These skins are just beautiful! Awesome!
I guess you can´t find time to scale some of them down to 800x480? But if you can I would be very happy…
My congratulations to your sons international manager certificate!
Regards // C
1 Like
Which skins? Today I’m in a good mood 
1 Like
Nice to hear!
I really like nr 2 and 3(Leben) on top row
on second row nr 1 and 2
and on third row nr 1
If I have to choose just 2 skins it´s the turntable and Leben skins on first row! 
Best regards// Claes
Unison Res, Helix, Leben
DAgostini,Passe ClasseM,
Audio Res,Jericho, McIntosh tube
Ok…
Helix, Leben, Pass, ClasseM,and Audio Research
But only if you can find time to do it…
Regards /C
Hi Gelo5,
I have always enjoyed your skins in addition to 2aCD’s. It’s been a long way from beginning and now it’s 805 posts in this thread. Until I change my screen to 1920x1080, I will have to ask you again to convert them to 1280x800. Much appreciated!
By the way, congratulations to your son.
2 Likes
Hello All,
First, thanks to all the contributors!
I bought a screen when I saw Andy’s video about Peppy.
My screen is 7 inch 1024*600 touch screen 16:9.
I have never ever used terminal, but I have Read all posts here and there, so I’m almost there… I’ve installed Volumio, Peppy and the updated skins, but I can’t get the screen to match the size. I have entered in terminal (sudo nano userconfig.txt)
hdmi_group=2
hdmi_mode=87
hdmi_cvt=1024 600 60 3 0 0 0
because I read all of your posts and the RPi4 page about userconfig.txt
also downloaded the skins that you gently put it here thinking that was going to resolve my issue, but is the same. The res of the plugin is set to the correct size of my screen and also tryed the other ones but is not good. Please help me! I have been hours and hours trying to resolve it by reading all the content here. I’ll send some pics. Thanks a lot.
hdmi_cvt 1024 600 60 3 0 0 0
WITHOUT “=”
Hi Gelo!
I don´t know how to say Thank You in a way you really deserve. Anyway I must say that you have done a fantastic work with these skins! They are truly beatiful!
Thanks for all your efforts and for sharing! 
Best Regards// Claes
1 Like
Thank you Gelo, didn´t work…
Maybe this helps:
1 Like
Provide a link to this monitor.
Take a picture of what you have in the userconfig.txt file (picture, don’t write)
If it’s a Chinese monitor, try this configuration in userconfig.txt
max_usb_current=1
hdmi_force_hotplug=1
config_hdmi_boost=7
hdmi_group=2
hdmi_mode=87
hdmi_drive=1
display_rotate=0
hdmi_cvt 1024 600 60 6 0 0 0
1 Like
I was on the wrong folder, I just put it into /boot , and I´t worked!
Thanks, @Gelo5 and @bungie240 and all the contributors!
I’ll send a pic of a skin i made based on @Gelo5 Mcintosh, just playing around…!
Thank you so much!
2 Likes
1 Like
2 Likes
Hi Gelo5. I can´t test your skins today. I need to start my Pi4 with a new fresh install. My SD card seems to be currupt. Not fun at all.
Anyway Thank you for your skins. You made my day! I´ll get back to you when I have my Pi up and running!
Best Regards// Claes
Andy - Catch and test (1280x800).
Andy_new_1280.zip (5.7 MB)
1 Like
Good stuff, glad you got it working.
