Installing LMS along Volumio

Created a new topic to avoid spamming on the LMS-Docker plugin

You can always remove the plugin and install LMS manually. (you’ll loose all settings and need to configure LMS again)

Factory reset
upgraded to Volumio V3.429

sudo dpkg-reconfigure tzdata
sudo apt-get update
sudo apt-get install libcrypt-openssl-rsa-perl
wget https://downloads.slimdevices.com/LogitechMediaServer_v8.3.0/logitechmediaserver_8.3.0_all.deb
sudo dpkg -i logitechmediaserver_8.3.0_all.deb
rm logitechmediaserver_8.3.0_all.deb
1 Like

Thanks. Updated the same

iam getting the following error while installing:

An error occurred in install_docker.sh: line 10: apt-get install -y ca-certificates curl gnupg lsb-release
Installation cannot proceed.

Nowhere I gave the instruction to update the docker, hence I said, remove it and install LMS…

I flashed a new volumio and tried to install as per your above instructions, but iam getting following error:
login as: volumio
volumio@192.168.1.7’s password:

                       ___
                      /\_ \                        __
         __  __    ___\//\ \    __  __    ___ ___ /\_\    ___
        /\ \/\ \  / __`\\ \ \  /\ \/\ \ /' __` __`\/\ \  / __`\
        \ \ \_/ |/\ \L\ \\_\ \_\ \ \_\ \/\ \/\ \/\ \ \ \/\ \L\ \
         \ \___/ \ \____//\____\\ \____/\ \_\ \_\ \_\ \_\ \____/
          \/__/   \/___/ \/____/ \/___/  \/_/\/_/\/_/\/_/\/___/

