3.779 - after upgrade Raspberry Pi touchscreen display does not work any more

[adpe45]

Hi @nerd, please find attached logs as requested:

http://logs.volumio.org/volumio/jwt8DOw.html

dmesg.txt (27.9 KB)
lsmod.txt (4.0 KB)
udev.txt (132 Bytes)

> volumio@volumiopi:~$ cat /boot/userconfig.txt
> # Add your custom config.txt options to this file, which will be preserved during updates
> 
> #### Touch Display rotation setting below: do not alter ####
> lcd_rotate=2
> display_hdmi_rotate=2
> volumio@volumiopi:~$ sudo udevadm monitor -p > udev.txt &
> [1] 4268
> volumio@volumiopi:~$ sudo dtoverlay vc4-kms-v3d
> 
> [1]+  Stopped                 sudo udevadm monitor -p > udev.txt
> volumio@volumiopi:~$ sudo dtoverlay vc4-kms-dsi-7inch
> * Failed to apply overlay '1_vc4-kms-dsi-7inch' (kernel)
> volumio@volumiopi:~$ fg
> sudo udevadm monitor -p > udev.txt
> [sudo] password for volumio:
> ^C
> volumio@volumiopi:~$ dmesg > dmesg.txt
> volumio@volumiopi:~$ lsmod > lsmod.txt
> volumio@volumiopi:~$

Thank you!

Aleks

[nerd]

Hey @adpe45,

Interesting!

Please update /boot/userconfig.txt with:

[all]
display_auto_detect=1
dtoverlay=vc4-kms-v3d
dtoverlay=vc4-kms-dsi-7inch

After reboot:

List loaded modules by lsmod > lsmod.txt and attach lsmod.txt to your report.
Post link of your new bug report log with your report.

Kind Regards,

[adpe45]

Hi @nerd, as requested, here are files/logs

After reboot, display is working!!

Regards,

Aleks

lsmod.txt (4.3 KB)

volumio@volumiopi:~$ cat /boot/userconfig.txt
# Add your custom config.txt options to this file, which will be preserved during updates

#### Touch Display rotation setting below: do not alter ####
lcd_rotate=2
display_hdmi_rotate=2

[all]
display_auto_detect=1
dtoverlay=vc4-kms-v3d
dtoverlay=vc4-kms-dsi-7inch

volumio@volumiopi:~$ Connection to 192.168.41.113 closed by remote host.
Connection to 192.168.41.113 closed.

and after reboot:

Volumio Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
Welcome to Volumio for Raspberry Pi (6.6.56-v7+ armv7l)
volumio@volumiopi:~$ lsmod > lsmod.txt
volumio@volumiopi:~$

[Scott_Seager]

Bingo, this has fixed it for me too!

[Dmitri]

Hi @nerd, please find attached logs as requested:
Unfortunately, I can’t attach files to the message yet.
log

