[PLUGIN] Touch Display

display_rotate=1 -----> 3

in userconfig or Touch plugin?

userc

Then finally play with the zoom setting and you can use peppy as overlay :slight_smile:

thanks Gelo5

1 Like

thanks Wheaton

1 Like

And what should @nerd do with the new monitor now?

enjoy it… :wink:

Use it to stir his coffee :rofl:

1 Like

First of all, I would like to thank you for the support, which was sometimes a bit tedious for everyone involved but excellent, which has now brought a great result for me and probably also for all Volumio “nerds”; Thanks and best regards, by
ReyNee from Radio-M1, the only one…

AOR, Melodic Mainstream & Classic Rock

Radio M1, the only one…

one of the pioneers of the private radio channel from the exposed site"Schwarzenstein(3368m)" to north/southtyrol- and southgermany and often by FM overreach to Sweden ;-with AOR radio program supplied.

M1 keep on rockin '…℗ m1-publishing

dedicated to Claus Fuehrer.

Radio-M1, the only one…

www.radio-m1.com

http://lautfm-m1.radio.at/

http://lautfm-m1.radio.de/

http://lautfm-m1.rad.io/

und international über die TuneIn App

http://tunein.com/radio/Radio-M1-s152326/

http://www.facebook.com/radiom1

℗ m1-publishing, dedicated to Claus Fuehrer.

DJ: M1-Publishing Association (Schwarzenstein)
m1

now it works, backup your SD with “Win32DiskImager” !!!

yeah, yes Wheaton thank you…

Who is Wheaton???

1 Like

sorry , Wheaten…:man_facepalming:
I’m too excited after the success of the seemingly never ending story…:rofl:


1 Like

From such excitement children can be… watch out :wink:

1 Like

Hi. Can someone tell me: I bought a 1920x480 monitor (https://sl.aliexpress.ru/p?key=ar0DrJC). When connected to volumio x86, the sensor works (touchscreen). It does not respond to clicks on Pi4.
Userconfig.txt:
hdmi_timings=480 0 30 30 30 1920 0 6 6 6 0 0 0 60 0 55296000 8
hdmi_group=2
hdmi_mode=87
hdmi_drive=2
display_rotate=1
hdmi_force_mode=1
framebuffer_width=1920
framebuffer_height=480
max_framebuffer_width=1920
max_framebuffer_height=1920

Volumio ver. 3.757
Touch Display ver. 3.5.0
Raspberry Pi4 + ChipDipDAC

Is the image on the screen(Rpi)?
Is the USB cable connected from rpi to the Touch port?
A second USB cable is connected from the rpi to the power outlet (or a separate power supply)?

image on the screen ок
one port microusb in display connect to usb in pi4
No second usb port in display
When connected to volumio x86, the sensor works (touchscreen)

Please check if running

sudo apt-get -y install xserver-xorg-input-evdev

sudo cp /usr/share/X11/xorg.conf.d/10-evdev.conf /etc/X11/xorg.conf.d/45-evdev.conf

and restarting the Touch Display plugin helps.