X86 Hardware issues (WiFi, DAC, Disks, Boot etc.)

Here are the results:

http://logs.volumio.org/volumio/wszCghH.html

letto
    description: Mini Tower Computer
    product: FUTRO S900 (S26361-Kxxx-Vyyy)
    vendor: FUJITSU
    serial: YLDE033443
    width: 64 bits
    capabilities: smbios-2.7 dmi-2.7 vsyscall32
    configuration: administrator_password=disabled boot=normal chassis=mini-tower power-on_password=disabled sku=S26361-Kxxx-Vyyy uuid=75FDA04A-D1BA-11E1-A7AE-001999DE201E
  *-core
       description: Motherboard
       product: D3003-A1
       vendor: FUJITSU
       physical id: 0
       version: S26361-D3003-A1
       serial: 39481275
     *-firmware
          description: BIOS
          vendor: FUJITSU // American Megatrends Inc.
          physical id: 0
          version: V4.6.4.1 R1.14.0 for D3003-A1x
          date: 01/27/2012
          size: 64KiB
          capacity: 4MiB
          capabilities: pci upgrade shadowing cdboot bootselect edd int5printscreen int9keyboard int14serial int17printer acpi usb biosbootspecification uefi
     *-cpu
          description: CPU
          product: AMD G-T44R Processor
          vendor: Advanced Micro Devices [AMD]
          physical id: 4
          bus info: cpu@0
          version: AMD G-T44R Processor
          serial: To Be Filled By O.E.M.
          slot: CPU
          size: 1018MHz
          capacity: 1200MHz
          width: 64 bits
          clock: 100MHz
          capabilities: lm fpu fpu_exception wp vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat pse36 clflush mmx fxsr sse sse2 syscall nx mmxext fxsr_opt pdpe1gb rdtscp x86-64 constant_tsc rep_good nopl nonstop_tsc cpuid extd_apicid aperfmperf pni monitor ssse3 cx16 popcnt lahf_lm svm extapic cr8_legacy abm sse4a misalignsse 3dnowprefetch ibs skinit wdt hw_pstate vmmcall arat npt lbrv svm_lock nrip_save pausefilter cpufreq
          configuration: cores=1 enabledcores=1
        *-cache:0
             description: L1 cache
             physical id: 5
             slot: L1-Cache
             size: 64KiB
             capacity: 64KiB
             capabilities: internal write-back unified
             configuration: level=1
        *-cache:1
             description: L2 cache
             physical id: 6
             slot: L2-Cache
             size: 512KiB
             capacity: 512KiB
             capabilities: internal varies data
             configuration: level=2
     *-memory
          description: System Memory
          physical id: 24
          slot: System board or motherboard
          size: 4GiB
        *-bank:0
             description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns)
             product: M471B5773DH0-CH9
             vendor: Samsung
             physical id: 0
             serial: 116F2A96
             slot: SO-DIMM-1
             size: 2GiB
             width: 64 bits
             clock: 1333MHz (0.8ns)
        *-bank:1
             description: SODIMM DDR3 Synchronous 1333 MHz (0.8 ns)
             product: RMT1970ED48E8F1333
             vendor: Undefined
             physical id: 1
             serial: 04F39C01
             slot: SO-DIMM-2
             size: 2GiB
             width: 64 bits
             clock: 1333MHz (0.8ns)
     *-pci:0
          description: Host bridge
          product: Family 14h Processor Root Complex
          vendor: Advanced Micro Devices, Inc. [AMD]
          physical id: 100
          bus info: pci@0000:00:00.0
          version: 00
          width: 32 bits
          clock: 66MHz
          configuration: latency=32
        *-display
             description: VGA compatible controller
             product: Wrestler [Radeon HD 6250]
             vendor: Advanced Micro Devices, Inc. [AMD/ATI]
             physical id: 1
             bus info: pci@0000:00:01.0
             version: 00
             width: 32 bits
             clock: 33MHz
             capabilities: pm pciexpress msi vga_controller bus_master cap_list rom
             configuration: driver=radeon latency=0
             resources: irq:27 memory:e8000000-efffffff ioport:f000(size=256) memory:feb00000-feb3ffff memory:c0000-dffff
        *-multimedia:0
             description: Audio device
             product: Wrestler HDMI Audio
             vendor: Advanced Micro Devices, Inc. [AMD/ATI]
             physical id: 1.1
             bus info: pci@0000:00:01.1
             version: 00
             width: 32 bits
             clock: 33MHz
             capabilities: pm pciexpress msi bus_master cap_list
             configuration: driver=snd_hda_intel latency=0
             resources: irq:26 memory:feb44000-feb47fff
        *-pci:0
             description: PCI bridge
             product: Family 14h Processor Root Port
             vendor: Advanced Micro Devices, Inc. [AMD]
             physical id: 4
             bus info: pci@0000:00:04.0
             version: 00
             width: 32 bits