lsmod.txt

Module Size Used by
vc4 360448 2
snd_soc_hdmi_codec 16384 1
drm_display_helper 16384 1 vc4
cec 45056 1 vc4
drm_dma_helper 20480 2 vc4
drm_kms_helper 192512 2 drm_dma_helper,vc4
drm 593920 5 drm_dma_helper,vc4,drm_display_helper,drm_kms_helper
drm_panel_orientation_quirks 12288 1 drm
snd_soc_core 266240 2 vc4,snd_soc_hdmi_codec
snd_compress 16384 1 snd_soc_core
snd_pcm_dmaengine 16384 1 snd_soc_core
cmac 12288 1
bnep 16384 2
nft_chain_nat 12288 4
xt_REDIRECT 12288 1
nf_nat 49152 2 nft_chain_nat,xt_REDIRECT
nf_conntrack 143360 2 xt_REDIRECT,nf_nat
nf_defrag_ipv6 16384 1 nf_conntrack
nf_defrag_ipv4 12288 1 nf_conntrack
xt_tcpudp 12288 1
nft_compat 16384 2
nf_tables 249856 5 nft_compat,nft_chain_nat
nfnetlink 20480 2 nft_compat,nf_tables
8021q 28672 0
garp 12288 1 8021q
stp 12288 1 garp
llc 12288 2 garp,stp
joydev 16384 0
snd_usb_audio 278528 1
snd_hwdep 12288 1 snd_usb_audio
brcmfmac_wcc 12288 0
snd_usbmidi_lib 28672 1 snd_usb_audio
snd_seq_midi 12288 0
snd_seq_midi_event 12288 1 snd_seq_midi
brcmfmac 356352 1 brcmfmac_wcc
raspberrypi_ts 12288 0
snd_rawmidi 32768 2 snd_seq_midi,snd_usbmidi_lib
hci_uart 40960 0
btbcm 20480 1 hci_uart
raspberrypi_hwmon 12288 0
bluetooth 544768 24 hci_uart,bnep,btbcm
brcmutil 16384 1 brcmfmac
snd_bcm2835 24576 2
snd_pcm 126976 6 snd_compress,snd_usb_audio,snd_pcm_dmaengine,snd_soc_hdmi_codec,snd_bcm2835,snd_soc_core
cfg80211 872448 1 brcmfmac
bcm2835_codec 49152 0
bcm2835_v4l2 45056 0
snd_seq 73728 2 snd_seq_midi_event,snd_seq_midi
snd_seq_device 12288 3 snd_seq,snd_rawmidi,snd_seq_midi
videobuf2_vmalloc 12288 1 bcm2835_v4l2
snd_timer 32768 2 snd_seq,snd_pcm
bcm2835_isp 28672 0
ecdh_generic 12288 2 bluetooth
ecc 40960 1 ecdh_generic
v4l2_mem2mem 36864 1 bcm2835_codec
bcm2835_mmal_vchiq 32768 3 bcm2835_isp,bcm2835_codec,bcm2835_v4l2
rfkill 28672 5 bluetooth,cfg80211
snd 94208 18 snd_compress,snd_hwdep,snd_seq,snd_usb_audio,snd_soc_hdmi_codec,snd_timer,snd_rawmidi,snd_usbmidi_lib,snd_seq_device,snd_bcm2835,snd_soc_core,snd_pcm
videobuf2_dma_contig 16384 2 bcm2835_isp,bcm2835_codec
videobuf2_memops 12288 2 videobuf2_dma_contig,videobuf2_vmalloc
videobuf2_v4l2 28672 4 bcm2835_isp,bcm2835_codec,bcm2835_v4l2,v4l2_mem2mem
videodev 286720 5 bcm2835_isp,bcm2835_codec,bcm2835_v4l2,v4l2_mem2mem,videobuf2_v4l2
raspberrypi_gpiomem 12288 0
videobuf2_common 65536 8 bcm2835_isp,bcm2835_codec,videobuf2_dma_contig,videobuf2_vmalloc,videobuf2_memops,bcm2835_v4l2,v4l2_mem2mem,videobuf2_v4l2
vc_sm_cma 32768 2 bcm2835_isp,bcm2835_mmal_vchiq
mc 53248 7 bcm2835_isp,bcm2835_codec,snd_usb_audio,videobuf2_common,videodev,v4l2_mem2mem,videobuf2_v4l2
rpi_backlight 12288 0
backlight 16384 3 rpi_backlight,drm_kms_helper,drm
uio_pdrv_genirq 12288 0
uio 20480 1 uio_pdrv_genirq
i2c_dev 12288 0
ip_tables 28672 0
x_tables 32768 4 ip_tables,nft_compat,xt_tcpudp,xt_REDIRECT
ipv6 528384 72
uas 24576 0
squashfs 49152 1
overlay 135168 1
nls_iso8859_1 12288 0
fuse 135168 1
i2c_bcm2835 12288 0
fixed 12288 0

