volumio@tidalpi:~$ cat /boot/config.txt
initramfs volumio.initrd
#GPU_MEM=32
max_usb_current=1
dtparam=audio=on
audio_pwm_mode=2
dtparam=i2c_arm=on
disable_splash=1
hdmi_force_hotplug=1
force_eeprom_read=0
include userconfig.txt
Touch Display gpu_mem setting below: do not alter
gpu_mem=64
volumio@tidalpi:~$
volumio@tidalpi:~$ cat /boot/userconfig.txt
Add your custom config.txt options to this file, which will be pre
served during updates
#dtoverlay=vc4-fkms-v3d
max_framebuffers=2
volumio@tidalpi:~$
volumio@tidalpi:~$ cat /var/log/Xorg.0.log
[ 44.163]
X.Org X Server 1.20.4
X Protocol Version 11, Revision 0
[ 44.163] Build Operating System: Linux 5.4.0-109-generic armv8l
Raspbian
[ 44.163] Current Operating System: Linux tidalpi 5.10.92-v7+ #15
14 SMP Mon Jan 17 17:36:39 GMT 2022 armv7l
[ 44.164] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 s
nd_bcm2835.enable_compat_alsa=0 snd_bcm2835.enable_hdmi=1 bcm2708_fb
.fbwidth=800 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_
base=0x3ec00000 vc_mem.mem_size=0x40000000 splash plymouth.ignore-s
erial-consoles dwc_otg.fiq_enable=1 dwc_otg.fiq_fsm_enable=1 dwc_otg
.fiq_fsm_mask=0xF dwc_otg.nak_holdoff=1 quiet console=ttyS0,115200 c
onsole=tty1 imgpart=/dev/mmcblk0p2 imgfile=/volumio_current.sqsh roo
twait bootdelay=5 elevator=noop logo.nologo vt.global_cursor_default
=0 net.ifnames=0 snd-bcm2835.enable_compat_alsa=0 snd_bcm2835.enable
_hdmi=1 loglevel=0
[ 44.164] Build Date: 09 November 2022 03:13:10PM
[ 44.164] xorg-server 2:1.20.4-1+rpt4+deb10u6 (https://www.debian
.org/support)
[ 44.164] Current version of pixman: 0.36.0
[ 44.164] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 44.164] Markers: (–) probed, () from config file, (==) defau
lt setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown
.
[ 44.164] (==) Log file: “/var/log/Xorg.0.log”, Time: Wed Jan 4
14:25:49 2023
[ 44.174] (==) Using config directory: “/etc/X11/xorg.conf.d”
[ 44.175] (==) Using system config directory “/usr/share/X11/xorg
.conf.d”
[ 44.183] (==) No Layout section. Using the first Screen section
.
[ 44.184] (==) No screen section available. Using defaults.
[ 44.184] () |–>Screen “Default Screen Section” (0)
[ 44.184] (**) | |–>Monitor “”
[ 44.190] (==) No monitor specified for screen “Default Screen Se
ction”.
Using a default monitor configuration.
[ 44.190] (==) Automatically adding devices
[ 44.190] (==) Automatically enabling devices
[ 44.190] (==) Automatically adding GPU devices
[ 44.196] (==) Max clients allowed: 256, resource mask: 0x1fffff
[ 44.197] (WW) The directory “/usr/share/fonts/X11/cyrillic” does
not exist.
[ 44.197] Entry deleted from font path.
[ 44.198] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/100dpi/:unscaled,
/usr/share/fonts/X11/75dpi/:unscaled,
/usr/share/fonts/X11/Type1,
/usr/share/fonts/X11/100dpi,
/usr/share/fonts/X11/75dpi,
built-ins
[ 44.198] (==) ModulePath set to “/usr/lib/xorg/modules”
[ 44.198] (II) The server relies on udev to provide the list of i
nput devices.
If no devices become available, reconfigure udev or disable
AutoAddDevices.