             clock: 33MHz
             capabilities: pci pm pciexpress msi ht normal_decode bus_master cap_list
             configuration: driver=pcieport
             resources: irq:24 ioport:e000(size=4096) memory:f0100000-f02fffff ioport:f0000000(size=1048576)
           *-network
                description: Ethernet interface
                product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
                vendor: Realtek Semiconductor Co., Ltd.
                physical id: 0
                bus info: pci@0000:01:00.0
                logical name: eth0
                version: 06
                serial: 00:19:99:de:20:1e
                size: 1Gbit/s
                capacity: 1Gbit/s
                width: 64 bits
                clock: 33MHz
                capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation
                configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=5.10.188-volumio duplex=full firmware=rtl_nic/rtl8168e-2.fw ip=192.168.1.222 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s
                resources: irq:16 ioport:e000(size=256) memory:f0004000-f0004fff memory:f0000000-f0003fff
        *-sata
             description: SATA controller
             product: SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
             vendor: Advanced Micro Devices, Inc. [AMD/ATI]
             physical id: 11
             bus info: pci@0000:00:11.0
             logical name: scsi0
             version: 40
             width: 32 bits
             clock: 66MHz
             capabilities: sata ahci_1.0 bus_master cap_list emulated
             configuration: driver=ahci latency=32
             resources: irq:19 ioport:f140(size=8) ioport:f130(size=4) ioport:f120(size=8) ioport:f110(size=4) ioport:f100(size=16) memory:feb4f000-feb4f3ff
           *-disk
                description: ATA Disk
                product: Crucial_CT525MX3
                physical id: 0.0.0
                bus info: scsi@0:0.0.0
                logical name: /dev/sda
                version: R060
                serial: 174819E39ED3
                size: 489GiB (525GB)
                capabilities: gpt-1.00 partitioned partitioned:gpt
                configuration: ansiversion=5 guid=2a86335b-f017-41f7-985c-9ee1f36c30fe logicalsectorsize=512 sectorsize=512
              *-volume:0
                   description: Windows FAT volume
                   vendor: SYSLINUX
                   physical id: 1
                   bus info: scsi@0:0.0.0,1
                   logical name: /dev/sda1
                   logical name: /boot
                   version: FAT32
                   serial: e723-ba6e
                   size: 169MiB
                   capacity: 170MiB
                   capabilities: boot fat initialized
                   configuration: FATs=2 filesystem=fat label=boot mount.fstype=vfat mount.options=rw,nosuid,nodev,noexec,relatime,fmask=0111,dmask=0000,allow_utime=0022,codepage=437,iocharset=utf8,shortname=mixed,utf8,errors=remount-ro name=primary state=mounted
              *-volume:1
                   description: EXT4 volume
                   vendor: Linux
                   physical id: 2
                   bus info: scsi@0:0.0.0,2
                   logical name: /dev/sda2
                   logical name: /imgpart
                   version: 1.0
                   serial: fa8b0db3-60cd-4a1e-9126-7af8663fe93c
                   size: 3452MiB
                   capabilities: journaled extended_attributes large_files huge_files dir_nlink recover 64bit extents ext4 ext2 initialized
                   configuration: created=2023-10-13 16:21:06 filesystem=ext4 label=volumio lastmountpoint=/mnt/imgpart modified=2023-10-17 08:52:48 mount.fstype=ext4 mount.options=rw,relatime mounted=2023-10-17 08:52:48 name=primary state=mounted
              *-volume:2
                   description: EXT4 volume
                   vendor: Linux
                   physical id: 3
                   bus info: scsi@0:0.0.0,3
                   logical name: /dev/sda3
                   version: 1.0
                   serial: e34e44f0-6143-43f3-bcfa-e09ef323c6e0
                   size: 485GiB
                   capabilities: journaled extended_attributes large_files huge_files dir_nlink recover 64bit extents ext4 ext2 initialized
                   configuration: created=2023-10-13 16:21:07 filesystem=ext4 label=volumio_data lastmountpoint=/mnt/ext/union modified=2023-10-16 17:08:05 mounted=2023-10-16 17:08:05 name=primary state=clean
        *-usb:0
             description: USB controller
             product: SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
             vendor: Advanced Micro Devices, Inc. [AMD/ATI]
             physical id: 12
             bus info: pci@0000:00:12.0
             version: 00
             width: 32 bits
             clock: 66MHz
             capabilities: ohci bus_master