dmesg.txt

[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 6.6.56-v7+ (dom@buildbot) (arm-linux-gnueabihf-gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #1803 SMP Thu Oct 10 14:08:55 BST 2024
[ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2
[ 0.000000] random: crng init done
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] Reserved memory: created CMA memory pool at 0x34000000, size 64 MiB
[ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[ 0.000000] OF: reserved mem: 0x34000000…0x37ffffff (65536 KiB) map reusable linux,cma
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x0000000000000000-0x0000000037ffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x0000000000000000-0x0000000037ffffff]
[ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000037ffffff]
[ 0.000000] percpu: Embedded 18 pages/cpu s41812 r8192 d23724 u73728
[ 0.000000] pcpu-alloc: s41812 r8192 d23724 u73728 alloc=18*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
[ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=800 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 splash plymouth.ignore-serial-consoles dwc_otg.fiq_enable=1 dwc_otg.fiq_fsm_enable=1 dwc_otg.fiq_fsm_mask=0xF dwc_otg.nak_holdoff=1 quiet console=ttyS0,115200 console=tty1 imgpart=UUID=ed280c2b-b4b4-43e6-87d7-b67377eacab2 imgfile=/volumio_current.sqsh bootpart=UUID=FCA2-3F9A datapart=UUID=0367e456-8c2f-458a-8465-47f124ad9fdd uuidconfig=cmdline.txt pcie_aspm=off pci=pcie_bus_safe rootwait bootdelay=7 logo.nologo vt.global_cursor_default=0 net.ifnames=0 snd-bcm2835.enable_compat_alsa= snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 loglevel=0 nodebug use_kmsg=no
[ 0.000000] Unknown kernel command line parameters “splash nodebug imgpart=UUID=ed280c2b-b4b4-43e6-87d7-b67377eacab2 imgfile=/volumio_current.sqsh bootpart=UUID=FCA2-3F9A datapart=UUID=0367e456-8c2f-458a-8465-47f124ad9fdd uuidconfig=cmdline.txt pcie_aspm=off pci=pcie_bus_safe bootdelay=7 use_kmsg=no”, will be passed to user space.
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 227360
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[ 0.000000] Memory: 796008K/917504K available (11264K kernel code, 1476K rwdata, 3256K rodata, 1024K init, 606K bss, 55960K reserved, 65536K cma-reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] ftrace: allocating 36450 entries in 107 pages
[ 0.000000] ftrace: allocated 107 pages with 5 groups
[ 0.000000] trace event string verifier disabled
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] Rude variant of Tasks RCU enabled.
[ 0.000000] Tracing variant of Tasks RCU enabled.
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[ 0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[ 0.000019] Switching to timer-based delay loop, resolution 52ns
[ 0.000409] Console: colour dummy device 80x30
[ 0.000427] printk: console [tty1] enabled
[ 0.000532] Calibrating delay loop (skipped), value calculated using timer frequency… 38.40 BogoMIPS (lpj=192000)
[ 0.000554] CPU: Testing write buffer coherency: ok
[ 0.000609] pid_max: default: 32768 minimum: 301
[ 0.000723] LSM: initializing lsm=capability,integrity
[ 0.000917] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.000939] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[ 0.001976] cgroup: Disabling memory control group subsystem
[ 0.002543] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[ 0.003544] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.003643] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1.
[ 0.003796] Setting up static identity map for 0x100000 - 0x10003c
[ 0.003944] rcu: Hierarchical SRCU implementation.
[ 0.003953] rcu: Max phase no-delay instances is 1000.
[ 0.004639] smp: Bringing up secondary CPUs …
[ 0.005538] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[ 0.006438] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002
[ 0.007262] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003
[ 0.007369] smp: Brought up 1 node, 4 CPUs
[ 0.007390] SMP: Total of 4 processors activated (153.60 BogoMIPS).
[ 0.007404] CPU: All CPU(s) started in HYP mode.
[ 0.007411] CPU: Virtualization extensions available.
[ 0.008550] devtmpfs: initialized
[ 0.021625] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4
[ 0.021840] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.021868] futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
[ 0.024279] pinctrl core: initialized pinctrl subsystem
