I’m going crazy!
I can see something on the display, now just turn it 180 degrees.
You don’t have to run the installer from Waveshare, just add the two lines mentioned by @Wheaten as he explained
please have a look here
Now I just have to get it working with Volumio and NowPlaing and PeppyMeter Screensaver
What do I have to consider?
next problem,
the display only shows the Volumio login screen, no plugin works
install the touch display plugin
For peppy read this topic.
A post was merged into an existing topic: Project with PeppyMeter Screensaver Plugin for VOLUMIO v2.9xx and 3.0xx buster
please post peppy in the appropriate topic. I already move your previous posting.
This topic is not about Peppy
Not just about Peppy,
nothing is shown on the display, neither a screensaver nor Now playing etc
Only the Volumio login screen
Same comment as I placed in Peppy topic.
Please spend some time reading the topics, so you know what your doing.
Please don’t expect me spending a lot of time, because people don’t spend time reading.
Thanks everyone as I now have it working.
My long term aim is to attach my pi 4 to a Waveshare 7.9dsi and feed this into my RME ADI-2 DAC.
I’ following the install instructions on Waveshare’s site but when I run the command: sudo bash ./WSxinchDSI_MAIN.sh 79 I2C0 is says wait for no error messages, but I get the following
What am I doing wrong?
You installed these drivers…
best is to start over as this might cause issues now.
Thank you so much for your help - you’ve been awesome.
After some searching and trial and error I have been able to use the touch screen plugin and changed the orientation to suit.
My next problem is that the screen appears only to one side, as in the photo - is this normal? What have I done wrong and how do I correct it?
The other is that the mouse seems to work in inverse to where I touch - I touch top left, the mouse is bottom right, etc. I’ve done something but I’m not sure what or how to fix it.
1 Like
what is the output of:
cat /boot/userconfig.txt
cat /boot/config.txt
systemctl status -l volumio-kiosk
cat /var/log/Xorg.0.log
xrandr --display :0 --query
**volumio@volumio**:**~**$ cat /boot/userconfig.txt
hdmi_group=2
hdmi_mode=87
hdmi_timings=400 0 100 10 140 1280 10 20 20 2 0 0 0 60 0 43000000 3
hdmi_blanking=1# Add your custom config.txt options to this file, which will be preserved during updates
dtoverlay=vc4-kms-v3d
dtoverlay=vc4-kms-dsi-waveshare-panel,7_9_inch
dtoverlay=WS_xinchDSI_Touch,invertedx,swappedxy**volumio@volumio**:**~**$
**volumio@volumio**:**~**$ cat /boot/config.txt
### DO NOT EDIT THIS FILE ###
### APPLY CUSTOM PARAMETERS TO userconfig.txt ###
initramfs volumio.initrd
include volumioconfig.txt
include userconfig.txt**volumio@volumio**:**~**$
volumio@volumio:~$ systemctl status -l volumio-kiosk
● volumio-kiosk.service - Volumio Kiosk
Loaded: loaded (/lib/systemd/system/volumio-kiosk.service; disabled; vendor p
Active: active (running) since Thu 2024-02-01 21:18:57 GMT; 9min ago
Main PID: 8161 (startx)
Tasks: 78 (limit: 4915)
CGroup: /system.slice/volumio-kiosk.service
├─8161 /bin/sh /usr/bin/startx /etc/X11/Xsession /opt/volumiokiosk.sh