             configuration: driver=ohci-pci latency=32
             resources: irq:18 memory:feb4e000-feb4efff
           *-usbhost
                product: OHCI PCI host controller
                vendor: Linux 5.10.188-volumio ohci_hcd
                physical id: 1
                bus info: usb@4
                logical name: usb4
                version: 5.10
                capabilities: usb-1.10
                configuration: driver=hub slots=5 speed=12Mbit/s
              *-usb
                   description: Audio device
                   product: Hi-Res Audio
                   vendor: Synaptics
                   physical id: 5
                   bus info: usb@4:5
                   version: 0.10
                   serial: 000000000000000000000000
                   capabilities: usb-2.00 audio-control
                   configuration: driver=usbhid maxpower=30mA speed=12Mbit/s
        *-usb:1
             description: USB controller
             product: SB7x0/SB8x0/SB9x0 USB EHCI Controller
             vendor: Advanced Micro Devices, Inc. [AMD/ATI]
             physical id: 12.2
             bus info: pci@0000:00:12.2
             version: 00
             width: 32 bits
             clock: 66MHz
             capabilities: pm debug ehci bus_master cap_list
             configuration: driver=ehci-pci latency=32
             resources: irq:17 memory:feb4d000-feb4d0ff
           *-usbhost
                product: EHCI Host Controller
                vendor: Linux 5.10.188-volumio ehci_hcd
                physical id: 1
                bus info: usb@1
                logical name: usb1
                version: 5.10
                capabilities: usb-2.00
                configuration: driver=hub slots=5 speed=480Mbit/s
              *-usb
                   description: Generic USB device
                   product: 802.11ac WLAN Adapter
                   vendor: Realtek
                   physical id: 1
                   bus info: usb@1:1
                   version: 2.00
                   serial: 00e04c000001
                   capabilities: usb-2.10
                   configuration: driver=rtl88XXau maxpower=500mA speed=480Mbit/s
        *-usb:2
             description: USB controller
             product: SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
             vendor: Advanced Micro Devices, Inc. [AMD/ATI]
             physical id: 13
             bus info: pci@0000:00:13.0
             version: 00
             width: 32 bits
             clock: 66MHz
             capabilities: ohci bus_master
             configuration: driver=ohci-pci latency=32
             resources: irq:18 memory:feb4c000-feb4cfff
           *-usbhost
                product: OHCI PCI host controller
                vendor: Linux 5.10.188-volumio ohci_hcd
                physical id: 1
                bus info: usb@5
                logical name: usb5
                version: 5.10
                capabilities: usb-1.10
                configuration: driver=hub slots=5 speed=12Mbit/s
        *-usb:3
             description: USB controller
             product: SB7x0/SB8x0/SB9x0 USB EHCI Controller
             vendor: Advanced Micro Devices, Inc. [AMD/ATI]
             physical id: 13.2
             bus info: pci@0000:00:13.2
             version: 00
             width: 32 bits
             clock: 66MHz
             capabilities: pm debug ehci bus_master cap_list
             configuration: driver=ehci-pci latency=32
             resources: irq:17 memory:feb4b000-feb4b0ff
           *-usbhost
                product: EHCI Host Controller
                vendor: Linux 5.10.188-volumio ehci_hcd
                physical id: 1
                bus info: usb@2
                logical name: usb2
                version: 5.10
                capabilities: usb-2.00
                configuration: driver=hub slots=5 speed=480Mbit/s
        *-serial
             description: SMBus
             product: SBx00 SMBus Controller
             vendor: Advanced Micro Devices, Inc. [AMD/ATI]
             physical id: 14
             bus info: pci@0000:00:14.0
             version: 42
             width: 32 bits
             clock: 66MHz
             configuration: driver=piix4_smbus latency=0
             resources: irq:0
        *-multimedia:1
             description: Audio device
             product: SBx00 Azalia (Intel HDA)
             vendor: Advanced Micro Devices, Inc. [AMD/ATI]
             physical id: 14.2
             bus info: pci@0000:00:14.2
             version: 40
             width: 64 bits
             clock: 33MHz
             capabilities: pm bus_master cap_list
             configuration: driver=snd_hda_intel latency=32
             resources: irq:16 memory:feb40000-feb43fff
        *-isa
             description: ISA bridge
             product: SB7x0/SB8x0/SB9x0 LPC host controller
             vendor: Advanced Micro Devices, Inc. [AMD/ATI]
             physical id: 14.3
