Thanks! But since the touch function has fortunately been working since the USB cable was changed, this was no longer necessary. 
Thanks gvolt, another question dev. I’m having a hard time to fix this and i don’t know what’s the real problem. The touch screen function is fine. however, i don’t if the spotify and webradio is compatible with the latest prototype volumio image.
Can you check this video. https://drive.google.com/file/d/1pFpY-JjTXFEp2CZdiCatI0E-EZ5aETA-/view?usp=drivesdk
Sorry, I can’t help with your spotify and webradio issues. Also, as suggested earlier, I recommend to open a dedicated thread for these issues since this thread is about the Touch Display plugin. 
Ohh isee gvolt, thank you so much for your help.
1 Like
Gvolt, can i ask? Where do i find the peppymeter screensaver link to download in this thread?
1 Like
Thanks gvolt! Another question can i? I don’t know how to enable the keyboard so i can type to log the google that spotify required or do i need to post on the spotify thread?
Take a look here:
1 Like
Hi wheaten! It’s been a while.
I just want to ask you how to fix this, I’m having a hard time to install touch display plugin on raspberry pi 4 model b 2gb with a latest version 3.669. My internet is connected to router direct wire. And my internet speed is pretty good. I set test mode on.
After configuring the webui, i set my time-date and set the parameters also.
Then after installing the plugin this is showing on my laptop screen.
Downloading plugin at https://plugins.volumio.workers.dev/pluginsv2/downloadLatest/touch_display/volumio/buster/armhf
END DOWNLOAD: https://plugins.volumio.workers.dev/pluginsv2/downloadLatest/touch_display/volumio/buster/armhf
Creating install location
Unpacking plugin
Checking that the plugin is suitable for this version of Volumio The plugin can be used with this version of Volumio
Checking for duplicate plugin
Copying plugin to location
Installing necessary utilities
Re-synchronizing package index files from their sources
Hit:1 https://deb.nodesource.com/node_14.x buster InRelease
Hit:2 http://archive.raspberrypi.org/debian buster InRelease
Get:3 http://raspbian.raspberrypi.org/raspbian buster InRelease [15.0 kB]
Reading package lists...
Running apt-get update failed
Plugin failed to install!
Cleaning up...
Removing dependencies
Reading package lists...
Building dependency tree...
Reading state information...
Reading package lists...
Building dependency tree...
Reading state information...
Reading package lists...
Building dependency tree...
Reading state information...
Reading package lists...
Building dependency tree...
Reading state information...
Package 'chromium-browser' is not installed, so not removed
0 upgraded, 0 newly installed, 0 to remove and 2 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
Package 'openbox' is not installed, so not removed
0 upgraded, 0 newly installed, 0 to remove and 2 not upgraded.
Reading package lists...
Building dependency tree...
Reading state information...
Deleting /opt/volumiokiosk.sh
Deleting /data/volumiokiosk
Deleting /lib/systemd/system/volumio-kiosk.service
Enabling login prompt
Done
Removing plugin directory /data/plugins/user_interface/touch_display
An error occurred while installing the plugin Error
Removing temporary directory /tmp/touch_display-ebaKpxi3Jjyou mention laptop display?
There is no need to install this plugin on a x86 device
Hi,
Seems I need some help.
Running a waveshare 2.8Inch DSI IPS screen.
Wiki: Waveshare 2.8 inch, DSI, IPS
Added to userconfig.txt:
# Add your custom config.txt options to this file, which will be preserved during updates
dtoverlay=vc4-kms-v3d
dtoverlay=vc4-kms-dsi-waveshare-panel,2_8_inch
#### Touch Display rotation setting below: do not alter ####
display_lcd_rotate=1
display_hdmi_rotate=1
So far so good. Layout is rotated correct (90deg), but the touchscreen is acting weird.
The rotation of the touch orientation is correct, but I can only use it for about 70% of the screen width.
The area in the red box;
Installed xinput-calibrator, but the calibration is failing as I can’t calibrate the right part:
Any suggestion?
Why do you aways find something useful?
It seems this is the case indeed, need to look into this, where to modify this within Volumio.
Thanks!!
it’s been fixed on kernel 6.6
you can download this file, rename it to “vc4-kms-dsi-waveshare-panel-fixed.dtbo” and place it on /boot/overlays
then you can use this fixed overlay changing the declaration in userconfig.txt
dtoverlay=vc4-kms-dsi-waveshare-panel-fixed,2_8_inch
Darn, love the community.
Dario is faster than I can read. Yeah I know that’s nothing new, he does it all the time…
But yes that fixed the stuff.
Thanks @gvolt for pointing me in the correct direction
Thanks @Darmur for giving the solution, faster than I could read the topic.
1 Like
So… i have set my volumio unit to turn off screen after 2 hours of inactivity (via the touch screen plugin)
To wake it up again i just start playing a song, and after aprox. 10 seconds the display turns on again…
The problem is that after that the display doesn’t turn off again after 2 hours of inactivity but stays on for days or until i turn off or restarts my unit.
Ant fix for this or am i doing something wrong? =)
Please provide some more information:
- What Volumio version are you using?
- What is the Touch Display plugin version?
- What is the brand and exact model name of the display?
- What hardware is Volumio running on?
- Does the same issue occur if you set a shorter time (e.g. 20 min.) to switch off the screen?
1.Latest version volumio
2.Latest vetsion touch display
3.Display is 7.9" waveshare
4.Volumio running on Rpi4 with IQ audio pro dac
5. No, dont matter what time i set it to
Thx !
Instead of “latest” please give the concrete version numbers.
ad 1: 3.695?
ad 2: 3.4.0?
HDMI or DSI?
Volumio version 3.703
Touch Display version 3.40
Display is HDMI
But i had this problem with previous versions also !