├─8182 xinit /etc/X11/Xsession /opt/volumiokiosk.sh -- /etc/X11/xinit
├─8183 /usr/lib/xorg/Xorg -nolisten tcp :0 -auth /tmp/serverauth.RFa7
├─8193 /bin/bash /opt/volumiokiosk.sh
├─8219 /usr/bin/ssh-agent /opt/volumiokiosk.sh
├─8226 /usr/bin/openbox --startup /usr/lib/arm-linux-gnueabihf/openbo
├─8227 /usr/lib/chromium-browser/chromium-browser-v7 --enable-pinch -
├─8251 /usr/lib/chromium-browser/crashpad_handler --monitor-self --mo
├─8255 /usr/lib/chromium-browser/crashpad_handler --no-periodic-tasks
├─8257 /usr/lib/chromium-browser/chromium-browser-v7 --type=zygote --
├─8258 /usr/lib/chromium-browser/chromium-browser-v7 --type=zygote --
├─8263 /usr/lib/chromium-browser/chromium-browser-v7 --type=zygote --
├─8296 /usr/lib/chromium-browser/chromium-browser-v7 --type=utility -
├─8305 /usr/lib/chromium-browser/chromium-browser-v7 --type=utility -
├─8315 /usr/lib/chromium-browser/chromium-browser-v7 --type=gpu-proce
├─8328 /usr/lib/chromium-browser/chromium-browser-v7 --type=broker
├─8335 /usr/lib/chromium-browser/chromium-browser-v7 --type=renderer
lines 1-23
olumio@volumio:~$ cat /var/log/Xorg.0.log
[ 1520.339]
X.Org X Server 1.20.4
X Protocol Version 11, Revision 0
[ 1520.339] Build Operating System: Linux 5.4.0-109-generic armv8l Raspbian
[ 1520.339] Current Operating System: Linux volumio 6.1.69-v7l+ #1710 SMP Thu Dec 21 13:17:38 GMT 2023 armv7l
[ 1520.339] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_hdmi=0 video=HDMI-A-1:400x1280M@60D smsc95xx.macaddr=D8:3A:DD:99:93:16 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 splash plymouth.ignore-serial-consoles dwc_otg.fiq_enable=1 dwc_otg.fiq_fsm_enable=1 dwc_otg.fiq_fsm_mask=0xF dwc_otg.nak_holdoff=1 quiet console=ttyS0,115200 console=tty1 imgpart=/dev/mmcblk0p2 imgfile=/volumio_current.sqsh rootwait bootdelay=5 elevator=noop logo.nologo vt.global_cursor_default=0 net.ifnames=0 snd-bcm2835.enable_compat_alsa= snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 loglevel=0
[ 1520.339] Build Date: 04 April 2023 07:50:56AM
[ 1520.339] xorg-server 2:1.20.4-1+rpt4+deb10u9 (https://www.debian.org/support)
[ 1520.339] Current version of pixman: 0.36.0
[ 1520.339] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1520.339] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1520.340] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 1 21:18:57 2024
[ 1520.343] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 1520.343] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 1520.343] (==) No Layout section. Using the first Screen section.
[ 1520.343] (==) No screen section available. Using defaults.
[ 1520.343] (**) |-->Screen "Default Screen Section" (0)
[ 1520.343] (**) | |-->Monitor "<default monitor>"
[ 1520.344] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 1520.344] (==) Automatically adding devices
[ 1520.344] (==) Automatically enabling devices
[ 1520.344] (==) Automatically adding GPU devices
[ 1520.344] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 1520.344] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 1520.344] Entry deleted from font path.
