Install wl Broadcom module Volumio x86 5.10.165-volumio?
I have a Broadcom Wireless (BCM4360 14e4:43a0) that seems to only be supported by the wl kernel module, but not sure how to go about getting it installed. According to Debian website I need both linux image and header. volumio kernelsource isn’t supported on x86. I found the image for 5.10.165 on GitHub (difficult to find as has been replaced by 5.10.170) but not sure where I can get headers so that the kernel module wl can be compiled. Thanks.
System: Host: minivolumio Kernel: 5.10.165-volumio x86_64 bits: 64 compiler: N/A Console: tty 0 dm: N/A
Distro: Debian GNU/Linux 10 (buster)
Machine: Type: Laptop System: Apple product: Macmini7,1 v: 1.0 serial: <filter> Chassis: type: 10 v: Mac-35C5E08120C7EEAF
serial: <filter>
Mobo: Apple model: Mac-35C5E08120C7EEAF v: Macmini7,1 serial: <filter> UEFI: Apple v: 244.0.0.0.0 date: 06/14/2019
CPU: Topology: Dual Core model: Intel Core i5-4260U bits: 64 type: MT MCP arch: Haswell rev: 1 L2 cache: 3072 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 16000
Speed: 1401 MHz min/max: 800/2700 MHz Core speeds (MHz): 1: 1400 2: 1400 3: 1403 4: 1400
Graphics: Device-1: Intel Haswell-ULT Integrated Graphics vendor: Apple driver: i915 v: kernel bus ID: 00:02.0
chip ID: 8086:0a26
Display: tty server: X.org 1.20.4 driver: modesetting unloaded: fbdev,vesa tty: 134x27
Message: Unable to show advanced data. Required tool glxinfo missing.
Audio: Device-1: Intel Haswell-ULT HD Audio vendor: Apple driver: snd_hda_intel v: kernel bus ID: 00:03.0
chip ID: 8086:0a0c
Device-2: Intel 8 Series HD Audio driver: snd_hda_intel v: kernel bus ID: 00:1b.0 chip ID: 8086:9c20
Device-3: Texas Instruments PCM2704 16-bit stereo audio DAC type: USB driver: hid-generic,snd-usb-audio,usbhid
bus ID: 1-8:6 chip ID: 08bb:2704
Sound Server: ALSA v: k5.10.165-volumio
Network: Device-1: Broadcom Limited BCM4360 802.11ac Wireless Network Adapter vendor: Apple driver: N/A port: efa0
bus ID: 02:00.0 chip ID: 14e4:43a0
Device-2: Broadcom Limited NetXtreme BCM57766 Gigabit Ethernet PCIe driver: tg3 v: kernel port: efa0
bus ID: 03:00.0 chip ID: 14e4:1686
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Drives: Local Storage: total: 465.76 GiB used: 388.45 GiB (83.4%)
ID-1: /dev/sda vendor: Apple model: HDD HTS545050A7E362 size: 465.76 GiB speed: 3.0 Gb/s rotation: 5400 rpm
serial: <filter> rev: B990 scheme: GPT
Partition: ID-1: / size: 453.90 GiB used: 387.55 GiB (85.4%) fs: overlay source: ERR-102
ID-2: /boot size: 168.4 MiB used: 71.0 MiB (42.2%) fs: vfat dev: /dev/sda1
Sensors: Missing: Required tool sensors not installed. Check --recommends
Info: Processes: 156 Uptime: 6m Memory: 3.73 GiB used: 504.7 MiB (13.2%) Init: systemd v: 241 runlevel: 5 default: 2
Compilers: gcc: 8.3.0 alt: 8 Shell: bash v: 5.0.3 running in: tty 0 (SSH) inxi: 3.0.32