[PLUGIN] Touch Display

Rue · December 28, 2023, 9:19am

Good morning,
I know other users who use this display. I think the problem is with my display and I will replace it first.
Thank you for your efforts and help

gvolt · December 28, 2023, 9:27am

Could you check if touch works if you establish the USB connection between display and Pi only after the system has booted and the Touch Display plugin has been started?

Rue · December 28, 2023, 10:12am

I tried that too, unfortunately without success. Thanks, the display is going back.

Wheaten · January 22, 2024, 1:06pm

@gvolt ,

Are you able to add a configurable setting to the plugin.
To avoid the white screen while the GUI loads?

open a ssh session and type:
sudo nano /opt/volumiokiosk.sh

find:
--disable-translate \
and add below:
--force-dark-mode \

Just tested it and it does work

Wheaten · January 29, 2024, 7:34am

13 posts were split to a new topic: Date Time issues rPi4

Wheaten · January 29, 2024, 7:35am

Moved the DateTime issues to a new topic, so it can be found by others and avoid messing up this topic.

Franky_Byte · January 31, 2024, 6:56pm

I am in despair
nothing works
And I don’t understand the peppy

fa1
fa2
fa3

Wheaten · January 31, 2024, 7:09pm

Please spend some time reading the topics, as this is already answered.
Please execute via a SSH session:
https://developers.volumio.com/SSH%20Connection

sudo bash -c 'cat << EOF >  /etc/X11/xorg.conf.d/99-vc4.conf
Section "OutputClass"
    Identifier "vc4"
    MatchDriver "vc4"
    Driver "modesetting"
    Option "PrimaryGPU" "true"
EndSection
EOF'

reboot

Franky_Byte · January 31, 2024, 8:38pm

Thank you very much for your patience.
But it still doesn’t work

fa4

fa5

Wheaten · January 31, 2024, 8:50pm

please connect to Volumio via SSH .
Then execute

cat /boot/config.txt

and

cat /boot/userconfig.txt

and post the output.

Franky_Byte · January 31, 2024, 8:55pm

SSH - YES

Wheaten · January 31, 2024, 10:04pm

@gvolt

Can you take a look

gvolt · January 31, 2024, 10:28pm

Did you run “WS_xinchDSI_MAIN.sh” on the current installation?

Please post the output of

cat /boot/config.txt

cat /boot/userconfig.txt

and

cat /var/log/Xorg.0.log

Franky_Byte · January 31, 2024, 11:10pm

I have NOT installed any other drivers…
This error message always appears

gvolt · January 31, 2024, 11:36pm

According to the picture above you currently have version 3.3.6 of the Touch Display plugin installed. Uninstall it and install 3.3.7.

Franky_Byte · January 31, 2024, 11:48pm

I have tried all versions, including a new Volumio image in between

gvolt · February 1, 2024, 7:52am

Execute

systemctl status -l volumio-kiosk

and post the output. Please don’t post screenshots of such command’s output but copy the output from Volumio’s console, paste it into a post and format the pasted content using code tags for better readablity.

Has the Touch Display plugin been installed from the plugin store?

Has the password for root been changed?