             Free Audiophile Linux Music Player - Version 3.0

          © 2015-2021 Michelangelo Guarise - Volumio Team - Volumio.org

Volumio Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Welcome to Volumio for Raspberry Pi (5.10.92-v7+ armv7l)
volumio@volumiorpi:~$ sudo apt-get update && sudo apt-get install libcrypt-openssl-rsa-perl
Get:1 https://deb.nodesource.com/node_14.x buster InRelease [4584 B]
Get:2 http://raspbian.raspberrypi.org/raspbian buster InRelease [15.0 kB]
Get:3 http://archive.raspberrypi.org/debian buster InRelease [32.6 kB]
Get:4 https://deb.nodesource.com/node_14.x buster/main armhf Packages [786 B]
Get:5 http://raspbian.raspberrypi.org/raspbian buster/main armhf Packages [13.0 MB]
Get:6 http://archive.raspberrypi.org/debian buster/main armhf Packages [392 kB]
Get:7 http://raspbian.raspberrypi.org/raspbian buster/contrib armhf Packages [58.8 kB]
Get:8 http://raspbian.raspberrypi.org/raspbian buster/non-free armhf Packages [104 kB]
Get:9 http://raspbian.raspberrypi.org/raspbian buster/rpi armhf Packages [1360 B]
Fetched 13.6 MB in 18s (751 kB/s)
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following additional packages will be installed:
  libcrypt-openssl-bignum-perl libcrypt-openssl-random-perl
The following NEW packages will be installed:
  libcrypt-openssl-bignum-perl libcrypt-openssl-random-perl libcrypt-openssl-rsa-perl
0 upgraded, 3 newly installed, 0 to remove and 16 not upgraded.
Need to get 59.0 kB of archives.
After this operation, 212 kB of additional disk space will be used.
Do you want to continue? [Y/n] y
Err:1 http://raspbian.mirror.net.in/raspbian/raspbian buster/main armhf libcrypt-openssl-bignum-perl armhf 0.09-1+b1
  Connection failed [IP: 103.195.68.3 80]
Err:2 http://raspbian.mirror.net.in/raspbian/raspbian buster/main armhf libcrypt-openssl-random-perl armhf 0.15-1+b1
  Connection failed [IP: 103.195.68.3 80]
Err:3 http://raspbian.mirror.net.in/raspbian/raspbian buster/main armhf libcrypt-openssl-rsa-perl armhf 0.31-1+b1
  Connection failed [IP: 103.195.68.3 80]
E: Failed to fetch http://raspbian.mirror.net.in/raspbian/raspbian/pool/main/libc/libcrypt-openssl-bignum-perl/libcrypt-openssl-bignum-perl_0.09-1+b1_armhf.deb  Connection failed [IP: 103.195.68.3 80]
E: Failed to fetch http://raspbian.mirror.net.in/raspbian/raspbian/pool/main/libc/libcrypt-openssl-random-perl/libcrypt-openssl-random-perl_0.15-1+b1_armhf.deb  Connection failed [IP: 103.195.68.3 80]
E: Failed to fetch http://raspbian.mirror.net.in/raspbian/raspbian/pool/main/libc/libcrypt-openssl-rsa-perl/libcrypt-openssl-rsa-perl_0.31-1+b1_armhf.deb  Connection failed [IP: 103.195.68.3 80]
E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?
volumio@volumiorpi:~$ sudo apt-get update && sudo apt-get install libcrypt-openssl-rsa-perl
Hit:1 http://raspbian.raspberrypi.org/raspbian buster InRelease
Hit:2 http://archive.raspberrypi.org/debian buster InRelease
Hit:3 https://deb.nodesource.com/node_14.x buster InRelease
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following additional packages will be installed:
  libcrypt-openssl-bignum-perl libcrypt-openssl-random-perl
The following NEW packages will be installed:
  libcrypt-openssl-bignum-perl libcrypt-openssl-random-perl libcrypt-openssl-rsa-perl
0 upgraded, 3 newly installed, 0 to remove and 16 not upgraded.
Need to get 59.0 kB of archives.
After this operation, 212 kB of additional disk space will be used.
Do you want to continue? [Y/n] y
Err:1 http://raspbian.mirror.net.in/raspbian/raspbian buster/main armhf libcrypt-openssl-bignum-perl armhf 0.09-1+b1
  Connection failed [IP: 103.195.68.3 80]
Err:2 http://raspbian.mirror.net.in/raspbian/raspbian buster/main armhf libcrypt-openssl-random-perl armhf 0.15-1+b1
  Connection failed [IP: 103.195.68.3 80]
Err:3 http://raspbian.mirror.net.in/raspbian/raspbian buster/main armhf libcrypt-openssl-rsa-perl armhf 0.31-1+b1
  Connection failed [IP: 103.195.68.3 80]
E: Failed to fetch http://raspbian.mirror.net.in/raspbian/raspbian/pool/main/libc/libcrypt-openssl-bignum-perl/libcrypt-openssl-bignum-perl_0.09-1+b1_armhf.deb  Connection failed [IP: 103.195.68.3 80]
E: Failed to fetch http://raspbian.mirror.net.in/raspbian/raspbian/pool/main/libc/libcrypt-openssl-random-perl/libcrypt-openssl-random-perl_0.15-1+b1_armhf.deb  Connection failed [IP: 103.195.68.3 80]
E: Failed to fetch http://raspbian.mirror.net.in/raspbian/raspbian/pool/main/libc/libcrypt-openssl-rsa-perl/libcrypt-openssl-rsa-perl_0.31-1+b1_armhf.deb  Connection failed [IP: 103.195.68.3 80]
E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?
volumio@volumiorpi:~$ sudo apt-get update && sudo apt-get install libcrypt-openssl-rsa-perl
Hit:1 https://deb.nodesource.com/node_14.x buster InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian buster InRelease
Hit:3 http://archive.raspberrypi.org/debian buster InRelease
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following additional packages will be installed:
  libcrypt-openssl-bignum-perl libcrypt-openssl-random-perl
The following NEW packages will be installed:
  libcrypt-openssl-bignum-perl libcrypt-openssl-random-perl libcrypt-openssl-rsa-perl
0 upgraded, 3 newly installed, 0 to remove and 16 not upgraded.
Need to get 59.0 kB of archives.
After this operation, 212 kB of additional disk space will be used.
Do you want to continue? [Y/n] y
Err:1 http://raspbian.mirror.net.in/raspbian/raspbian buster/main armhf libcrypt-openssl-bignum-perl armhf 0.09-1+b1