[ 0.025282] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[ 0.027817] DMA: preallocated 1024 KiB pool for atomic coherent allocations
[ 0.033308] audit: initializing netlink subsys (disabled)
[ 0.033550] audit: type=2000 audit(0.030:1): state=initialized audit_enabled=0 res=1
[ 0.034111] thermal_sys: Registered thermal governor ‘step_wise’
[ 0.034672] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[ 0.034689] hw-breakpoint: maximum watchpoint size is 8 bytes.
[ 0.035013] Serial: AMBA PL011 UART driver
[ 0.039359] bcm2835-mbox 3f00b880.mailbox: mailbox enabled
[ 0.060031] raspberrypi-firmware soc:firmware: Attached to firmware from 2024-09-13T16:00:01, variant start
[ 0.070044] raspberrypi-firmware soc:firmware: Firmware hash is ddfba3e3c234500025b545512b4b214f28e453e9
[ 0.084455] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[ 0.087091] bcm2835-dma 3f007000.dma-controller: DMA legacy API manager, dmachans=0x1
[ 0.088759] SCSI subsystem initialized
[ 0.088995] usbcore: registered new interface driver usbfs
[ 0.089044] usbcore: registered new interface driver hub
[ 0.089096] usbcore: registered new device driver usb
[ 0.089493] pps_core: LinuxPPS API ver. 1 registered
[ 0.089503] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti giometti@linux.it
[ 0.089529] PTP clock support registered
[ 0.091534] clocksource: Switched to clocksource arch_sys_counter
[ 0.091973] VFS: Disk quotas dquot_6.6.0
[ 0.092027] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.092154] FS-Cache: Loaded
[ 0.096394] CacheFiles: Loaded
[ 0.105769] NET: Registered PF_INET protocol family
[ 0.106047] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[ 0.108560] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[ 0.108596] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[ 0.108617] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[ 0.108730] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
[ 0.109058] TCP: Hash tables configured (established 8192 bind 8192)
[ 0.109188] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.109242] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[ 0.109440] NET: Registered PF_UNIX/PF_LOCAL protocol family
[ 0.109939] RPC: Registered named UNIX socket transport module.
[ 0.109951] RPC: Registered udp transport module.
[ 0.109959] RPC: Registered tcp transport module.
[ 0.109966] RPC: Registered tcp-with-tls transport module.
[ 0.109973] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.110790] Trying to unpack rootfs image as initramfs…
[ 0.131947] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available
[ 1.427545] Freeing initrd memory: 28068K
[ 2.060401] Initialise system trusted keyrings
[ 2.060706] workingset: timestamp_bits=14 max_order=18 bucket_order=4
[ 2.060780] zbud: loaded
[ 2.061601] NFS: Registering the id_resolver key type
[ 2.061632] Key type id_resolver registered
[ 2.061641] Key type id_legacy registered
[ 2.061673] nfs4filelayout_init: NFSv4 File Layout Driver Registering…
[ 2.061684] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering…
[ 2.062427] Key type asymmetric registered
[ 2.062439] Asymmetric key parser ‘x509’ registered
[ 2.062514] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 2.062528] io scheduler mq-deadline registered
[ 2.062538] io scheduler kyber registered
[ 2.062590] io scheduler bfq registered
[ 2.064471] pinctrl-bcm2835 3f200000.gpio: GPIO_OUT persistence: yes
[ 2.067125] bcm2708_fb soc:fb: FB found 1 display(s)
[ 2.074698] Console: switching to colour frame buffer device 100x30
[ 2.079720] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 800x480
[ 2.083795] bcm2835-rng 3f104000.rng: hwrng registered
[ 2.084108] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB)
[ 2.095728] brd: module loaded
[ 2.103140] loop: module loaded
[ 2.103735] Loading iSCSI transport class v2.0-870.
[ 2.105209] usbcore: registered new interface driver lan78xx
[ 2.105256] usbcore: registered new interface driver smsc95xx
[ 2.105268] dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
[ 2.833338] Core Release: 2.80a
[ 2.833360] Setting default values for core params
[ 2.833386] Finished setting default values for core params
[ 3.033658] Using Buffer DMA mode
[ 3.033667] Periodic Transfer Interrupt Enhancement - disabled
[ 3.033675] Multiprocessor Interrupt Enhancement - disabled
[ 3.033683] OTG VER PARAM: 0, OTG VER FLAG: 0
[ 3.033722] Dedicated Tx FIFOs mode

