How do I install Volumio on an SDXC 128GB card?


I’m trying to install volumio on an SanDisk Ultra SDXC 128GB card. I used the RPi Imager utility to do this.

A straightforward write does not work - it fails verification. Reading whatever I could find on the web, I then formatted the card as FAT32, but writing the image again changes it back to ext4 and makes the image unreadable.

Any suggestions?

Write the image as explained and put your SD in the PI. Don’t try to read it. It is not because ext4 is not readable by your computer than it is unreadable!
quick start
But never tested with 128Go SD though…

I use a 128GB SDXC card, the same brand, which works fine, no difference from smaller cards.