[Plugin] pirate audio

Plugins
261

Hi Ken, I will try to give you some step by step to install everything from 0. I have the Pirate audio DAC with a raspberry pi zero 2 so the configuration should be the same.

  1. Download Volumio: https://volumio.com/en/get-started/

  2. Install with BalenaEtcher: balenaEtcher - Flash OS images to SD cards & USB drives and use it to install volumio in yout SD card

  3. Boot your Volumio and set it up

  4. Configure I2C Dac and Volume Options:
    

    DAC options
    DAC options2286×1398 163 KB

    Dac options 2
    Dac options 22084×902 97.9 KB

  5. Restart

  6. Install Pirate Audio pluging:
    • To enable the beta channel go to: http://{yourvolumioaddress}/dev and click “Plugins test mode”
    • Go back to the plugings menu and in System hardware search for the Pirate Audio plugin and install it

  7. Restart

  8. Go to the plugins menu again and under installed plugins click on Pirate Audio settings. The GPIO for Y-button depends on pirate audio hat type and not on raspberry pi type / model. For mine is on 24

    dac options 3
    dac options 32872×1058 162 KB

1 Like