  Connection failed [IP: 103.195.68.3 80]
Err:2 http://raspbian.mirror.net.in/raspbian/raspbian buster/main armhf libcrypt-openssl-random-perl armhf 0.15-1+b1
  Connection failed [IP: 103.195.68.3 80]
Err:3 http://raspbian.mirror.net.in/raspbian/raspbian buster/main armhf libcrypt-openssl-rsa-perl armhf 0.31-1+b1
  Connection failed [IP: 103.195.68.3 80]
E: Failed to fetch http://raspbian.mirror.net.in/raspbian/raspbian/pool/main/libc/libcrypt-openssl-bignum-perl/libcrypt-openssl-bignum-perl_0.09-1+b1_armhf.deb  Connection failed [IP: 103.195.68.3 80]
E: Failed to fetch http://raspbian.mirror.net.in/raspbian/raspbian/pool/main/libc/libcrypt-openssl-random-perl/libcrypt-openssl-random-perl_0.15-1+b1_armhf.deb  Connection failed [IP: 103.195.68.3 80]
E: Failed to fetch http://raspbian.mirror.net.in/raspbian/raspbian/pool/main/libc/libcrypt-openssl-rsa-perl/libcrypt-openssl-rsa-perl_0.31-1+b1_armhf.deb  Connection failed [IP: 103.195.68.3 80]
E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?
volumio@volumiorpi:~$ sudo apt-get update && sudo apt-get install libcrypt-openssl-rsa-perl
Hit:1 https://deb.nodesource.com/node_14.x buster InRelease
Hit:2 http://archive.raspberrypi.org/debian buster InRelease
Hit:3 http://raspbian.raspberrypi.org/raspbian buster InRelease
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following additional packages will be installed:
  libcrypt-openssl-bignum-perl libcrypt-openssl-random-perl
The following NEW packages will be installed:
  libcrypt-openssl-bignum-perl libcrypt-openssl-random-perl libcrypt-openssl-rsa-perl
0 upgraded, 3 newly installed, 0 to remove and 16 not upgraded.
Need to get 59.0 kB of archives.
After this operation, 212 kB of additional disk space will be used.
Do you want to continue? [Y/n] y
Err:1 http://raspbian.mirror.net.in/raspbian/raspbian buster/main armhf libcrypt-openssl-bignum-perl armhf 0.09-1+b1
  Connection failed [IP: 103.195.68.3 80]
Err:2 http://raspbian.mirror.net.in/raspbian/raspbian buster/main armhf libcrypt-openssl-random-perl armhf 0.15-1+b1
  Connection failed [IP: 103.195.68.3 80]
Err:3 http://raspbian.mirror.net.in/raspbian/raspbian buster/main armhf libcrypt-openssl-rsa-perl armhf 0.31-1+b1
  Connection failed [IP: 103.195.68.3 80]
E: Failed to fetch http://raspbian.mirror.net.in/raspbian/raspbian/pool/main/libc/libcrypt-openssl-bignum-perl/libcrypt-openssl-bignum-perl_0.09-1+b1_armhf.deb  Connection failed [IP: 103.195.68.3 80]
E: Failed to fetch http://raspbian.mirror.net.in/raspbian/raspbian/pool/main/libc/libcrypt-openssl-random-perl/libcrypt-openssl-random-perl_0.15-1+b1_armhf.deb  Connection failed [IP: 103.195.68.3 80]
E: Failed to fetch http://raspbian.mirror.net.in/raspbian/raspbian/pool/main/libc/libcrypt-openssl-rsa-perl/libcrypt-openssl-rsa-perl_0.31-1+b1_armhf.deb  Connection failed [IP: 103.195.68.3 80]
E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?
volumio@volumiorpi:~$ sudo apt-get update && sudo apt-get install libcrypt-openssl-rsa-perl
Hit:1 https://deb.nodesource.com/node_14.x buster InRelease
Hit:2 http://raspbian.raspberrypi.org/raspbian buster InRelease
Hit:3 http://archive.raspberrypi.org/debian buster InRelease
Reading package lists... Done
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following additional packages will be installed:
  libcrypt-openssl-bignum-perl libcrypt-openssl-random-perl
The following NEW packages will be installed:
  libcrypt-openssl-bignum-perl libcrypt-openssl-random-perl libcrypt-openssl-rsa-perl
0 upgraded, 3 newly installed, 0 to remove and 16 not upgraded.
Need to get 59.0 kB of archives.
After this operation, 212 kB of additional disk space will be used.
Do you want to continue? [Y/n] y
Err:1 http://raspbian.mirror.net.in/raspbian/raspbian buster/main armhf libcrypt-openssl-bignum-perl armhf 0.09-1+b1
  Connection failed [IP: 103.195.68.3 80]
Err:2 http://raspbian.mirror.net.in/raspbian/raspbian buster/main armhf libcrypt-openssl-random-perl armhf 0.15-1+b1
  Connection failed [IP: 103.195.68.3 80]
Err:3 http://raspbian.mirror.net.in/raspbian/raspbian buster/main armhf libcrypt-openssl-rsa-perl armhf 0.31-1+b1
  Connection failed [IP: 103.195.68.3 80]
E: Failed to fetch http://raspbian.mirror.net.in/raspbian/raspbian/pool/main/libc/libcrypt-openssl-bignum-perl/libcrypt-openssl-bignum-perl_0.09-1+b1_armhf.deb  Connection failed [IP: 103.195.68.3 80]
E: Failed to fetch http://raspbian.mirror.net.in/raspbian/raspbian/pool/main/libc/libcrypt-openssl-random-perl/libcrypt-openssl-random-perl_0.15-1+b1_armhf.deb  Connection failed [IP: 103.195.68.3 80]
E: Failed to fetch http://raspbian.mirror.net.in/raspbian/raspbian/pool/main/libc/libcrypt-openssl-rsa-perl/libcrypt-openssl-rsa-perl_0.31-1+b1_armhf.deb  Connection failed [IP: 103.195.68.3 80]
E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?
volumio@volumiorpi:~$ wget https://downloads.slimdevices.com/LogitechMediaServer_v8.3.0/logitechmediaserver_8.3.0_all.deb
--2023-02-17 14:40:03--  https://downloads.slimdevices.com/LogitechMediaServer_v8.3.0/logitechmediaserver_8.3.0_all.deb
Resolving downloads.slimdevices.com (downloads.slimdevices.com)... 52.84.12.79, 52.84.12.73, 52.84.12.14, ...
Connecting to downloads.slimdevices.com (downloads.slimdevices.com)|52.84.12.79|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 52860924 (50M) [application/x-troff-man]
Saving to: 'logitechmediaserver_8.3.0_all.deb'