[ 1520.344] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 1520.344] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 1520.344] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 1520.344] (II) Loader magic: 0x1fdf80
[ 1520.344] (II) Module ABI versions:
[ 1520.344] X.Org ANSI C Emulation: 0.4
[ 1520.344] X.Org Video Driver: 24.0
[ 1520.344] X.Org XInput driver : 24.1
[ 1520.344] X.Org Server Extension : 10.0
[ 1520.345] (--) using VT number 2
[ 1520.345] (II) systemd-logind: logind integration requires -keeptty and -keeptty was not provided, disabling logind integration
[ 1520.348] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 1520.362] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 1520.363] (II) no primary bus or device found
[ 1520.363] falling back to /sys/devices/platform/gpu/drm/card1
[ 1520.363] (II) LoadModule: "glx"
[ 1520.366] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1520.369] (II) Module glx: vendor="X.Org Foundation"
[ 1520.369] compiled for 1.20.4, module version = 1.0.0
[ 1520.369] ABI class: X.Org Server Extension, version 10.0
[ 1520.369] (==) Matched modesetting as autoconfigured driver 0
[ 1520.369] (==) Matched fbdev as autoconfigured driver 1
[ 1520.369] (==) Assigned the driver to the xf86ConfigLayout
[ 1520.369] (II) LoadModule: "modesetting"
[ 1520.370] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 1520.370] (II) Module modesetting: vendor="X.Org Foundation"
[ 1520.370] compiled for 1.20.4, module version = 1.20.4
[ 1520.370] Module class: X.Org Video Driver
[ 1520.370] ABI class: X.Org Video Driver, version 24.0
[ 1520.370] (II) LoadModule: "fbdev"
[ 1520.370] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 1520.370] (II) Module fbdev: vendor="X.Org Foundation"
[ 1520.370] compiled for 1.20.3, module version = 0.5.0
[ 1520.370] Module class: X.Org Video Driver
[ 1520.370] ABI class: X.Org Video Driver, version 24.0
[ 1520.370] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 1520.370] (II) FBDEV: driver for framebuffer: fbdev
[ 1520.392] (II) modeset(0): using drv /dev/dri/card1
[ 1520.392] (WW) Falling back to old probe method for fbdev
[ 1520.392] (II) Loading sub module "fbdevhw"
[ 1520.392] (II) LoadModule: "fbdevhw"
[ 1520.393] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 1520.393] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 1520.393] compiled for 1.20.4, module version = 0.0.2
[ 1520.393] ABI class: X.Org Video Driver, version 24.0
[ 1520.394] (II) modeset(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 1520.394] (==) modeset(0): Depth 24, (==) framebuffer bpp 32
[ 1520.394] (==) modeset(0): RGB weight 888
[ 1520.394] (==) modeset(0): Default visual is TrueColor
[ 1520.394] (II) Loading sub module "glamoregl"
[ 1520.394] (II) LoadModule: "glamoregl"
[ 1520.394] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 1520.405] (II) Module glamoregl: vendor="X.Org Foundation"
[ 1520.405] compiled for 1.20.4, module version = 1.0.1
[ 1520.405] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1520.911] (II) modeset(0): glamor X acceleration enabled on V3D 4.2
[ 1520.911] (II) modeset(0): glamor initialized
[ 1520.912] (II) modeset(0): Output HDMI-1 has no monitor section
[ 1520.912] (II) modeset(0): Output HDMI-2 has no monitor section
[ 1520.913] (II) modeset(0): Output DSI-1 has no monitor section
[ 1520.938] (II) modeset(0): EDID for output HDMI-1
[ 1520.938] (II) modeset(0): Printing probed modes for output HDMI-1
[ 1520.938] (II) modeset(0): Modeline "400x1280"x60.0 42.03 400 424 464 528 1280 1283 1293 1327 -hsync +vsync (79.6 kHz)
[ 1520.939] (II) modeset(0): EDID for output HDMI-2
[ 1520.939] (II) modeset(0): EDID for output DSI-1
[ 1520.939] (II) modeset(0): Printing probed modes for output DSI-1
[ 1520.939] (II) modeset(0): Modeline "400x1280"x73.7 50.00 400 440 470 510 1280 1300 1310 1330 (98.0 kHz eP)
[ 1520.939] (II) modeset(0): Output HDMI-1 connected
[ 1520.939] (II) modeset(0): Output HDMI-2 disconnected
[ 1520.939] (II) modeset(0): Output DSI-1 connected
[ 1520.939] (II) modeset(0): Using exact sizes for initial modes
[ 1520.939] (II) modeset(0): Output HDMI-1 using initial mode 400x1280 +0+0
[ 1520.939] (II) modeset(0): Output DSI-1 using initial mode 400x1280 +0+0
[ 1520.939] (==) modeset(0): Using gamma correction (1.0, 1.0, 1.0)
[ 1520.939] (==) modeset(0): DPI set to (96, 96)
[ 1520.939] (II) Loading sub module "fb"
[ 1520.939] (II) LoadModule: "fb"
[ 1520.939] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1520.939] (II) Module fb: vendor="X.Org Foundation"
[ 1520.939] compiled for 1.20.4, module version = 1.0.0
[ 1520.940] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1520.940] (II) UnloadModule: "fbdev"
[ 1520.940] (II) Unloading fbdev
[ 1520.940] (II) UnloadSubModule: "fbdevhw"
[ 1520.940] (II) Unloading fbdevhw
[ 1521.007] (==) modeset(0): Backing store enabled
[ 1521.007] (==) modeset(0): Silken mouse enabled
[ 1521.203] (II) modeset(0): Initializing kms color map for depth 24, 8 bpc.