[ 3.034222] WARN::dwc_otg_hcd_init:1070: FIQ DMA bounce buffers: virt = b4104000 dma = 0xf4104000 len=9024
[ 3.034261] FIQ FSM acceleration enabled for :
Non-periodic Split Transactions
Periodic Split Transactions
High-Speed Isochronous Endpoints
Interrupt/Control Split Transaction hack enabled
[ 3.034276] dwc_otg: Microframe scheduler enabled

[ 3.034385] WARN::hcd_init_fiq:457: FIQ on core 1

[ 3.034404] WARN::hcd_init_fiq:458: FIQ ASM at 80887df0 length 36

[ 3.034425] WARN::hcd_init_fiq:496: MPHI regs_base at b8810000
[ 3.034449] dwc_otg 3f980000.usb: DWC OTG Controller
[ 3.034501] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
[ 3.034539] dwc_otg 3f980000.usb: irq 89, io mem 0x00000000
[ 3.034592] Init: Port Power? op_state=1
[ 3.034600] Init: Power Port (0)
[ 3.034805] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06
[ 3.034824] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 3.034839] usb usb1: Product: DWC OTG Controller
[ 3.034850] usb usb1: Manufacturer: Linux 6.6.56-v7+ dwc_otg_hcd
[ 3.034861] usb usb1: SerialNumber: 3f980000.usb
[ 3.035508] hub 1-0:1.0: USB hub found
[ 3.035552] hub 1-0:1.0: 1 port detected
[ 3.036164] dwc_otg: FIQ enabled
[ 3.036173] dwc_otg: NAK holdoff enabled
[ 3.036180] dwc_otg: FIQ split-transaction FSM enabled
[ 3.036195] Module dwc_common_port init
[ 3.036451] usbcore: registered new interface driver usb-storage
[ 3.036653] mousedev: PS/2 mouse device common for all mice
[ 3.038799] sdhci: Secure Digital Host Controller Interface driver
[ 3.038810] sdhci: Copyright(c) Pierre Ossman
[ 3.039018] sdhci-pltfm: SDHCI platform and OF driver helper
[ 3.040815] ledtrig-cpu: registered to indicate activity on CPUs
[ 3.041225] hid: raw HID events driver (C) Jiri Kosina
[ 3.041333] usbcore: registered new interface driver usbhid
[ 3.041344] usbhid: USB HID core driver
[ 3.045956] Initializing XFRM netlink socket
[ 3.046014] NET: Registered PF_PACKET protocol family
[ 3.046117] Key type dns_resolver registered
[ 3.046636] Registering SWP/SWPB emulation handler
[ 3.078319] registered taskstats version 1
[ 3.078545] Loading compiled-in X.509 certificates
[ 3.090959] Key type .fscrypt registered
[ 3.090982] Key type fscrypt-provisioning registered
[ 3.099346] uart-pl011 3f201000.serial: cts_event_workaround enabled
[ 3.099828] 3f201000.serial: ttyAMA1 at MMIO 0x3f201000 (irq = 114, base_baud = 0) is a PL011 rev2
[ 3.100174] serial serial0: tty port ttyAMA1 registered
[ 3.103198] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
[ 3.103481] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
[ 3.104709] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0
[ 3.104726] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated
[ 3.132531] sdhost: log_buf @ 148efa27 (f4107000)
[ 3.161652] Indeed it is in host mode hprt0 = 00021501
[ 3.185527] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
[ 3.187927] of_cfs_init
[ 3.188060] of_cfs_init: OK
[ 3.188464] clk: Disabling unused clocks
[ 3.218741] mmc0: host does not support reading read-only switch, assuming write-enable
[ 3.222160] mmc0: Host Software Queue enabled
[ 3.222184] mmc0: new high speed SDHC card at address 0007
[ 3.223189] mmcblk0: mmc0:0007 SD4GB 3.71 GiB
[ 3.223734] Freeing unused kernel image (initmem) memory: 1024K
[ 3.224336] Run /init as init process
[ 3.224346] with arguments:
[ 3.224352] /init
[ 3.224358] splash
[ 3.224364] nodebug
[ 3.224371] with environment:
[ 3.224377] HOME=/
[ 3.224383] TERM=linux
[ 3.224389] imgpart=UUID=ed280c2b-b4b4-43e6-87d7-b67377eacab2
[ 3.224397] imgfile=/volumio_current.sqsh
[ 3.224404] bootpart=UUID=FCA2-3F9A
[ 3.224411] datapart=UUID=0367e456-8c2f-458a-8465-47f124ad9fdd
[ 3.224418] uuidconfig=cmdline.txt