logitechmediaserver_8.3.0_a 100%[===========================================>]  50.41M  5.09MB/s    in 7.9s

2023-02-17 14:40:19 (6.37 MB/s) - 'logitechmediaserver_8.3.0_all.deb' saved [52860924/52860924]
volumio@volumiorpi:~$ wget https://downloads.slimdevices.com/LogitechMediaServer_v8.3.0/logitechmediaserver_8.3.0_all.deb
--2023-02-17 14:40:51--  https://downloads.slimdevices.com/LogitechMediaServer_v8.3.0/logitechmediaserver_8.3.0_all.deb
Resolving downloads.slimdevices.com (downloads.slimdevices.com)... 52.84.12.79, 52.84.12.73, 52.84.12.14, ...
Connecting to downloads.slimdevices.com (downloads.slimdevices.com)|52.84.12.79|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 52860924 (50M) [application/x-troff-man]
Saving to: 'logitechmediaserver_8.3.0_all.deb.1'

logitechmediaserver_8.3.0_a 100%[===========================================>]  50.41M  10.7MB/s    in 12s

2023-02-17 14:41:03 (4.22 MB/s) - 'logitechmediaserver_8.3.0_all.deb.1' saved [52860924/52860924]
volumio@volumiorpi:~$ sudo dpkg -i logitechmediaserver_8.3.0_all.deb

We trust you have received the usual lecture from the local System
Administrator. It usually boils down to these three things:

    #1) Respect the privacy of others.
    #2) Think before you type.
    #3) With great power comes great responsibility.

[sudo] password for volumio:
Selecting previously unselected package logitechmediaserver.
(Reading database ... 34537 files and directories currently installed.)
Preparing to unpack logitechmediaserver_8.3.0_all.deb ...
Unpacking logitechmediaserver (8.3.0) ...
dpkg: dependency problems prevent configuration of logitechmediaserver:
 logitechmediaserver depends on libcrypt-openssl-rsa-perl; however:
  Package libcrypt-openssl-rsa-perl is not installed.

dpkg: error processing package logitechmediaserver (--install):
 dependency problems - leaving unconfigured
Processing triggers for systemd (241-7~deb10u8+rpi1) ...
Errors were encountered while processing:
 logitechmediaserver
volumio@volumiorpi:~$ Selecting previously unselected package logitechmediaserver.
Unpacking logitechmediaserver (8.3.0) ...
dpkg: dependency problems prevent configuration of logitechmediaserver:
 logitechmediaserver depends on libcrypt-openssl-rsa-perl; however:
  Package libcrypt-openssl-rsa-perl is not installed.

dpkg: error processing package logitechmediaserver (--install):
 dependency problems - leaving unconfigured
Processing triggers for systemd (241-7~deb10u8+rpi1) ...
Errors were encountered while processing:
 logitechmediaserver
volumio@volumiorpi:~$
-bash: Selecting: command not found
volumio@volumiorpi:~$ (Reading database ... 34537 files and directories currently installed.)
-bash: Reading: command not found
volumio@volumiorpi:~$ Preparing to unpack logitechmediaserver_8.3.0_all.deb ...
-bash: Preparing: command not found
volumio@volumiorpi:~$ Unpacking logitechmediaserver (8.3.0) ...
-bash: syntax error near unexpected token `('
volumio@volumiorpi:~$ dpkg: dependency problems prevent configuration of logitechmediaserver:
-bash: dpkg:: command not found
volumio@volumiorpi:~$  logitechmediaserver depends on libcrypt-openssl-rsa-perl; however:
-bash: logitechmediaserver: command not found
-bash: however:: command not found
volumio@volumiorpi:~$   Package libcrypt-openssl-rsa-perl is not installed.
-bash: Package: command not found
volumio@volumiorpi:~$
volumio@volumiorpi:~$ dpkg: error processing package logitechmediaserver (--install):
-bash: syntax error near unexpected token `('
volumio@volumiorpi:~$  dependency problems - leaving unconfigured
-bash: dependency: command not found
volumio@volumiorpi:~$ Processing triggers for systemd (241-7~deb10u8+rpi1) ...
-bash: syntax error near unexpected token `('
volumio@volumiorpi:~$ Errors were encountered while processing:
-bash: Errors: command not found
volumio@volumiorpi:~$  logitechmediaserver
-bash: logitechmediaserver: command not found
volumio@volumiorpi:~$ volumio@volumiorpi:~$
-bash: volumio@volumiorpi:~$: command not found
volumio@volumiorpi:~$

Please advise

Please check if your date time settings are correct.
Seems your system date/time are off.

sudo dpkg-reconfigure tzdata

Factory reset.
Upgraded to:
image

volumio@volumiohpdev:~$ sudo dpkg-reconfigure tzdata

We trust you have received the usual lecture from the local System
Administrator. It usually boils down to these three things:

    #1) Respect the privacy of others.
    #2) Think before you type.
    #3) With great power comes great responsibility.