[ 1521.203] (==) modeset(0): DPMS enabled
[ 1521.204] (II) modeset(0): [DRI2] Setup complete
[ 1521.204] (II) modeset(0): [DRI2] DRI driver: vc4
[ 1521.204] (II) modeset(0): [DRI2] VDPAU driver: vc4
[ 1521.204] (II) Initializing extension Generic Event Extension
[ 1521.205] (II) Initializing extension SHAPE
[ 1521.205] (II) Initializing extension MIT-SHM
[ 1521.206] (II) Initializing extension XInputExtension
[ 1521.206] (II) Initializing extension XTEST
[ 1521.207] (II) Initializing extension BIG-REQUESTS
[ 1521.208] (II) Initializing extension SYNC
[ 1521.208] (II) Initializing extension XKEYBOARD
[ 1521.209] (II) Initializing extension XC-MISC
[ 1521.209] (II) Initializing extension SECURITY
[ 1521.210] (II) Initializing extension XFIXES
[ 1521.210] (II) Initializing extension RENDER
[ 1521.211] (II) Initializing extension RANDR
[ 1521.212] (II) Initializing extension COMPOSITE
[ 1521.213] (II) Initializing extension DAMAGE
[ 1521.213] (II) Initializing extension MIT-SCREEN-SAVER
[ 1521.214] (II) Initializing extension DOUBLE-BUFFER
[ 1521.214] (II) Initializing extension RECORD
[ 1521.215] (II) Initializing extension DPMS
[ 1521.215] (II) Initializing extension Present
[ 1521.216] (II) Initializing extension DRI3
[ 1521.216] (II) Initializing extension X-Resource
[ 1521.217] (II) Initializing extension XVideo
[ 1521.218] (II) Initializing extension XVideo-MotionCompensation
[ 1521.218] (II) Initializing extension SELinux
[ 1521.218] (II) SELinux: Disabled on system
[ 1521.218] (II) Initializing extension GLX
[ 1521.550] (II) AIGLX: Loaded and initialized vc4
[ 1521.550] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 1521.551] (II) Initializing extension XFree86-VidModeExtension
[ 1521.551] (II) Initializing extension XFree86-DGA
[ 1521.552] (II) Initializing extension XFree86-DRI
[ 1521.552] (II) Initializing extension DRI2
[ 1521.555] (II) modeset(0): Damage tracking initialized
[ 1521.555] (II) modeset(0): Setting screen physical size to 105 x 338
[ 1521.669] (II) config/udev: Adding input device 10-0014 Goodix Capacitive TouchScreen (/dev/input/event0)
[ 1521.669] (**) 10-0014 Goodix Capacitive TouchScreen: Applying InputClass "libinput keyboard catchall"
[ 1521.669] (**) 10-0014 Goodix Capacitive TouchScreen: Applying InputClass "libinput touchscreen catchall"
[ 1521.669] (**) 10-0014 Goodix Capacitive TouchScreen: Applying InputClass "Touch rotation"
[ 1521.669] (II) LoadModule: "libinput"
[ 1521.670] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.so
[ 1521.680] (II) Module libinput: vendor="X.Org Foundation"
[ 1521.680] compiled for 1.20.3, module version = 0.28.2
[ 1521.680] Module class: X.Org XInput Driver
[ 1521.680] ABI class: X.Org XInput driver, version 24.1
[ 1521.680] (II) Using input driver 'libinput' for '10-0014 Goodix Capacitive TouchScreen'
[ 1521.680] (**) 10-0014 Goodix Capacitive TouchScreen: always reports core events
[ 1521.680] (**) Option "Device" "/dev/input/event0"
[ 1521.680] (**) Option "_source" "server/udev"
