USBridge with Volumio 2.282 not working

Help and Support Help
1

USBridge with Volumio v. 2.282 should be working, but it won’t with my Sparky. I’m powering it with 3,5A lpsu and J28 jumper disconnected. USBridge is connected to Mytek Brooklyn DAC.

volumio@volumio:~$ lsusb Bus 004 Device 005: ID 25ce:001f Bus 004 Device 004: ID 25ce:801f Bus 004 Device 003: ID 0424:2412 Standard Microsystems Corp. Bus 004 Device 002: ID 0424:2412 Standard Microsystems Corp. Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 002: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

volumio@volumio:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: atm7059link [atm7059_link], device 0: ATC2603C PCM atc2603c-dai-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: atm7059link [atm7059_link], device 1: HDMI PCM atm7059-hdmi-dai-1 [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: atm7059link [atm7059_link], device 2: SPDIF PCM atm7059-spdif-dai-2 [] Subdevices: 1/1 Subdevice #0: subdevice #0

What I’m missing here?

It’s working great if connected directly to Sparky USB port:

volumio@volumio:~$ lsusb Bus 004 Device 004: ID 0424:2412 Standard Microsystems Corp. Bus 004 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 008: ID 25ce:001f Bus 003 Device 003: ID 0424:2412 Standard Microsystems Corp. Bus 003 Device 002: ID 1a40:0101 Terminus Technology Inc. 4-Port HUB Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub

volumio@volumio:~$ aplay -l **** List of PLAYBACK Hardware Devices **** card 0: atm7059link [atm7059_link], device 0: ATC2603C PCM atc2603c-dai-0 [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: atm7059link [atm7059_link], device 1: HDMI PCM atm7059-hdmi-dai-1 [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 0: atm7059link [atm7059_link], device 2: SPDIF PCM atm7059-spdif-dai-2 [] Subdevices: 1/1 Subdevice #0: subdevice #0 card 1: DAC [Brooklyn DAC], device 0: USB Audio [USB Audio] Subdevices: 0/1 Subdevice #0: subdevice #0

2

Did a clean install v2.282, also nothing. Faulty USBridge?

3

We are checking , will get back soon.

4

Thanks! Here is the output after reboot:

volumio@volumio:~$ dmesg | grep high [ 0.000000] Memory: 811152k/811152k available, 237424k reserved, 270336K highmem [ 1.198397] mmc0: new ultra high speed SDR50 SDXC card at address aaaa [ 1.404780] ====otgvbus_gpio: num-78, active-high---detect_type=3,idpin_type=0,vbus_type=2--- [ 4.653556] usb 3-1: not running at top speed; connect to a high speed hub [ 5.033403] usb 3-1.1: not running at top speed; connect to a high speed hub [ 5.613579] usb 3-1.1.2: not running at top speed; connect to a high speed hub [ 11.883173] usb 4-1: new high-speed USB device number 2 using aotg_hcd

volumio@volumio:~$ dmesg | grep full [ 1.126381] ipt_CLUSTERIP: ClusterIP Version 0.8 loaded successfully [ 4.513199] usb 3-1: new full-speed USB device number 2 using aotg_hcd [ 4.933315] usb 3-1.1: new full-speed USB device number 3 using aotg_hcd [ 5.313235] usb 3-1.1.1: new full-speed USB device number 4 using aotg_hcd [ 5.513210] usb 3-1.1.2: new full-speed USB device number 5 using aotg_hcd autoneg -> speed:100, duplex:full, pause: non-supported

volumio@volumio:~$ lsusb -t /: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=aotg_hcd/1p, 480M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M /: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=aotg_hcd/1p, 480M |__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/2p, 12M |__ Port 1: Dev 3, If 0, Class=Hub, Driver=hub/2p, 12M |__ Port 1: Dev 4, If 0, Class=Vendor Specific Class, Driver=, 12M |__ Port 2: Dev 5, If 0, Class=Vendor Specific Class, Driver=, 12M /: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M /: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M

5

After a long trial and error (a year ago) the problem was in Sparky SBC and they replaced it. Great customer service!