[ 44.198] (II) Loader magic: 0x1fdf80
[ 44.198] (II) Module ABI versions:
[ 44.198] X.Org ANSI C Emulation: 0.4
[ 44.198] X.Org Video Driver: 24.0
[ 44.198] X.Org XInput driver : 24.1
[ 44.198] X.Org Server Extension : 10.0
[ 44.201] (–) using VT number 2
[ 44.201] (II) systemd-logind: logind integration requires -keept
ty and -keeptty was not provided, disabling logind integration
[ 44.202] (II) no primary bus or device found
[ 44.202] (II) LoadModule: “glx”
[ 44.203] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 44.250] (II) Module glx: vendor=“X.Org Foundation”
[ 44.250] compiled for 1.20.4, module version = 1.0.0
[ 44.250] ABI class: X.Org Server Extension, version 10.0
[ 44.250] (==) Matched modesetting as autoconfigured driver 0
[ 44.250] (==) Matched fbdev as autoconfigured driver 1
[ 44.250] (==) Assigned the driver to the xf86ConfigLayout
[ 44.250] (II) LoadModule: “modesetting”
[ 44.252] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_
drv.so
[ 44.257] (II) Module modesetting: vendor=“X.Org Foundation”
[ 44.257] compiled for 1.20.4, module version = 1.20.4
[ 44.257] Module class: X.Org Video Driver
[ 44.257] ABI class: X.Org Video Driver, version 24.0
[ 44.257] (II) LoadModule: “fbdev”
[ 44.258] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 44.260] (II) Module fbdev: vendor=“X.Org Foundation”
[ 44.260] compiled for 1.20.3, module version = 0.5.0
[ 44.260] Module class: X.Org Video Driver
[ 44.260] ABI class: X.Org Video Driver, version 24.0
[ 44.266] (II) modesetting: Driver for Modesetting Kernel Drivers
: kms
[ 44.266] (II) FBDEV: driver for framebuffer: fbdev
[ 44.270] (WW) Falling back to old probe method for modesetting
[ 44.270] (EE) open /dev/dri/card0: No such file or directory
[ 44.270] (WW) Falling back to old probe method for fbdev
[ 44.270] (II) Loading sub module “fbdevhw”
[ 44.270] (II) LoadModule: “fbdevhw”
[ 44.271] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 44.275] (II) Module fbdevhw: vendor=“X.Org Foundation”
[ 44.275] compiled for 1.20.4, module version = 0.0.2
[ 44.275] ABI class: X.Org Video Driver, version 24.0
[ 44.275] (II) FBDEV(0): using default device
[ 44.275] (WW) VGA arbiter: cannot open kernel arbiter, no multi-
card support
[ 44.276] (II) FBDEV(0): Creating default Display subsection in S
creen section
“Default Screen Section” for depth/fbbpp 24/32
[ 44.276] (==) FBDEV(0): Depth 24, (==) framebuffer bpp 32
[ 44.276] (==) FBDEV(0): RGB weight 888
[ 44.276] (==) FBDEV(0): Default visual is TrueColor
[ 44.276] (==) FBDEV(0): Using gamma correction (1.0, 1.0, 1.0)
[ 44.276] (II) FBDEV(0): hardware: BCM2708 FB (video memory: 1500
kB)
[ 44.276] (DB) xf86MergeOutputClassOptions unsupported bus type 0
[ 44.276] (II) FBDEV(0): checking modes against framebuffer devic
e…
[ 44.276] (II) FBDEV(0): checking modes against monitor…
[ 44.276] (II) FBDEV(0): Virtual size is 800x480 (pitch 800)
[ 44.276] () FBDEV(0): Built-in mode “current”
[ 44.276] (==) FBDEV(0): DPI set to (96, 96)
[ 44.276] (II) Loading sub module “fb”
[ 44.276] (II) LoadModule: “fb”
[ 44.276] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 44.282] (II) Module fb: vendor=“X.Org Foundation”
[ 44.282] compiled for 1.20.4, module version = 1.0.0
[ 44.282] ABI class: X.Org ANSI C Emulation, version 0.4
[ 44.282] () FBDEV(0): using shadow framebuffer
[ 44.282] (II) Loading sub module “shadow”
[ 44.282] (II) LoadModule: “shadow”
[ 44.282] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 44.285] (II) Module shadow: vendor=“X.Org Foundation”
[ 44.285] compiled for 1.20.4, module version = 1.1.0
[ 44.285] ABI class: X.Org ANSI C Emulation, version 0.4