[sudo] password for volumio:

Current default time zone: 'Europe/Amsterdam'
Local time is now:      Fri Feb 17 14:45:25 CET 2023.
Universal Time is now:  Fri Feb 17 13:45:25 UTC 2023.

volumio@volumiohpdev:~$ sudo apt-get update
Get:1 http://deb.debian.org/debian buster InRelease [122 kB]
Get:2 https://deb.nodesource.com/node_14.x buster InRelease [4584 B]
Get:3 http://deb.debian.org/debian buster/main i386 Packages [7866 kB]
Get:4 https://deb.nodesource.com/node_14.x buster/main amd64 Packages [776 B]
Get:5 http://deb.debian.org/debian buster/main amd64 Packages [7909 kB]
Get:6 http://deb.debian.org/debian buster/main Translation-en [5969 kB]
Get:7 http://deb.debian.org/debian buster/contrib amd64 Packages [50.1 kB]
Get:8 http://deb.debian.org/debian buster/contrib i386 Packages [46.0 kB]
Get:9 http://deb.debian.org/debian buster/contrib Translation-en [44.2 kB]
Get:10 http://deb.debian.org/debian buster/non-free amd64 Packages [87.8 kB]
Get:11 http://deb.debian.org/debian buster/non-free i386 Packages [76.3 kB]
Get:12 http://deb.debian.org/debian buster/non-free Translation-en [88.9 kB]
Fetched 22.3 MB in 3s (6882 kB/s)
Reading package lists... Done
volumio@volumiohpdev:~$

volumio@volumiohpdev:~$ sudo apt-get install libcrypt-openssl-rsa-perl
Reading package lists... Done
Building dependency tree
Reading state information... Done
The following additional packages will be installed:
  libcrypt-openssl-bignum-perl libcrypt-openssl-random-perl
The following NEW packages will be installed:
  libcrypt-openssl-bignum-perl libcrypt-openssl-random-perl
  libcrypt-openssl-rsa-perl
0 upgraded, 3 newly installed, 0 to remove and 1 not upgraded.
Need to get 63.1 kB of archives.
After this operation, 232 kB of additional disk space will be used.
Do you want to continue? [Y/n] y
Get:1 http://deb.debian.org/debian buster/main amd64 libcrypt-openssl-bignum-perl amd64 0.09-1+b1 [25.9 kB]
Get:2 http://deb.debian.org/debian buster/main amd64 libcrypt-openssl-random-perl amd64 0.15-1+b1 [11.2 kB]
Get:3 http://deb.debian.org/debian buster/main amd64 libcrypt-openssl-rsa-perl amd64 0.31-1+b1 [26.1 kB]
Fetched 63.1 kB in 0s (583 kB/s)
debconf: delaying package configuration, since apt-utils is not installed
Selecting previously unselected package libcrypt-openssl-bignum-perl.
(Reading database ... 45021 files and directories currently installed.)
Preparing to unpack .../libcrypt-openssl-bignum-perl_0.09-1+b1_amd64.deb ...
Unpacking libcrypt-openssl-bignum-perl (0.09-1+b1) ...
Selecting previously unselected package libcrypt-openssl-random-perl.
Preparing to unpack .../libcrypt-openssl-random-perl_0.15-1+b1_amd64.deb ...
Unpacking libcrypt-openssl-random-perl (0.15-1+b1) ...
Selecting previously unselected package libcrypt-openssl-rsa-perl.
Preparing to unpack .../libcrypt-openssl-rsa-perl_0.31-1+b1_amd64.deb ...
Unpacking libcrypt-openssl-rsa-perl (0.31-1+b1) ...
Setting up libcrypt-openssl-bignum-perl (0.09-1+b1) ...
Setting up libcrypt-openssl-random-perl (0.15-1+b1) ...
Setting up libcrypt-openssl-rsa-perl (0.31-1+b1) ...
Processing triggers for man-db (2.8.5-2) ...
volumio@volumiohpdev:~$

volumio@volumiohpdev:~$ wget https://downloads.slimdevices.com/LogitechMediaServer_v8.3.0/logitechmediaserver_8.3.0_all.deb
--2023-02-17 14:46:31--  https://downloads.slimdevices.com/LogitechMediaServer_v8.3.0/logitechmediaserver_8.3.0_all.deb
Resolving downloads.slimdevices.com (downloads.slimdevices.com)... 65.9.86.30, 65.9.86.15, 65.9.86.67, ...
Connecting to downloads.slimdevices.com (downloads.slimdevices.com)|65.9.86.30|:443... connected.
HTTP request sent, awaiting response... 200 OK
Length: 52860924 (50M) [application/x-troff-man]
Saving to: 'logitechmediaserver_8.3.0_all.deb'