             bus info: pci@0000:00:14.3
             version: 40
             width: 32 bits
             clock: 66MHz
             capabilities: isa bus_master
             configuration: latency=0
        *-pci:1
             description: PCI bridge
             product: SBx00 PCI to PCI Bridge
             vendor: Advanced Micro Devices, Inc. [AMD/ATI]
             physical id: 14.4
             bus info: pci@0000:00:14.4
             version: 40
             width: 32 bits
             clock: 66MHz
             capabilities: pci subtractive_decode bus_master vga_palette
        *-usb:4
             description: USB controller
             product: SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
             vendor: Advanced Micro Devices, Inc. [AMD/ATI]
             physical id: 14.5
             bus info: pci@0000:00:14.5
             version: 00
             width: 32 bits
             clock: 66MHz
             capabilities: ohci bus_master
             configuration: driver=ohci-pci latency=32
             resources: irq:18 memory:feb4a000-feb4afff
           *-usbhost
                product: OHCI PCI host controller
                vendor: Linux 5.10.188-volumio ohci_hcd
                physical id: 1
                bus info: usb@6
                logical name: usb6
                version: 5.10
                capabilities: usb-1.10
                configuration: driver=hub slots=2 speed=12Mbit/s
        *-usb:5
             description: USB controller
             product: SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
             vendor: Advanced Micro Devices, Inc. [AMD/ATI]
             physical id: 16
             bus info: pci@0000:00:16.0
             version: 00
             width: 32 bits
             clock: 66MHz
             capabilities: ohci bus_master
             configuration: driver=ohci-pci latency=32
             resources: irq:18 memory:feb49000-feb49fff
           *-usbhost
                product: OHCI PCI host controller
                vendor: Linux 5.10.188-volumio ohci_hcd
                physical id: 1
                bus info: usb@7
                logical name: usb7
                version: 5.10
                capabilities: usb-1.10
                configuration: driver=hub slots=4 speed=12Mbit/s
        *-usb:6
             description: USB controller
             product: SB7x0/SB8x0/SB9x0 USB EHCI Controller
             vendor: Advanced Micro Devices, Inc. [AMD/ATI]
             physical id: 16.2
             bus info: pci@0000:00:16.2
             version: 00
             width: 32 bits
             clock: 66MHz
             capabilities: pm debug ehci bus_master cap_list
             configuration: driver=ehci-pci latency=32
             resources: irq:17 memory:feb48000-feb480ff
           *-usbhost
                product: EHCI Host Controller
                vendor: Linux 5.10.188-volumio ehci_hcd
                physical id: 1
                bus info: usb@3
                logical name: usb3
                version: 5.10
                capabilities: usb-2.00
                configuration: driver=hub slots=4 speed=480Mbit/s
     *-pci:1
          description: Host bridge
          product: Family 12h/14h Processor Function 0
          vendor: Advanced Micro Devices, Inc. [AMD]
          physical id: 101
          bus info: pci@0000:00:18.0
          version: 43
          width: 32 bits
          clock: 33MHz
     *-pci:2
          description: Host bridge
          product: Family 12h/14h Processor Function 1
          vendor: Advanced Micro Devices, Inc. [AMD]
          physical id: 102
          bus info: pci@0000:00:18.1
          version: 00
          width: 32 bits
          clock: 33MHz
     *-pci:3
          description: Host bridge
          product: Family 12h/14h Processor Function 2
          vendor: Advanced Micro Devices, Inc. [AMD]
          physical id: 103
          bus info: pci@0000:00:18.2
          version: 00
          width: 32 bits
          clock: 33MHz
     *-pci:4
          description: Host bridge
          product: Family 12h/14h Processor Function 3
          vendor: Advanced Micro Devices, Inc. [AMD]
          physical id: 104
          bus info: pci@0000:00:18.3
          version: 00
          width: 32 bits
          clock: 33MHz
     *-pci:5
          description: Host bridge
          product: Family 12h/14h Processor Function 4
          vendor: Advanced Micro Devices, Inc. [AMD]
          physical id: 105
          bus info: pci@0000:00:18.4
          version: 00
          width: 32 bits
          clock: 33MHz
     *-pci:6
          description: Host bridge
          product: Family 12h/14h Processor Function 6
          vendor: Advanced Micro Devices, Inc. [AMD]
          physical id: 106
          bus info: pci@0000:00:18.5
          version: 00
          width: 32 bits
          clock: 33MHz
     *-pci:7
          description: Host bridge
