Display setup for Waveshare 9.3" Display

[eMCZe]

@ejwhyte

I have tried several variations of the below:

hdmi_group=2
hdmi_mode=87
hdmi_drive=2
hdmi_force_mode=1
hdmi_cvt=1600 600 60 6 0 0 0

or

hdmi_cvt=1600 600 60
hdmi_group=2
hdmi_mode=87
hdmi_force_mode=1
max_framebuffer_width=1600
max_framebuffer_height=600
framebuffer_width=1600
framebuffer_height=600

Hi,

It is not working on Pi5. You should try the same like on Pi5 with 7,9 and 11,9:

Issues with RPi5 + Waveshare HDMI display

Stop the Touch Display plugin. On Volumio’s command line become root by excuting su (root’s password is “volumio”, too). Then execute cat >> /etc/X11/xorg.conf.d/99-vc4.conf <<EOL Section "OutputClass" Identifier "vc4" MatchDriver "vc4" Driver "modesetting" Option "PrimaryGPU" "true" EndSection EOL Start the Touch Display plugin again.