logitechmediaserver 100%[===================>]  50.41M  40.6MB/s    in 1.2s

2023-02-17 14:46:33 (40.6 MB/s) - 'logitechmediaserver_8.3.0_all.deb' saved [52860924/52860924]

volumio@volumiohpdev:~$ sudo dpkg -i logitechmediaserver_8.3.0_all.deb
Selecting previously unselected package logitechmediaserver.
(Reading database ... 45061 files and directories currently installed.)
Preparing to unpack logitechmediaserver_8.3.0_all.deb ...
Unpacking logitechmediaserver (8.3.0) ...
Setting up logitechmediaserver (8.3.0) ...
Adding system user `squeezeboxserver' (UID 118) ...
Adding new user `squeezeboxserver' (UID 118) with group `nogroup' ...
Not creating home directory `/usr/share/squeezeboxserver'.
Created symlink /etc/systemd/system/multi-user.target.wants/logitechmediaserver.service → /lib/systemd/system/logitechmediaserver.service.
Processing triggers for systemd (241-7~deb10u8) ...

$ sudo apt-get install libcrypt-openssl-rsa-perl wget
Reading package lists… Done
Building dependency tree
Reading state information… Done
Package libcrypt-openssl-rsa-perl is not available, but is referred to by another package.
This may mean that the package is missing, has been obsoleted, or
is only available from another source

E: Package ‘libcrypt-openssl-rsa-perl’ has no installation candidate

Did you follow the steps from the first post?

1 Like

its nowt getting installed.
getting error.
Downloading plugin at https://plugins.volumio.workers.dev/pluginsv2/downloadLatest/lmsde/volumio/buster/armhf
END DOWNLOAD: https://plugins.volumio.workers.dev/pluginsv2/downloadLatest/lmsde/volumio/buster/armhf
Creating install location
Unpacking plugin
Checking that the plugin is suitable for this version of Volumio The plugin can be used with this version of Volumio
Checking for duplicate plugin
Copying plugin to location
Installing necessary utilities
Installing Docker…
Hit:1 Index of /node_14.x/ buster InRelease
Get:2 Index of /debian buster InRelease [32.6 kB]
Get:3 Index of /raspbian buster InRelease [15.0 kB]
Get:4 Index of /debian buster/main armhf Packages [392 kB]
Get:5 Index of /raspbian buster/main armhf Packages [13.0 MB]
Fetched 13.5 MB in 29s (469 kB/s)
Reading package lists…
Reading package lists…
Building dependency tree…
Reading state information…
ca-certificates is already the newest version (20200601~deb10u2).
gnupg is already the newest version (2.2.12-1+rpi1+deb10u1).
lsb-release is already the newest version (10.2019051400+rpi1).
curl is already the newest version (7.74.0-1.2~bpo10+1).
You might want to run ‘apt --fix-broken install’ to correct these.
The following packages have unmet dependencies:
logitechmediaserver : Depends: libcrypt-openssl-rsa-perl but it is not going to be installed
An error occurred in install_docker.sh: line 10: apt-get install -y ca-certificates curl gnupg lsb-release
Installation cannot proceed.
An error occurred while installing the plugin Error

Again, follow the instructions I gave.
Nowhere I have mention to start installing any LMS plugin.

I tried but getting following error message always:
login as: volumio
volumio@192.168.1.2’s password:
___
/_ \ __
__ __ //\ \ __ __ ___ ___ /_\ ___
/\ /\ \ / __\\ \ \ /\ \/\ \ /' __ __\/\ \ / __
\ \ _/ |/\ \L\ \
\ _\ \ _\ /\ /\ /\ \ \ /\ \L\
\ _
/ \ _//_\ _/\ _\ _\ _\ _\ _/
// // // // /////////___/

         Free Audiophile Linux Music Player - Version 3.0

      © 2015-2021 Michelangelo Guarise - Volumio Team - Volumio.org

Volumio Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Welcome to Volumio for Raspberry Pi (5.10.92-v7+ armv7l)
volumio@volumiousbbridge:~$ sudo dpkg-reconfigure tzdata

We trust you have received the usual lecture from the local System
Administrator. It usually boils down to these three things:

#1) Respect the privacy of others.
#2) Think before you type.
#3) With great power comes great responsibility.