Franky_Byte · February 1, 2024, 8:41am

Thank you very much for your help

Plugins loaded from the store
The password has not been changed

volumio-kiosk.service - Volumio Kiosk
   Loaded: loaded (/lib/systemd/system/volumio-kiosk.service; disabled; vendor p
   Active: active (running) since Fri 2024-01-19 18:23:52 CET; 1 weeks 5 days ag
 Main PID: 1033 (startx)
    Tasks: 76 (limit: 1563)
   CGroup: /system.slice/volumio-kiosk.service
           ├─1033 /bin/sh /usr/bin/startx /etc/X11/Xsession /opt/volumiokiosk.sh
           ├─1056 xinit /etc/X11/Xsession /opt/volumiokiosk.sh -- /usr/bin/X :0
           ├─1057 /usr/lib/xorg/Xorg :0 -nocursor -auth /tmp/serverauth.y7Qny0yC
           ├─1138 /bin/bash /opt/volumiokiosk.sh
           ├─1164 /usr/bin/ssh-agent /opt/volumiokiosk.sh
           ├─1171 /usr/bin/openbox --startup /usr/lib/arm-linux-gnueabihf/openbo
           ├─1172 /usr/lib/chromium-browser/chromium-browser-v7 --enable-pinch -
           ├─1208 /usr/lib/chromium-browser/crashpad_handler --monitor-self --mo
           ├─1210 /usr/lib/chromium-browser/crashpad_handler --no-periodic-tasks
           ├─1214 /usr/lib/chromium-browser/chromium-browser-v7 --type=zygote --
           ├─1215 /usr/lib/chromium-browser/chromium-browser-v7 --type=zygote --
           ├─1217 /usr/lib/chromium-browser/chromium-browser-v7 --type=zygote --
           ├─1247 /usr/lib/chromium-browser/chromium-browser-v7 --type=utility -
           ├─1262 /usr/lib/chromium-browser/chromium-browser-v7 --type=gpu-proce
           ├─1264 /usr/lib/chromium-browser/chromium-browser-v7 --type=broker
           ├─1273 /usr/lib/chromium-browser/chromium-browser-v7 --type=utility -
           └─1287 /usr/lib/chromium-browser/chromium-browser-v7 --type=renderer
lines 1-23...skipping...
● volumio-kiosk.service - Volumio Kiosk
   Loaded: loaded (/lib/systemd/system/volumio-kiosk.service; disabled; vendor preset: enabled)
   Active: active (running) since Fri 2024-01-19 18:23:52 CET; 1 weeks 5 days ago
 Main PID: 1033 (startx)
    Tasks: 76 (limit: 1563)
   CGroup: /system.slice/volumio-kiosk.service
           ├─1033 /bin/sh /usr/bin/startx /etc/X11/Xsession /opt/volumiokiosk.sh -- -nocursor
           ├─1056 xinit /etc/X11/Xsession /opt/volumiokiosk.sh -- /usr/bin/X :0 -nocursor -auth /tmp/serverauth.y7Qny0yCQv
           ├─1057 /usr/lib/xorg/Xorg :0 -nocursor -auth /tmp/serverauth.y7Qny0yCQv
           ├─1138 /bin/bash /opt/volumiokiosk.sh
           ├─1164 /usr/bin/ssh-agent /opt/volumiokiosk.sh
           ├─1171 /usr/bin/openbox --startup /usr/lib/arm-linux-gnueabihf/openbox-autostart OPENBOX
           ├─1172 /usr/lib/chromium-browser/chromium-browser-v7 --enable-pinch --simulate-outdated-no-au=Tue, 31 Dec 2099 23:59:
           ├─1208 /usr/lib/chromium-browser/crashpad_handler --monitor-self --monitor-self-annotation=ptype=crashpad-handler --d
           ├─1210 /usr/lib/chromium-browser/crashpad_handler --no-periodic-tasks --monitor-self-annotation=ptype=crashpad-handle
           ├─1214 /usr/lib/chromium-browser/chromium-browser-v7 --type=zygote --no-zygote-sandbox --force-device-scale-factor=1
           ├─1215 /usr/lib/chromium-browser/chromium-browser-v7 --type=zygote --force-device-scale-factor=1 --enable-crashpad --
           ├─1217 /usr/lib/chromium-browser/chromium-browser-v7 --type=zygote --force-device-scale-factor=1 --enable-crashpad --
           ├─1247 /usr/lib/chromium-browser/chromium-browser-v7 --type=utility --utility-sub-type=network.mojom.NetworkService -
           ├─1262 /usr/lib/chromium-browser/chromium-browser-v7 --type=gpu-process --field-trial-handle=15721063334234145369,943
           ├─1264 /usr/lib/chromium-browser/chromium-browser-v7 --type=broker
           ├─1273 /usr/lib/chromium-browser/chromium-browser-v7 --type=utility --utility-sub-type=storage.mojom.StorageService -
           └─1287 /usr/lib/chromium-browser/chromium-browser-v7 --type=renderer --disable-breakpad --force-device-scale-factor=1

