical id: 4
capabilities: pnp
configuration: driver=system
*-pnp00:04
product: PnP device PNP0b00
physical id: 5
capabilities: pnp
configuration: driver=rtc_cmos
*-network
description: Wireless interface
physical id: 1
bus info: usb@1:3
logical name: wlan0
serial: xx:xx:xx:xx:xx:xx
capabilities: ethernet physical wireless
configuration: broadcast=yes driver=rtl8821cu driverversion=5.10.176-volumio ip=192.168.xxx.xxx multicast=yes wireless=IEEE 802.11AC
âinxi -Fxxxzâ
System:
Host: volumiowyse Kernel: 5.10.176-volumio x86_64 bits: 64 compiler: N/A
Console: tty 0 dm: N/A Distro: Debian GNU/Linux 10 (buster)
Machine:
Type: Desktop System: Dell product: Wyse 3040 Thin Client v: N/A
serial: <filter> Chassis: type: 3 serial: <filter>
Mobo: Dell model: 0G56C0 v: A00 serial: <filter> UEFI: Dell v: 1.2.5
date: 08/20/2018
CPU:
Topology: Quad Core model: Intel Atom x5-Z8350 bits: 64 type: MCP
arch: Airmont rev: 4 L2 cache: 1024 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 11520
Speed: 1103 MHz min/max: 480/1920 MHz Core speeds (MHz): 1: 586 2: 968
3: 731 4: 710
Graphics:
Device-1: Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series
PCI Configuration Registers
vendor: Dell driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:22b0
Display: tty server: X.org 1.20.4 driver: i915 tty: 80x24
Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:
Device-1: cht-bsw-rt5672 driver: cht-bsw-rt5672
message: bus/chip ids unavailable
Device-2: Intel HDMI/DP LPE Audio driver: HdmiLpeAudio
message: bus/chip ids unavailable
Sound Server: ALSA v: k5.10.176-volumio
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Dell driver: r8169 v: kernel port: e000 bus ID: 01:00.0
chip ID: 10ec:8168
IF: eth0 state: down mac: <filter>
IF-ID-1: wlan0 state: up mac: <filter>
Drives:
Local Storage: total: 7.28 GiB used: 1.40 GiB (19.2%)
ID-1: /dev/mmcblk1 model: H8G4a size: 7.28 GiB serial: <filter> rev: 0x8
scheme: GPT
Partition:
ID-1: / size: 3.61 GiB used: 527.8 MiB (14.3%) fs: overlay source: ERR-102
ID-2: /boot size: 168.4 MiB used: 61.2 MiB (36.3%) fs: vfat
dev: /dev/mmcblk1p1
Sensors:
System Temperatures: cpu: 50.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 142 Uptime: 1h 26m Memory: 1.86 GiB used: 307.4 MiB (16.1%)
Init: systemd v: 241 runlevel: 5 default: 2 Compilers: gcc: 8.3.0 alt: 8
Shell: bash v: 5.0.3 running in: tty 0 (SSH) inxi: 3.0.32
volumio@volumiowyse:~$ inxi -Fxxxz
System:
Host: volumiowyse Kernel: 5.10.176-volumio x86_64 bits: 64 compiler: N/A
Console: tty 0 dm: N/A Distro: Debian GNU/Linux 10 (buster)
Machine:
Type: Desktop System: Dell product: Wyse 3040 Thin Client v: N/A
serial: <filter> Chassis: type: 3 serial: <filter>
Mobo: Dell model: 0G56C0 v: A00 serial: <filter> UEFI: Dell v: 1.2.5
date: 08/20/2018
CPU:
Topology: Quad Core model: Intel Atom x5-Z8350 bits: 64 type: MCP
arch: Airmont rev: 4 L2 cache: 1024 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 11520
Speed: 634 MHz min/max: 480/1920 MHz Core speeds (MHz): 1: 1037 2: 1271
3: 480 4: 744
Graphics:
Device-1: Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series
PCI Configuration Registers
vendor: Dell driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:22b0
Display: tty server: X.org 1.20.4 driver: i915 tty: 80x24
Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:
Device-1: cht-bsw-rt5672 driver: cht-bsw-rt5672
message: bus/chip ids unavailable
Device-2: Intel HDMI/DP LPE Audio driver: HdmiLpeAudio
message: bus/chip ids unavailable
Sound Server: ALSA v: k5.10.176-volumio
Network:
Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet
vendor: Dell driver: r8169 v: kernel port: e000 bus ID: 01:00.0
chip ID: 10ec:8168
IF: eth0 state: down mac: <filter>
IF-ID-1: wlan0 state: up mac: <filter>
Drives:
Local Storage: total: 7.28 GiB used: 1.40 GiB (19.2%)
ID-1: /dev/mmcblk1 model: H8G4a size: 7.28 GiB serial: <filter> rev: 0x8
scheme: GPT
Partition:
ID-1: / size: 3.61 GiB used: 527.8 MiB (14.3%) fs: overlay source: ERR-102
ID-2: /boot size: 168.4 MiB used: 61.2 MiB (36.3%) fs: vfat
dev: /dev/mmcblk1p1
Sensors:
System Temperatures: cpu: 50.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info:
Processes: 144 Uptime: 1h 27m Memory: 1.86 GiB used: 308.6 MiB (16.2%)
Init: systemd v: 241 runlevel: 5 default: 2 Compilers: gcc: 8.3.0 alt: 8
Shell: bash v: 5.0.3 running in: tty 0 (SSH) inxi: 3.0.32
there means not here 
@Wheaten Could you move these (current included) to the x86 support thread please?
@Ger80s Stefano, I know Dell Wyse 3040 fairly well (sold around 60 of them, pre-configured with Volumio).
Iâll look into this, no further info needed for the time being, thanks.
Hello, Iâm also experiencing the same problem via HDMI output (Volumio3 on x64 PC), indeed no problem using the analog output. The error writes âFailed to open âalsaâ (alsa); error opening ALSA device âvolumioâ; snd_pcm_hw_params_set_buffer_time_near() failed: Invalid argumentâ. Did you find a solution?
Looking at the alsa capabilities of the HDMI audio interface, it appears that it offers sample rates of 32000âŚ192000 Hz with sample formats S16_LE, S24_LE and S32_LE. It is hardware dependent.
This means that 44100, 88200 and 176400 Hz are not part of the supported range.
In case you wish to use HDMI with 44100 Hz files, then I suggest to use the upsampling feature in the Playback Options. 48000Hz would be the nearest, upsampling is lossless but does use a little cpu, which the 3040 should be able to handle. Of course, in case you also have 88200Hz files, upsample to 96000Hz. Sample format can remain the same.
Thank you gkkpch. Sorry for my late reply, I was not well. The answer is clear, what a strange behaivour has this HDMI controller. In fact the solution you suggested is what I am doing now. Do you think the post is usefull to other user and therefore to be published in the topic you suggested few days ago? 
I already moved this to the correct topic, look at the opening post 
It is not really, there are more controllers or drivers which do not support all rates or formats. Sometimes it is also the receiver tv/ av-receiver) not accepting some of the formats. I doubt whether that is the case with yours.
Thank you gkkpch. One question/suggestion more, this time about resampling. Resampling options are about âbit depthâ and âsample frequancyâ (both inclusive the possible option ânativeâ), and quality. After resampling process, the output is always stereo, even if the original surce is multichanel. Suggestion: is it possible to add an option âChannelsâ where the user can choose between e.g. ânativeâ or âstereo downmixâ?
Afaik there is only support for stereo downmix, sorry.
I tried at first using an old asus laptop, with the usb booting, bit it would throw an error. Tried etching with balena and rufus, and still got the same result. So I found an offer on a Kamrui KAMRUI AK1 Pro Mini PC Windows 11 Pro, 8GB RAM 256GB SSD, Intel Celeron N5105 Procesador, Quad Core Micro Computer, with an AMI bios. So I tried running the same usb, and got the same error, which reads as shown below. Any ideas how can I fix this?