[ 1521.690] (II) event0 - 10-0014 Goodix Capacitive TouchScreen: is tagged by udev as: Keyboard Touchscreen
[ 1521.692] (II) event0 - 10-0014 Goodix Capacitive TouchScreen: device is a keyboard
[ 1521.692] (II) event0 - 10-0014 Goodix Capacitive TouchScreen: device is a touch device
[ 1521.692] (II) event0 - 10-0014 Goodix Capacitive TouchScreen: device removed
[ 1521.741] (II) libinput: 10-0014 Goodix Capacitive TouchScreen: needs a virtual subdevice
[ 1521.741] (**) Option "config_info" "udev:/sys/devices/platform/soc/fe205000.i2c/i2c-22/i2c-10/10-0014/input/input0/event0"
[ 1521.741] (II) XINPUT: Adding extended input device "10-0014 Goodix Capacitive TouchScreen" (type: TOUCHSCREEN, id 6)
[ 1521.742] (**) Option "AccelerationScheme" "none"
[ 1521.742] (**) 10-0014 Goodix Capacitive TouchScreen: (accel) selected scheme none/0
[ 1521.742] (**) 10-0014 Goodix Capacitive TouchScreen: (accel) acceleration factor: 2.000
[ 1521.742] (**) 10-0014 Goodix Capacitive TouchScreen: (accel) acceleration threshold: 4
[ 1521.746] (II) event0 - 10-0014 Goodix Capacitive TouchScreen: is tagged by udev as: Keyboard Touchscreen
[ 1521.748] (II) event0 - 10-0014 Goodix Capacitive TouchScreen: device is a keyboard
[ 1521.748] (II) event0 - 10-0014 Goodix Capacitive TouchScreen: device is a touch device
[ 1521.750] (II) config/udev: Adding input device 10-0014 Goodix Capacitive TouchScreen (/dev/input/mouse0)
[ 1521.750] (II) No input driver specified, ignoring this device.
[ 1521.750] (II) This device may have been added with another device file.
[ 1521.751] (II) config/udev: Adding input device vc4-hdmi-0 (/dev/input/event1)
[ 1521.751] (**) vc4-hdmi-0: Applying InputClass "libinput keyboard catchall"
[ 1521.751] (II) Using input driver 'libinput' for 'vc4-hdmi-0'
[ 1521.751] (**) vc4-hdmi-0: always reports core events
[ 1521.751] (**) Option "Device" "/dev/input/event1"
[ 1521.751] (**) Option "_source" "server/udev"
[ 1521.754] (II) event1 - vc4-hdmi-0: is tagged by udev as: Keyboard Pointingstick
[ 1521.755] (II) event1 - vc4-hdmi-0: device is a pointer
[ 1521.755] (II) event1 - vc4-hdmi-0: device is a keyboard
[ 1521.755] (II) event1 - vc4-hdmi-0: device removed
[ 1521.820] (II) libinput: vc4-hdmi-0: needs a virtual subdevice
[ 1521.821] (**) Option "config_info" "udev:/sys/devices/platform/soc/fef00700.hdmi/rc/rc0/input2/event1"
[ 1521.821] (II) XINPUT: Adding extended input device "vc4-hdmi-0" (type: MOUSE, id 7)
[ 1521.821] (**) Option "AccelerationScheme" "none"
[ 1521.821] (**) vc4-hdmi-0: (accel) selected scheme none/0
[ 1521.821] (**) vc4-hdmi-0: (accel) acceleration factor: 2.000
[ 1521.821] (**) vc4-hdmi-0: (accel) acceleration threshold: 4
[ 1521.824] (II) event1 - vc4-hdmi-0: is tagged by udev as: Keyboard Pointingstick
[ 1521.825] (II) event1 - vc4-hdmi-0: device is a pointer
[ 1521.825] (II) event1 - vc4-hdmi-0: device is a keyboard
[ 1521.827] (II) config/udev: Adding input device vc4-hdmi-1 (/dev/input/event2)
