interesting, I was not aware of this fix.
XU4 now also added
Now. With Volumiobuster-3.066 it can scan and indexing NAS fully on my Odroid-N2.
Thank for gkkpch very much.
Thank you for providing this. Although I have raspberry pi 4 also, Odroid XU4 is always my favorite…
Running 3.066-2021-04-16 on a C1+.
Not seeing any PlugIns available. I need my RadioParadise fix.
*** Update *** Just found the “invite” thread, which mentions not to install PlugIns. Guess I need to be patient.
Would it be possible to have an image for 3.101 for a clean flash please?
3.101 will be announced today for RPi, x86 and Tinkerboard.
However, I have not done any alpha testing yet on Odroid devices since 3.066
Perhaps there is time next week, but no promises.
What the improvements of version 3 over version 2?
You don’t really expect to get an answer to that, do you???
Check the forum and read for yourself😉
Please notice we have moved to the Volumio 3 RC1 beta testing for all Odroid devices, see OP.
C0/C1/C1+ (RC1)
Volumiobuster-3.136-2021-11-05-odroidc1
C2 (RC1)
Volumiobuster-3.136-2021-11-05-odroidc2
C4 (RC1)
Volumiobuster-3.136-2021-11-05-odroidc4
N2/N2+ (RC1)
Volumiobuster-3.136-2021-11-05-odroidn2
XU4 (RC1)
Volumiobuster-3.136-2021-11-05-odroidxu4
Great stuff
Can you upgrade using system upgrade in the settings?
Unfortunately not, for a number of technical reasons.
Re-flashing is the only option.
Try with an extra SD in case you want to test.
Edit: that being said, in case you had an earlier volumio 3 version, OTA would work with dev mode set.
Ok it upgraded to 3094 and not 3136. Is there something else I need to do?
No, I need to check why it did not OTA to 3.136
For now, flashing is your only option.
Looks like it’s trying to update to v3.076 from 3.066.
Guess it’s time for a re-flash.
Cheers.
There is no sound on Odroid N2 when using spdif output. (Pin 7) I am able to get the sound through spdif only on version volumio-2.857-2020-12-11-odroidn2. Tried every build after this one without success. Are there special settings for alsamixer or built in digital out is disabled/muted by default?
hmm, have not tried this lately. To rule out any kernel updates, could you tell me what kernel version 2.857 has? (I don’t have a record of that, would have to flash one).
Thanks gkkpch for prompt reply :). 2.857 has 4.9.230+. I use coaxial connection from gpio to my amp and 2.857 works well, however sometimes it is losing network connection, so I have to plug/unplug network cable from Odroid device to get it working again. Starting from version 2.877 and higher I have no sound on coaxial and recent build of Vol3 (3.136) has the same. I did not check 3.039, 3063 and 3066.