Hello, i tried to install Volumio with “TP-Link TL-WN725N” usb wireless card but with no success , i cant see wlan0 if i type ifconfig -a
any chance to install this card?
thanks !
http://blog.pi3g.com/2013/05/tp-link-150mbps-wireless-n-nano-usb-adapter-tl-wn725n-und-raspberry-pi/
there are two versions:
version 1 runs plug and play
version 2 runs if you install the drivers
you can translate the website behind this link above
the drivers for version 2 will be included in the next version
10x! ill try it tomorrow
well i think i got the VERSION 2
any eta for next version of Volumio?
:]
type lsusb to see exactly which card it is.
I’m just doing copy and paste from the link joda suggested and integrating them in a user friendly way:
wget https://dl.dropboxusercontent.com/u/80256631/8188eu-20130209.tar.gz
tar -zxvf 8188eu-20130209.tar.gz
sudo install -p -m 644 8188eu.ko /lib/modules/$(uname -r)/kernel/drivers/net/wireless
echo 8188eu > /etc/modules
This should do the trick if you have the right USB- WLan adapter. If not try another PSU, this might be the issue…
10x but i get “failed:name or service unknown”
what i am doing wrong ?
when i type ifconfig i cant see any ip adress maybe i dont have connection ?
how to check it and resolve ?
i will post a tutorial when im back home
thanks !
update: i edit the interfaces that eth0 now is static
i get ipv4 and i sucesss to enter “volumio.local”
2 problems
-
any apt-get i got “unable to resolve host address” maybe i need to enter dns server in interefaces ??
-
cant mount usb (ntfs) that connected to the rasp
how i do it ?
10x
update 2 :
i configure the dns . now i can resolve network addresses .
tried to install the 8818eu driver with no success .
lsusb :
obda:8179 realtek semi…
still no wlan0
what to do ?
thanks!
there are different versions of the 8188eu driver
you need to install the right one
i will write the tutorial this evening!
refer to raspberrypi.org/forums/viewt … 82#p462982 to see which driver you need. you have to match the kernel.
thanks! ill try it later
Hope this will help you:
http://volumio.org/forum/link-wn725n-version-working-with-volumio-t1572.html
10x ! i setup the wireless card (!) , mount a nas share and i see all my music in the library.
i try to listen them but when i press play nothing happen . i see that the track is load up but not play
the pi connected to my audio setup with the pl output (ordered dac today) .
what to do ?
thanks !
try playing songs from a usb stick.
do you see the songs in the playlist?
try 2 usb , fat32 and ntfs
i see that sda1 attached but i can see it also after mpd update
update :
on menu - playback = i cant see anything in “Audio output” - the list is empty