Web UI connection problems

Help and Support Help
1

Hello again, I connected my Raspberry Pi running Volumio to my home router and restarted it.
The problem is, when I turn it back on, the green activity LED keeps flashing at a fast speed for about 5 minutes before it stops. Yes, it is connected to my router and when I try to access it (the webUI) from it’s IP (10.7.1.10) it just times out.

Note that the Volumio-something wifi network does not appear.

2

connect a monitor to the rPi so you can see what is happening, and mention which rPi you have

3

I have a Pi4B with 2GB of RAM. With the monitor plugged in, I just see the login screen. After I log in, it just works as usual. I see the Volumio 3D ascii logo and the usual stuff

4

Is this a fresh install?
With wat software did you flash the SD?

1 Like
5

I used rpi-imager, the latest version of Volumio OS listed in the imager. And, yes my SD card is fully functional

1 Like
6

please download the latest version from here.
Flash it to the SD card again, seems something went wrong with the previous flash. As there is no need to login at the the terminal.

7

Okay, I’ll try it and report back.

8

@Wheaten So during the first boot, should I join the WiFi network it broadcasts?

9

on first boot, you can enter the credentials of you WiFI network. Complete the installation and reboot. You can access Volumio by it’s given ip or via http://<devicename>.local

10

It is doing that blinking thing again… I can’t send video attachemente yet…

11

Okay, I completed the first time setup. Should I reboot?

1 Like
12

Yes.

But volumio booted up, you did complete the setup?
You can install the Volumio app on your phone and connect to it and check the network settings.
Please post a log:

13

Okay, I’m rebooting.

I see one thing on boot: FREESIZE is: 0.38 and then the volumio logo and the login screen after that.
The volumio appt does not detect it.

I can’t send anymore replies, I will try it
When plugging in ethernet, it works. I will try and figure out how to use wifi though

14

Please connect a wired network cable to the rPi It seems the WiFI setup failed.
You can also try to connect your phone to the volumio hotspot (Volumioxxxx) and check.