[ 1521.827] (**) vc4-hdmi-1: Applying InputClass "libinput keyboard catchall"
[ 1521.827] (II) Using input driver 'libinput' for 'vc4-hdmi-1'
[ 1521.827] (**) vc4-hdmi-1: always reports core events
[ 1521.827] (**) Option "Device" "/dev/input/event2"
[ 1521.827] (**) Option "_source" "server/udev"
[ 1521.829] (II) event2 - vc4-hdmi-1: is tagged by udev as: Keyboard Pointingstick
[ 1521.830] (II) event2 - vc4-hdmi-1: device is a pointer
[ 1521.830] (II) event2 - vc4-hdmi-1: device is a keyboard
[ 1521.831] (II) event2 - vc4-hdmi-1: device removed
[ 1521.880] (II) libinput: vc4-hdmi-1: needs a virtual subdevice
[ 1521.880] (**) Option "config_info" "udev:/sys/devices/platform/soc/fef05700.hdmi/rc/rc1/input3/event2"
[ 1521.880] (II) XINPUT: Adding extended input device "vc4-hdmi-1" (type: MOUSE, id 8)
[ 1521.880] (**) Option "AccelerationScheme" "none"
[ 1521.880] (**) vc4-hdmi-1: (accel) selected scheme none/0
[ 1521.880] (**) vc4-hdmi-1: (accel) acceleration factor: 2.000
[ 1521.880] (**) vc4-hdmi-1: (accel) acceleration threshold: 4
[ 1521.883] (II) event2 - vc4-hdmi-1: is tagged by udev as: Keyboard Pointingstick
[ 1521.884] (II) event2 - vc4-hdmi-1: device is a pointer
[ 1521.884] (II) event2 - vc4-hdmi-1: device is a keyboard
[ 1521.923] (**) 10-0014 Goodix Capacitive TouchScreen: Applying InputClass "libinput keyboard catchall"
[ 1521.923] (**) 10-0014 Goodix Capacitive TouchScreen: Applying InputClass "libinput touchscreen catchall"
[ 1521.923] (**) 10-0014 Goodix Capacitive TouchScreen: Applying InputClass "Touch rotation"
[ 1521.923] (II) Using input driver 'libinput' for '10-0014 Goodix Capacitive TouchScreen'
[ 1521.923] (**) 10-0014 Goodix Capacitive TouchScreen: always reports core events
[ 1521.923] (**) Option "Device" "/dev/input/event0"
[ 1521.923] (**) Option "_source" "_driver/libinput"
[ 1521.923] (II) libinput: 10-0014 Goodix Capacitive TouchScreen: is a virtual subdevice
[ 1521.923] (**) Option "config_info" "udev:/sys/devices/platform/soc/fe205000.i2c/i2c-22/i2c-10/10-0014/input/input0/event0"
[ 1521.923] (II) XINPUT: Adding extended input device "10-0014 Goodix Capacitive TouchScreen" (type: KEYBOARD, id 9)
[ 1521.923] (**) Option "xkb_model" "pc105"
[ 1521.923] (**) Option "xkb_layout" "us"
[ 1521.923] (**) vc4-hdmi-0: Applying InputClass "libinput keyboard catchall"
[ 1521.923] (II) Using input driver 'libinput' for 'vc4-hdmi-0'
[ 1521.923] (**) vc4-hdmi-0: always reports core events
[ 1521.923] (**) Option "Device" "/dev/input/event1"
[ 1521.923] (**) Option "_source" "_driver/libinput"
[ 1521.923] (II) libinput: vc4-hdmi-0: is a virtual subdevice
[ 1521.923] (**) Option "config_info" "udev:/sys/devices/platform/soc/fef00700.hdmi/rc/rc0/input2/event1"
[ 1521.923] (II) XINPUT: Adding extended input device "vc4-hdmi-0" (type: KEYBOARD, id 10)
[ 1521.923] (**) Option "xkb_model" "pc105"
[ 1521.924] (**) Option "xkb_layout" "us"
[ 1521.924] (**) vc4-hdmi-1: Applying InputClass "libinput keyboard catchall"
