Raspberry 7" display on RPi4

Help and Support
2

Hey @Fredothegreat,

Your report is missing critical information required for investigation. The Trixie test confirms your hardware works, so this is a Volumio-specific configuration issue - but I cannot diagnose without proper details.

Critical ambiguities:

  1. Volumio version unknown

    • “unsure of version but the updater says its the latest” is not actionable
    • Touch Display plugin 3.5.1 is a Volumio 3 version
    • Volumio 4 uses Touch Display 3.6.0
    • Run this via SSH or check in UI: cat /etc/os-release
    • Report exact VERSION_ID value

  2. Installation method potentially destructive

    • “raspberry image writer” - did you use Raspberry Pi Imager?
    • If yes: did you apply ANY OS customization settings (hostname, SSH, WiFi, user/password)?
    • Raspberry Pi Imager customization creates a firstrun.sh script designed for Raspberry Pi OS
    • Volumio has its own first boot sequence - applying customization WILL break it
    • Correct procedure: Flash with NO customization whatsoever, configure via Volumio wizard only

  3. Display model unknown

    • “new 7 inch display” is insufficient
    • Is it: Official RPi 7" DSI (v1), Official RPi 7" DSI v2 (1280x720), HDMI display, other?
    • Provide exact manufacturer and model number

  4. Raspberry Pi4 model unknown

  5. Current userconfig.txt contents unknown

    • You said you “tried a few changes” - what is the current state?
    • Provide complete contents of /boot/userconfig.txt

  6. Log link missing - MANDATORY

    • Generate log from http://volumio.local/dev (or http://[your-volumio-IP]/dev)
    • Paste the resulting URL here
    • No log = no help. Ever.

Provide:

  • Exact Volumio version
  • Exact Raspberry Pi model (revision code)
  • Exact display model with manufacturer
  • Complete /boot/userconfig.txt contents
  • Step-by-step description of Raspberry Pi Imager usage (every option selected)
  • Log link from /dev page

Kind Regards,