          product: Family 12h/14h Processor Function 5
          vendor: Advanced Micro Devices, Inc. [AMD]
          physical id: 107
          bus info: pci@0000:00:18.6
          version: 00
          width: 32 bits
          clock: 33MHz
     *-pci:8
          description: Host bridge
          product: Family 12h/14h Processor Function 7
          vendor: Advanced Micro Devices, Inc. [AMD]
          physical id: 108
          bus info: pci@0000:00:18.7
          version: 00
          width: 32 bits
          clock: 33MHz
     *-pnp00:00
          product: PnP device PNP0c01
          physical id: 1
          capabilities: pnp
          configuration: driver=system
     *-pnp00:01
          product: PnP device PNP0c02
          physical id: 2
          capabilities: pnp
          configuration: driver=system
     *-pnp00:02
          product: PnP device PNP0c02
          physical id: 3
          capabilities: pnp
          configuration: driver=system
     *-pnp00:03
          product: PnP device PNP0b00
          physical id: 5
          capabilities: pnp
          configuration: driver=rtc_cmos
     *-pnp00:04
          product: PnP device PNP0c02
          physical id: 6
          capabilities: pnp
          configuration: driver=system
     *-pnp00:05
          product: PnP device PNP0c02
          physical id: 7
          capabilities: pnp
          configuration: driver=system
     *-pnp00:06
          product: PnP device PNP0303
          physical id: 8
          capabilities: pnp
          configuration: driver=i8042 kbd
     *-pnp00:07
          product: PnP device PNP0f03
          physical id: 9
          capabilities: pnp
          configuration: driver=i8042 aux
     *-pnp00:08
          product: PnP device PNP0c02
          physical id: a
          capabilities: pnp
          configuration: driver=system
  *-network
       description: Wireless interface
       physical id: 1
       bus info: usb@1:1
       logical name: wlan0
       serial: 78:8c:b5:b8:be:0c
       capabilities: ethernet physical wireless
       configuration: broadcast=yes driver=rtl88XXau driverversion=5.10.188-volumio ip=169.254.195.212 multicast=yes wireless=unassociated
volumio@letto:~$ inxi -Fxxxz
System:    Host: letto Kernel: 5.10.188-volumio x86_64 bits: 64 compiler: N/A Console: tty 0 dm: N/A
           Distro: Debian GNU/Linux 10 (buster)
Machine:   Type: Desktop System: FUJITSU product: FUTRO S900 v: N/A serial: <filter> Chassis: type: 6 serial: <filter>
           Mobo: FUJITSU model: D3003-A1 v: S26361-D3003-A1 serial: <filter> BIOS: FUJITSU // American Megatrends
           v: 4.6.4.1 R1.14.0 for D3003-A1x date: 01/27/2012
CPU:       Topology: Single Core model: AMD G-T44R bits: 64 type: UP arch: Bobcat L2 cache: 512 KiB
           flags: lm nx pae sse sse2 sse3 sse4a ssse3 svm bogomips: 2394
           Speed: 978 MHz min/max: 800/1200 MHz Core speed (MHz): 1: 978
Graphics:  Device-1: Advanced Micro Devices [AMD/ATI] Wrestler [Radeon HD 6250] vendor: Fujitsu Solutions driver: radeon
           v: kernel bus ID: 00:01.0 chip ID: 1002:9805
           Display: tty server: X.org 1.20.4 driver: ati,radeon unloaded: fbdev,modesetting,vesa tty: 189x49
           Message: Unable to show advanced data. Required tool glxinfo missing.
Audio:     Device-1: Advanced Micro Devices [AMD/ATI] Wrestler HDMI Audio vendor: Fujitsu Solutions driver: snd_hda_intel
           v: kernel bus ID: 00:01.1 chip ID: 1002:1314
           Device-2: Advanced Micro Devices [AMD/ATI] SBx00 Azalia vendor: Fujitsu Solutions driver: snd_hda_intel v: kernel
           bus ID: 00:14.2 chip ID: 1002:4383
           Device-3: Conexant Systems (Rockwell) type: USB driver: hid-generic,snd-usb-audio,usbhid bus ID: 4-5:2
           chip ID: 0572:1b08 serial: <filter>
           Sound Server: ALSA v: k5.10.188-volumio
Network:   Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Fujitsu Solutions driver: r8169 v: kernel
           port: e000 bus ID: 01:00.0 chip ID: 10ec:8168
           IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
           Device-2: TP-Link type: USB driver: rtl88XXau bus ID: 1-1:2 chip ID: 2357:011e serial: <filter>
           IF: wlan0 state: up mac: <filter>
Drives:    Local Storage: total: 489.05 GiB used: 131.34 GiB (26.9%)
           ID-1: /dev/sda vendor: Crucial model: CT525MX300SSD1 size: 489.05 GiB speed: 6.0 Gb/s serial: <filter> rev: R060
           scheme: GPT
Partition: ID-1: / size: 476.82 GiB used: 130.46 GiB (27.4%) fs: overlay source: ERR-102
           ID-2: /boot size: 168.4 MiB used: 61.2 MiB (36.4%) fs: vfat dev: /dev/sda1
Sensors:   Missing: Required tool sensors not installed. Check --recommends
Info:      Processes: 125 Uptime: 17m Memory: 3.69 GiB used: 447.1 MiB (11.8%) Init: systemd v: 241 runlevel: 5 default: 2
           Compilers: gcc: N/A Shell: bash v: 5.0.3 running in: tty 0 (SSH) inxi: 3.0.32
volumio@letto:~$