[ 1521.924] (II) Using input driver 'libinput' for 'vc4-hdmi-1'
[ 1521.924] (**) vc4-hdmi-1: always reports core events
[ 1521.924] (**) Option "Device" "/dev/input/event2"
[ 1521.924] (**) Option "_source" "_driver/libinput"
[ 1521.924] (II) libinput: vc4-hdmi-1: is a virtual subdevice
[ 1521.924] (**) Option "config_info" "udev:/sys/devices/platform/soc/fef05700.hdmi/rc/rc1/input3/event2"
[ 1521.924] (II) XINPUT: Adding extended input device "vc4-hdmi-1" (type: KEYBOARD, id 11)
[ 1521.924] (**) Option "xkb_model" "pc105"
[ 1521.924] (**) Option "xkb_layout" "us"
[ 1522.476] (II) modeset(0): Allocate new frame buffer 1280x1280 stride
[ 1522.564] (II) modeset(0): Disabling kernel dirty updates, not required.
volumio@volumio:~$ xrandr --display :0 --query
Screen 0: minimum 320 x 200, current 1280 x 1280, maximum 7680 x 7680
HDMI-1 connected primary 400x1280+0+0 (normal left inverted right x axis y axis) 0mm x 0mm
400x1280 59.99*
HDMI-2 disconnected (normal left inverted right x axis y axis)
DSI-1 connected 1280x400+0+0 right (normal left inverted right x axis y axis) 0mm x 0mm
400x1280 73.71*+
Itr seems you’ve installed the drivers from waveshare again?
If so you need to factory reset Volumio. Otherwise it will become unstable.
As I see in your userconfig.txt:
dtoverlay=WS_xinchDSI_Touch,invertedx,swappedxy**volumio@volumio**:**~**$
Only add the lines that where given.
dtoverlay=vc4-kms-v3d
dtoverlay=vc4-kms-dsi-waveshare-panel,7_9_inch
Thank you so much. I am still finding it hard to work out how the screen rotates. My searches lead me to the same path I took, meaning I’ll have dtoverlay=WS_xinchDSI_Touch,invertedx,swappedxyvolumio@volumio:~$ in userconfig.txt. again. I have a feeling it is simple but looking through this thread I can’t find exactly what that is.
@Clarkeyboy and others, please check the solution of this post! #76
There @Darmur posted detailed answer that should work in most of the cases:
In short - NO ADDITIONAL DRIVERS ARE NEEDED with new Volumio version!
To rotate your display, touchscreen etc, you should add additional parameters (depending what you want to do) to the line:
dtoverlay=vc4-kms-dsi-waveshare-panel,7_9_inch
Hope it helps!
the screen rotates adding the rotation value after the string provided by @Wheaten
for example
dtoverlay=vc4-kms-v3d
dtoverlay=vc4-kms-dsi-waveshare-panel,7_9_inch,rotation=180
you MUST NOT install the Waveshare drivers, you MUST NOT add the string meant to be used with Waveshare drivers. If you do so, your system will be corrupted by the Waveshare script, not meant to be used with Volumio, and you must start again with a clean image.
Thanks it does.
So, I need to add to userconfig dtoverlay=vc4-kms-dsi-waveshare-panel,7_9_inch ,invx=0,invy=0,swapxy=0
What I don’t get is the figures I need to add to rotate 90 degree right. Would it be invx=1, invy=1, swapxy=1 and trial and error. A previous suggestion of adding rotate=90 didn’t work.
Looking again would it be invx=1, invy=O, swapxy=0 or is it by degrees: invx=90, etc