[sudo] password for volumio:

Current default time zone: ‘Europe/Amsterdam’
Local time is now: Sun Feb 19 14:35:28 CET 2023.
Universal Time is now: Sun Feb 19 13:35:28 UTC 2023.

volumio@volumiousbbridge:~$ sudo dpkg -i logitechmediaserver_8.3.0_all.deb
dpkg: error: cannot access archive ‘logitechmediaserver_8.3.0_all.deb’: No such file or directory
volumio@volumiousbbridge:~$ sudo apt-get update
Get:1 Index of /debian buster InRelease [32.6 kB]
Get:2 Index of /raspbian buster InRelease [15.0 kB]
Get:3 Index of /node_14.x/ buster InRelease [4584 B]
Get:4 Index of /raspbian buster/main armhf Packages [13.0 MB]
Get:5 Index of /debian buster/main armhf Packages [392 kB]
Get:6 Index of /node_14.x/ buster/main armhf Packages [786 B]
Get:7 Index of /raspbian buster/contrib armhf Packages [58 .8 kB]
Get:8 Index of /raspbian buster/non-free armhf Packages [1 04 kB]
Get:9 Index of /raspbian buster/rpi armhf Packages [1360 B ]
Fetched 13.6 MB in 25s (542 kB/s)
Reading package lists… Done
volumio@volumiousbbridge:~$ sudo apt-get install libcrypt-openssl-rsa-perl
Reading package lists… Done
Building dependency tree
Reading state information… Done
The following additional packages will be installed:
libcrypt-openssl-bignum-perl libcrypt-openssl-random-perl
The following NEW packages will be installed:
libcrypt-openssl-bignum-perl libcrypt-openssl-random-perl libcrypt-openssl-rsa-perl
0 upgraded, 3 newly installed, 0 to remove and 17 not upgraded.
Need to get 59.0 kB of archives.
After this operation, 212 kB of additional disk space will be used.
Do you want to continue? [Y/n] y
Err:1 http://raspbian.mirror.net.in/raspbian/raspbian buster/main armhf libcrypt-openssl-bignum-perl armhf 0.09-1+b1
Connection failed [IP: 103.195.68.3 80]
Err:2 http://raspbian.mirror.net.in/raspbian/raspbian buster/main armhf libcrypt-openssl-random-perl armhf 0.15-1+b1
Connection failed [IP: 103.195.68.3 80]
Err:3 http://raspbian.mirror.net.in/raspbian/raspbian buster/main armhf libcrypt-openssl-rsa-perl armhf 0.31-1+b1
Connection failed [IP: 103.195.68.3 80]
E: Failed to fetch http://raspbian.mirror.net.in/raspbian/raspbian/pool/main/libc/libcrypt-openssl-bignum-perl/libcrypt-openssl-bignum-perl_0.09-1+b1_armhf.deb Connection failed [IP: 103.195.68.3 80]
E: Failed to fetch http://raspbian.mirror.net.in/raspbian/raspbian/pool/main/libc/libcrypt-openssl-random-perl/libcrypt-openssl-random-perl_0.15-1+b1_armhf.deb Connection failed [IP: 103.195.68.3 80]
E: Failed to fetch http://raspbian.mirror.net.in/raspbian/raspbian/pool/main/libc/libcrypt-openssl-rsa-perl/libcrypt-openssl-rsa-perl_0.31-1+b1_armhf.deb Connection failed [IP: 103.195.68.3 80]
E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?
volumio@volumiousbbridge:~$ sudo apt-get install libcrypt-openssl-rsa-perl
Reading package lists… Done
Building dependency tree
Reading state information… Done
The following additional packages will be installed:
libcrypt-openssl-bignum-perl libcrypt-openssl-random-perl
The following NEW packages will be installed:
libcrypt-openssl-bignum-perl libcrypt-openssl-random-perl libcrypt-openssl-rsa-perl
0 upgraded, 3 newly installed, 0 to remove and 17 not upgraded.
Need to get 59.0 kB of archives.
After this operation, 212 kB of additional disk space will be used.
Do you want to continue? [Y/n] Y
Err:1 http://raspbian.mirror.net.in/raspbian/raspbian buster/main armhf libcrypt-openssl-bignum-perl armhf 0.09-1+b1
Connection failed [IP: 103.195.68.3 80]
Err:2 http://raspbian.mirror.net.in/raspbian/raspbian buster/main armhf libcrypt-openssl-random-perl armhf 0.15-1+b1
Connection failed [IP: 103.195.68.3 80]
Err:3 http://raspbian.mirror.net.in/raspbian/raspbian buster/main armhf libcrypt-openssl-rsa-perl armhf 0.31-1+b1
Connection failed [IP: 103.195.68.3 80]
E: Failed to fetch http://raspbian.mirror.net.in/raspbian/raspbian/pool/main/libc/libcrypt-openssl-bignum-perl/libcrypt-openssl-bignum-perl_0.09-1+b1_armhf.deb Connection failed [IP: 103.195.68.3 80]
E: Failed to fetch http://raspbian.mirror.net.in/raspbian/raspbian/pool/main/libc/libcrypt-openssl-random-perl/libcrypt-openssl-random-perl_0.15-1+b1_armhf.deb Connection failed [IP: 103.195.68.3 80]
E: Failed to fetch http://raspbian.mirror.net.in/raspbian/raspbian/pool/main/libc/libcrypt-openssl-rsa-perl/libcrypt-openssl-rsa-perl_0.31-1+b1_armhf.deb Connection failed [IP: 103.195.68.3 80]
E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?
volumio@volumiousbbridge:~$