[ 3.224425] pcie_aspm=off
[ 3.224431] pci=pcie_bus_safe
[ 3.224438] bootdelay=7
[ 3.224444] use_kmsg=no
[ 3.226456] mmcblk0: p1 p2 p3
[ 3.227262] mmcblk0: mmc0:0007 SD4GB 3.71 GiB
[ 3.327733] mmc1: new high speed SDIO card at address 0001
[ 3.391612] usb 1-1: new high-speed USB device number 2 using dwc_otg
[ 3.391797] Indeed it is in host mode hprt0 = 00001101
[ 3.651905] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
[ 3.651942] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 3.652967] hub 1-1:1.0: USB hub found
[ 3.653084] hub 1-1:1.0: 5 ports detected
[ 3.971616] usb 1-1.1: new high-speed USB device number 3 using dwc_otg
[ 4.119166] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
[ 4.119206] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 4.122424] smsc95xx v2.0.0
[ 4.265622] SMSC LAN8700 usb-001:003:01: attached PHY driver (mii_bus:phy_addr=usb-001:003:01, irq=199)
[ 4.266488] smsc95xx 1-1.1:1.0 eth0: register ‘smsc95xx’ at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:2e:fc:d2
[ 4.273648] fuse: init (API version 7.39)
[ 4.361789] usb 1-1.4: new high-speed USB device number 4 using dwc_otg
[ 4.455627] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 4.496996] usbcore: registered new interface driver uas
[ 4.521876] usb 1-1.4: New USB device found, idVendor=0d8c, idProduct=0004, bcdDevice= 2.08
[ 4.521935] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 4.521968] usb 1-1.4: Product: USB2.0 High-Speed True HD Audio
[ 4.521991] usb 1-1.4: Manufacturer: C-Media Electronics Inc.
[ 4.548619] input: C-Media Electronics Inc. USB2.0 High-Speed True HD Audio as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.2/0003:0D8C:0004.0001/input/input0
[ 4.612139] hid-generic 0003:0D8C:0004.0001: input,hidraw0: USB HID v1.00 Device [C-Media Electronics Inc. USB2.0 High-Speed True HD Audio] on usb-3f980000.usb-1.4/input2
[ 12.394998] EXT4-fs (mmcblk0p2): mounted filesystem ed280c2b-b4b4-43e6-87d7-b67377eacab2 r/w with ordered data mode. Quota mode: none.
[ 46.057211] loop0: detected capacity change from 0 to 994880
[ 46.269589] EXT4-fs (mmcblk0p3): mounted filesystem 0367e456-8c2f-458a-8465-47f124ad9fdd r/w with ordered data mode. Quota mode: none.
[ 47.805845] systemd[1]: System time before build time, advancing clock.
[ 48.074079] NET: Registered PF_INET6 protocol family
[ 48.075531] Segment Routing with IPv6
[ 48.075578] In-situ OAM (IOAM) with IPv6
[ 48.266538] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
[ 48.270875] systemd[1]: Detected architecture arm.
[ 48.368182] systemd[1]: Set hostname to .
[ 49.249502] systemd[1]: /lib/systemd/system/winbind.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/winbindd.pid \xe2\x86\x92 /run/samba/winbindd.pid; please update the unit file accordingly.
[ 49.563057] systemd[1]: Listening on fsck to fsckd communication Socket.
[ 49.564432] systemd[1]: Listening on udev Control Socket.
[ 49.564873] systemd[1]: Listening on udev Kernel Socket.
[ 49.565822] systemd[1]: Listening on Journal Audit Socket.
[ 49.674008] systemd[1]: Listening on RPCbind Server Activation Socket.
[ 49.675225] systemd[1]: Listening on Journal Socket.
[ 50.231929] i2c_dev: i2c /dev entries driver
[ 52.796806] systemd-journald[336]: Received request to flush runtime journal from PID 1
[ 53.257800] mc: Linux media interface: v0.10
[ 53.269646] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned.
[ 53.271198] bcm2835_vc_sm_cma_probe: Videocore shared memory driver
[ 53.271239] [vc_sm_connected_init]: start
[ 53.276880] [vc_sm_connected_init]: installed successfully
[ 53.331828] rpi-gpiomem 3f200000.gpiomem: window base 0x3f200000 size 0x00001000
