MPD tweak`s

[norrest]

Hi!
to add some tweaks to MPD congig file!
For example in /etc/mpd.conf add line

priority "FIFO:99"
As i understand, need add in sqlite db file and php (config mpd)

Anybody do this?

[norrest]

@norrest

Hi!
to add some tweaks to MPD congig file!
For example in /etc/mpd.conf add line

priority "FIFO:99"
As i understand, need add in sqlite db file and php (config mpd)

Anybody do this?

Also have many options like

use_mmap
Setting this allows you to use memory-mapped I/O. Certain
hardware setups may benefit from this, but most do not. Most
users do not need to set this. The default is to not use
memory-mapped I/O.

  period_time <time in microseconds>
          This   sets  the  time  between  hardware  sample  transfers  in
          microseconds.   Increasing  this  can  reduce  CPU  usage  while
          lowering  it  can  reduce  underrun  errors on bandwidth-limited
          devices.  Some users have reported good results with this set to
          50000, but not all devices support values this high.  Most users
          do not  need  to  change  this.   The  default  is  256000000  /
          sample_rate(kHz), or 5804 microseconds for CD-quality audio