For completeness of information, the DAC in question is a USB dongle for headphone output, 24 bit 96 khz, but I get the same behavior with a Fiio Alpen E17 DAC.

yes, I saw it is a USB class 1 device.
LAN was connected before Volumio started and I see no gaps for the 3-4 minutes and the other 1-2 minutes.
Please follow the instructions carefully.
When eth is connected before Volumio starts I cannot properly see what wlan does without eth

I apologize, but that’s not the case, I followed the instructions scrupulously, I start the PC with the 2 dongles inserted, wait 5 minutes, connect the LAN cable, wait 2 minutes, access via LAN to extract the logs, I’m an IT technician, so I have a bit of experience, I’m only saying this to minimize the possibility of error, no controversy, my LAN has a static IP, maybe this was misleading, I don’t know.
Thanks for your patience, if you need anything else I’m here.

1 Like

Modified the post to make it more readable.

Hello everyone.
I wanted to try Volumio on an Intel NUC and an external USB HD with flac/mp3 music.
Installation and configuration OK and works well connected to an amplifier with DAC.
The big problem is that if I turn on the NUC with the USB HD connected, Volumio doesn’t start and the Linux login remains on the video and the interface doesn’t load.
If instead I disconnect the USB HD and start it it works correctly and only then can I connect the HD.
What can I do?
Thank you

Can you share some pictures as mentioning “Linux login remains on the video and the interface doesn’t load” doesn’t reveal much.

Please take a look at the top post and provide what is requested.

So if I understand correctly, Volumio is installed on an internal disk or similar, and the archives are on the external USB disk, if so, plausibly your PC tries to boot from the USB disk, which does not contain a bootable operating system, and everything stops, you should enter the PC bios and set the one containing the Volumio operating system as the startup disk, if this is complicated for you, as a temporary remedy, when you turn on the NUC you should repeatedly press a key that is used to start the function of “Boot Select”, in NUCs it should be F10, but I couldn’t swear to it, and select the correct boot device, unfortunately until you change the BIOS settings, you will have to do it every time, but better than not being able to boot never, and in any case this will give you certainty that you have identified the problem.
Greetings

1 Like

Strange, the log says eth0 is getting a carrier and an ip before the boot process is finished and the log shows no 5 minutes gap, still don’t like it.
The dongle was recognized and the driver loaded, but wlan gets an internal ip address 169.254.xxx.xxx.
This would mean that the ip configuration failed.
I honestly have no idea why that would be and why that would be an OS issue, wireless is handled by the wireless.js script from Volumio.

Have you tried switching to different ports, e.g dongle to the front port, dac at the backpanel?