1 Like

You have performed a factory reset?

what is the output of the below command and is it the correct time date stamp?
date

what is the output of:
sudo apt-get update

Yes performed Factory Reset.
the out put of sudo apt-get update is given below:
login as: volumio
volumio@192.168.1.2’s password:
___
/_ \ __
__ __ //\ \ __ __ ___ ___ /_\ ___
/\ /\ \ / __\\ \ \ /\ \/\ \ /' __ __\/\ \ / __
\ \ _/ |/\ \L\ \
\ _\ \ _\ /\ /\ /\ \ \ /\ \L\
\ _
/ \ _//_\ _/\ _\ _\ _\ _\ _/
// // // // /////////___/

         Free Audiophile Linux Music Player - Version 3.0

      © 2015-2021 Michelangelo Guarise - Volumio Team - Volumio.org

Volumio Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Welcome to Volumio for Raspberry Pi (5.10.92-v7+ armv7l)
Last login: Sun Feb 19 14:34:50 2023 from 192.168.1.44
volumio@volumiousbbridge:~$ sudo apt-get update
Hit:1 Index of /raspbian buster InRelease
Hit:2 Index of /debian buster InRelease
Hit:3 Index of /node_14.x/ buster InRelease
Reading package lists… Done
volumio@volumiousbbridge:~$

Welcome to Volumio for Raspberry Pi (5.10.92-v7+ armv7l)
Last login: Sun Feb 19 14:34:50 2023 from 192.168.1.44
volumio@volumiousbbridge:~$ sudo apt-get update
Hit:1 Index of /raspbian buster InRelease
Hit:2 Index of /debian buster InRelease
Hit:3 Index of /node_14.x/ buster InRelease
Reading package lists… Done
volumio@volumiousbbridge:~$ sudo apt-get install libcrypt-openssl-rsa-perl
Reading package lists… Done
Building dependency tree
Reading state information… Done
The following additional packages will be installed:
libcrypt-openssl-bignum-perl libcrypt-openssl-random-perl
The following NEW packages will be installed:
libcrypt-openssl-bignum-perl libcrypt-openssl-random-perl
libcrypt-openssl-rsa-perl
0 upgraded, 3 newly installed, 0 to remove and 17 not upgraded.
Need to get 59.0 kB of archives.
After this operation, 212 kB of additional disk space will be used.
Do you want to continue? [Y/n] Y
Err:1 http://raspbian.mirror.net.in/raspbian/raspbian buster/main armhf libcrypt-openssl-bignum-perl armhf 0.09-1+b1
Connection failed [IP: 103.195.68.3 80]
Err:2 http://raspbian.mirror.net.in/raspbian/raspbian buster/main armhf libcrypt-openssl-random-perl armhf 0.15-1+b1
Connection failed [IP: 103.195.68.3 80]
Err:3 http://raspbian.mirror.net.in/raspbian/raspbian buster/main armhf libcrypt-openssl-rsa-perl armhf 0.31-1+b1
Connection failed [IP: 103.195.68.3 80]
E: Failed to fetch http://raspbian.mirror.net.in/raspbian/raspbian/pool/main/libc/libcrypt-openssl-bignum-perl/libcrypt-openssl-bignum-perl_0.09-1+b1_armhf.deb Connection failed [IP: 103.195.68.3 80]
E: Failed to fetch http://raspbian.mirror.net.in/raspbian/raspbian/pool/main/libc/libcrypt-openssl-random-perl/libcrypt-openssl-random-perl_0.15-1+b1_armhf.deb Connection failed [IP: 103.195.68.3 80]
E: Failed to fetch http://raspbian.mirror.net.in/raspbian/raspbian/pool/main/libc/libcrypt-openssl-rsa-perl/libcrypt-openssl-rsa-perl_0.31-1+b1_armhf.deb Connection failed [IP: 103.195.68.3 80]
E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?
volumio@volumiousbbridge:~$ ^C
volumio@volumiousbbridge:~$

Where are you located?
Seems you have some network problems, as all 3 packages are available on the given URL.

Please modify your network settings and set a fixed DNS:
8.8.8.8
8.8.4.4

Iam Located in India

So why did you set the date to Europe/Amsterdam? You should select your local time zone.
I guess it’s 4,5 hours later over there

I tried the time zone here and was not working so tried changing time zone to Europe

So do the following:

  • Set the customize DNS
  • Set the correct timezone