Jan 19 18:23:53 volumio startx[1033]:         Before reporting problems, check http://wiki.x.org
Jan 19 18:23:53 volumio startx[1033]:         to make sure that you have the latest version.
Jan 19 18:23:53 volumio startx[1033]: Markers: (--) probed, (**) from config file, (==) default setting,
Jan 19 18:23:53 volumio startx[1033]:         (++) from command line, (!!) notice, (II) informational,
Jan 19 18:23:53 volumio startx[1033]:         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
Jan 19 18:23:53 volumio startx[1033]: (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 19 18:23:53 2024
lines 1-30...skipping...
● volumio-kiosk.service - Volumio Kiosk
   Loaded: loaded (/lib/systemd/system/volumio-kiosk.service; disabled; vendor preset: enabled)
   Active: active (running) since Fri 2024-01-19 18:23:52 CET; 1 weeks 5 days ago
 Main PID: 1033 (startx)
    Tasks: 76 (limit: 1563)
   CGroup: /system.slice/volumio-kiosk.service
           ├─1033 /bin/sh /usr/bin/startx /etc/X11/Xsession /opt/volumiokiosk.sh -- -nocursor
           ├─1056 xinit /etc/X11/Xsession /opt/volumiokiosk.sh -- /usr/bin/X :0 -nocursor -auth /tmp/serverauth.y7Qny0yCQv
           ├─1057 /usr/lib/xorg/Xorg :0 -nocursor -auth /tmp/serverauth.y7Qny0yCQv
           ├─1138 /bin/bash /opt/volumiokiosk.sh
           ├─1164 /usr/bin/ssh-agent /opt/volumiokiosk.sh
           ├─1171 /usr/bin/openbox --startup /usr/lib/arm-linux-gnueabihf/openbox-autostart OPENBOX
           ├─1172 /usr/lib/chromium-browser/chromium-browser-v7 --enable-pinch --simulate-outdated-no-au=Tue, 31 Dec 2099 23:59:
           ├─1208 /usr/lib/chromium-browser/crashpad_handler --monitor-self --monitor-self-annotation=ptype=crashpad-handler --d
           ├─1210 /usr/lib/chromium-browser/crashpad_handler --no-periodic-tasks --monitor-self-annotation=ptype=crashpad-handle
           ├─1214 /usr/lib/chromium-browser/chromium-browser-v7 --type=zygote --no-zygote-sandbox --force-device-scale-factor=1
           ├─1215 /usr/lib/chromium-browser/chromium-browser-v7 --type=zygote --force-device-scale-factor=1 --enable-crashpad --
           ├─1217 /usr/lib/chromium-browser/chromium-browser-v7 --type=zygote --force-device-scale-factor=1 --enable-crashpad --
           ├─1247 /usr/lib/chromium-browser/chromium-browser-v7 --type=utility --utility-sub-type=network.mojom.NetworkService -
           ├─1262 /usr/lib/chromium-browser/chromium-browser-v7 --type=gpu-process --field-trial-handle=15721063334234145369,943
           ├─1264 /usr/lib/chromium-browser/chromium-browser-v7 --type=broker
           ├─1273 /usr/lib/chromium-browser/chromium-browser-v7 --type=utility --utility-sub-type=storage.mojom.StorageService -
           └─1287 /usr/lib/chromium-browser/chromium-browser-v7 --type=renderer --disable-breakpad --force-device-scale-factor=1

Jan 19 18:23:53 volumio startx[1033]:         Before reporting problems, check http://wiki.x.org
Jan 19 18:23:53 volumio startx[1033]:         to make sure that you have the latest version.
Jan 19 18:23:53 volumio startx[1033]: Markers: (--) probed, (**) from config file, (==) default setting,
Jan 19 18:23:53 volumio startx[1033]:         (++) from command line, (!!) notice, (II) informational,
Jan 19 18:23:53 volumio startx[1033]:         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
Jan 19 18:23:53 volumio startx[1033]: (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 19 18:23:53 2024
Jan 19 18:23:53 volumio startx[1033]: (==) Using config directory: "/etc/X11/xorg.conf.d"
Jan 19 18:23:53 volumio startx[1033]: (==) Using system config directory "/usr/share/X11/xorg.conf.d"
Jan 19 18:23:56 volumio startx[1033]: [1B blob data]
Jan 19 18:23:57 volumio startx[1033]: waiting for X server to begin accepting connections .
~
~

Franky_Byte · February 1, 2024, 9:04am

This is how I did it

installed Volumio and “simply” configured it

System restart

installed and activated the Touch Display 3.37 plugin from the store

System restart

changed the userconfig.txt :
dtoverlay=vc4-kms-v3d
dtoverlay=vc4-kms-dsi-waveshare-panel,7_9_inch,rotation=90

System restart

peppy_screensaver_beta_1.3.9 installed and activated

sudo bash -c 'cat << EOF >  /etc/X11/xorg.conf.d/99-vc4.conf
Section "OutputClass"
    Identifier "vc4"
    MatchDriver "vc4"
    Driver "modesetting"
    Option "PrimaryGPU" "true"
EndSection
EOF'

System restart

eMCZe · February 1, 2024, 9:08am

Is it not a problem with date? I see every where JAN 19. The same date I was if had problem with Touch Display plugin.

Jan 19 18:53:43

Problem was solved after changing time and date.

What time is it if you put command:

date