Does not look like a boot issue but something while starting Volumio.
Let’s wait for the log and see, you might have to submit the log from the commandline (I can’t recall how to to that, @Wheaten ??) or from an externnal browser.

From the terminal execute:
node /volumio/logsubmit.js

Copy/Paste the link here in the post:
http://logs.volumio.org/volumio/WRvWAxW.html

image

Yes, swapping on USB ports is one of the first things I tried, and I’ve tried again now, with no results.

In the meantime I got 2 more USB DACs, a Topping DX3 Pro and a Fiio BRT5, both obviously connected via USB, and magically, without changing anything, these work.

Another strange thing that I noticed, while doing experiments, is that by accessing via cable (while Wifi is not working) changing something in the wifi card (for example switching from dynamic IP, and subsequently to Static IP, after having selected SSID and provided password , the Wifi starts working, turning it off and on again, everything stops again.

And finally the final twist, by removing the T2U WiFi dongle and replacing it with TP-Link Wireless N Nano, even the DACs that didn’t work before now work, although I must say that the connection is really slow and you lose a lot of the enjoyment of the system.

At this point, with all these variables in play, it seems to me that pulling the rabbit out of the hole is almost impossible, only the tests and the experience acquired remain, which I think could be useful to other users in the future.
Greetings.
Thanks for your patience.

Thanks for the replies.
Booting occurs from the PC’s SSD disk, not from USB.
I’m sure because on the video I see some Linux commands being executed and then it gets stuck on the Linux login page and the Volumio program isn’t loaded and the network isn’t seen.
I will try to look at how to get the log log.
Thanks again.
PS Io sono italiano.

1 Like

Yes, I apologize, I read in a rush and didn’t quite understand the terms of the problem.
PS Sono italiano anch’io :grinning: :grinning: :grinning:

he llegado a instalar volumio 2. con exito pero sin que llegue a funcionar el wi-fi. tiene solucion?
usa la tarjeta de sonido Intel PRO/Wireless 2200BG
por lo que he podido ver en internet
traducido con google translate

I have managed to install volumio 2.xx successfully but without the Wi-Fi working. it has a solution?
uses Intel PRO/Wireless 2200BG sound card
from what I have been able to see on the internet
translated with google translate

There is no way to get the Intel PRO/Wireless 2200BG working on Volumio 2, it would need a driver and firmware update. However, Volumio2 is EOL for a long time already, meaning no support and no more updates.
For Intel RPO/Wireless 2200BG support you must install Volumio 3, unfortunately it is only available for 64-bit devices.

Hello,

I’ve Just Installed Volumio 3.546 on Intel NUC11 Essential NUC11ATKC4 [16GB RAM & 512GB NVME SSD] But the UI Won’t Load at All. I’m Stuck at the “Welcome to Volumio” Screen When Connected to an External Monitor Via HDMI.

I Can Access the UI Via the App on My Phone and Everything Seems to Be Working. Wi-Fi and LAN Works Flawlessly. But WebUI via HDMI Won’t Get Past the “Welcome to Volumio” Screen.

I’ve Tried Restarting/Reinstalling the mpd Service But No Luck.

Also. Volumio Works Flawlessly on my Intel NUC7CJYHN [8GB RAM & 120GB SATA SSD]. Even the WebUI via HDMI Works Well. But for Some Reason WebUI via HDMI Doesn’t Work on the Intel NUC11 Essential.

Please Help Me.

Log #1- http://logs.volumio.org/volumio/uMkHxmg.html

Log #2- http://logs.volumio.org/volumio/QQ34EbV.html

I am writing to understand why Volumio OS latest version does not recognize the Mini PC’s internal wifi card. The wifi card is a Realtek 8821CE Wireless LAN802.11ac PCI-E NIC. I tried two external dongles and Volumio sees them and I can connect with wifi, but when I remove the dongle, Volumio doesn’t see the internal wifi card. Even if I try to restart and select the wifi network it doesn’t see the internal wifi card. Compatibility issue with Realtek chip 8821CE? Someone have the same problem? Thanks

Very simple just finish the first configuration wizard on your phone or PC, then once done, restart the system.

I recommend doing a factory reset before doing that, as you’ve installed some custom stuff which will break updates otherwise.

This won’t help. The graphics device on a NUC11 is not supported with our 5.10 kernel, the NUC is too new for it.
Volumio on a NUC11 will be headless for the current versions and nothing quick can be done about it.

1 Like