[ 44.285] (II) UnloadModule: “modesetting”
[ 44.285] (II) Unloading modesetting
[ 44.309] (==) FBDEV(0): Backing store enabled
[ 44.314] (==) FBDEV(0): DPMS enabled
[ 44.315] (II) Initializing extension Generic Event Extension
[ 44.316] (II) Initializing extension SHAPE
[ 44.317] (II) Initializing extension MIT-SHM
[ 44.318] (II) Initializing extension XInputExtension
[ 44.322] (II) Initializing extension XTEST
[ 44.323] (II) Initializing extension BIG-REQUESTS
[ 44.324] (II) Initializing extension SYNC
[ 44.325] (II) Initializing extension XKEYBOARD
[ 44.326] (II) Initializing extension XC-MISC
[ 44.326] (II) Initializing extension SECURITY
[ 44.327] (II) Initializing extension XFIXES
[ 44.328] (II) Initializing extension RENDER
[ 44.329] (II) Initializing extension RANDR
[ 44.331] (II) Initializing extension COMPOSITE
[ 44.334] (II) Initializing extension DAMAGE
[ 44.335] (II) Initializing extension MIT-SCREEN-SAVER
[ 44.336] (II) Initializing extension DOUBLE-BUFFER
[ 44.337] (II) Initializing extension RECORD
[ 44.338] (II) Initializing extension DPMS
[ 44.339] (II) Initializing extension Present
[ 44.339] (II) Initializing extension DRI3
[ 44.339] (II) Initializing extension X-Resource
[ 44.340] (II) Initializing extension XVideo
[ 44.341] (II) Initializing extension XVideo-MotionCompensation
[ 44.341] (II) Initializing extension SELinux
[ 44.341] (II) SELinux: Disabled on system
[ 44.341] (II) Initializing extension GLX
[ 44.342] (II) AIGLX: Screen 0 is not DRI2 capable
[ 45.562] (II) IGLX: Loaded and initialized swrast
[ 45.562] (II) GLX: Initialized DRISWRAST GL provider for screen
0
[ 45.562] (II) Initializing extension XFree86-VidModeExtension
[ 45.563] (II) Initializing extension XFree86-DGA
[ 45.564] (II) Initializing extension XFree86-DRI
[ 45.568] (II) Initializing extension DRI2
[ 45.895] (II) config/udev: Adding input device raspberrypi-ts (/
dev/input/event0)
[ 45.895] () raspberrypi-ts: Applying InputClass “libinput touc
hscreen catchall”
[ 45.895] () raspberrypi-ts: Applying InputClass “Touch rotatio
n”
[ 45.895] (II) LoadModule: “libinput”
[ 45.896] (II) Loading /usr/lib/xorg/modules/input/libinput_drv.s
o
[ 45.935] (II) Module libinput: vendor=“X.Org Foundation”
[ 45.935] compiled for 1.20.3, module version = 0.28.2
[ 45.935] Module class: X.Org XInput Driver
[ 45.935] ABI class: X.Org XInput driver, version 24.1
[ 45.935] (II) Using input driver ‘libinput’ for ‘raspberrypi-ts’
[ 45.935] () raspberrypi-ts: always reports core events
[ 45.935] () Option “Device” “/dev/input/event0”
[ 45.936] () Option “_source” “server/udev”
[ 45.958] (II) event0 - raspberrypi-ts: is tagged by udev as: To
uchscreen
[ 45.961] (II) event0 - raspberrypi-ts: device is a touch device
[ 45.962] (II) event0 - raspberrypi-ts: device removed
[ 46.030] () Option “config_info” “udev:/sys/devices/platform/s
oc/soc:firmware/soc:firmware:touchscreen/input/input0/event0”
[ 46.030] (II) XINPUT: Adding extended input device “raspberrypi-
ts” (type: TOUCHSCREEN, id 6)
[ 46.030] () Option “AccelerationScheme” “none”
[ 46.031] () raspberrypi-ts: (accel) selected scheme none/0
[ 46.031] () raspberrypi-ts: (accel) acceleration factor: 2.000
[ 46.031] () raspberrypi-ts: (accel) acceleration threshold: 4
[ 46.036] (II) event0 - raspberrypi-ts: is tagged by udev as: To
uchscreen
[ 46.038] (II) event0 - raspberrypi-ts: device is a touch device
[ 46.040] (II) config/udev: Adding input device raspberrypi-ts (/
dev/input/mouse0)
[ 46.040] (II) No input driver specified, ignoring this device.
[ 46.040] (II) This device may have been added with another devic
e file.