5" Touchscreen Display Support ILI9486L

[TheRiflesSpiral]

I found a thread that had details for a similar display using the same driver.

Volumio with 3.5" TFT Touch Screen (GPIO) RPi 3B+

Connect to Volumio via SSH. Open the file “/boot/userconfig.txt”: sudo nano /boot/userconfig.txt Add the following lines: dtparam=spi=on hdmi_drive=1 hdmi_group=2 hdmi_mode=87 hdmi_cvt 800 480 60 6 0 0 0 dtoverlay=ads7846 dtparam=cs=1 dtparam=penirq=25 dtparam=penirq_pull=2 dtparam=speed=50000 dtparam=swapxy=0 dtparam=pmax=255 dtparam=xohms=150 dtparam=xmin=200 dtparam=xmax=3900 dtparam=ymin=200 dtparam=ymax=3900 To close nano and save “/boot/userconfig.txt” type Ctrl+x, y and Enter. Reboo…

Following the instructions there (changing the contents of /boot/userconfig.txt) sorted it out.