Hi all!
I’m trying to use a wifi dongle (Tp-Link T2U) on a raspi 3b+ (I have some instability issues due (I think) to the -not totally close- metal case). In the compatibility list we can read that it (Tp-Link T2U) works out of the box. It’s wrong for me: No led blinking… No led at all
. I’m on the latest version of Volumio.
Here is what I get with ifconfig:
[code]eth0 Link encap:Ethernet HWaddr b8:27:eb:a2:df:b0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:43092 errors:0 dropped:0 overruns:0 frame:0
TX packets:43092 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:4962306 (4.7 MiB) TX bytes:4962306 (4.7 MiB)
wlan0 Link encap:Ethernet HWaddr b8:27:eb:f7:8a:e5
inet addr:192.168.8.103 Bcast:192.168.8.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3349 errors:0 dropped:0 overruns:0 frame:0
TX packets:3357 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1343339 (1.2 MiB) TX bytes:523203 (510.9 KiB)[/code]
lsusb:
Bus 001 Device 004: ID 152d:1561 JMicron Technology Corp. / JMicron USA Technology Corp.
Bus 001 Device 005: ID 2357:011f
Bus 001 Device 006: ID 0424:7800 Standard Microsystems Corp.
Bus 001 Device 003: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 002: ID 0424:2514 Standard Microsystems Corp. USB 2.0 Hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
So it is recognized (Device 005).
I wanted to follow the installation tutorial provided by tp-link on their website https://static.tp-link.com/2018/201812/20181207/Installation%20Guide%20for%20Linux.pdf but at reboot the “8192eu.ko” driver no longer appeared in lsmod. After some researches I’m not sure that I have to load any driver…
Could someone help me?