[ 53.332262] rpi-gpiomem 3f200000.gpiomem: initialised 1 regions as /dev/gpiomem
[ 53.516698] videodev: Linux video capture interface: v2.00
[ 53.624853] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned.
[ 53.760342] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned.
[ 53.801986] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13
[ 53.811748] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14
[ 53.816408] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15
[ 53.821769] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16
[ 53.821819] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 53.821855] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 53.821872] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 53.821887] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 53.835101] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20
[ 53.835618] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21
[ 53.836017] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22
[ 53.836340] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23
[ 53.836371] bcm2835-isp bcm2835-isp: Register output node 0 with media controller
[ 53.836392] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller
[ 53.836408] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller
[ 53.836423] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller
[ 53.836632] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp
[ 54.135126] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned.
[ 54.140146] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned.
[ 54.208845] bcm2835-codec bcm2835-codec: Device registered as /dev/video10
[ 54.208901] bcm2835-codec bcm2835-codec: Loaded V4L2 decode
[ 54.214334] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 54.224186] bcm2835-codec bcm2835-codec: Device registered as /dev/video11
[ 54.224243] bcm2835-codec bcm2835-codec: Loaded V4L2 encode
[ 54.258114] Loaded X.509 cert ‘benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf’
[ 54.260776] Loaded X.509 cert ‘romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328’
[ 54.282335] Loaded X.509 cert ‘sforshee: 00b28ddf47aef9cea7’
[ 54.285130] Loaded X.509 cert ‘wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600’
[ 54.286726] bcm2835-codec bcm2835-codec: Device registered as /dev/video12
[ 54.286780] bcm2835-codec bcm2835-codec: Loaded V4L2 isp
[ 54.291220] bcm2835-codec bcm2835-codec: Device registered as /dev/video18
[ 54.291279] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx
[ 54.294683] bcm2835-codec bcm2835-codec: Device registered as /dev/video31
[ 54.294751] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image
[ 54.311487] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
[ 54.312797] snd_bcm2835: unknown parameter ‘enable_compat_alsa’ ignored
[ 54.328996] bcm2835_audio bcm2835_audio: card created with 8 channels
[ 54.357362] Bluetooth: Core ver 2.22
[ 54.357832] NET: Registered PF_BLUETOOTH protocol family
[ 54.357886] Bluetooth: HCI device and connection manager initialized
[ 54.391630] Bluetooth: HCI socket layer initialized
[ 54.391682] Bluetooth: L2CAP socket layer initialized
[ 54.391729] Bluetooth: SCO socket layer initialized
[ 54.568684] Bluetooth: HCI UART driver ver 2.3
[ 54.568718] Bluetooth: HCI UART protocol H4 registered
[ 54.568830] Bluetooth: HCI UART protocol Three-wire (H5) registered
[ 54.570183] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator
[ 54.570467] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator
[ 54.619275] Bluetooth: HCI UART protocol Broadcom registered
[ 54.678227] input: raspberrypi-ts as /devices/platform/soc/soc:firmware/soc:firmware:touchscreen/input/input1
[ 54.681852] uart-pl011 3f201000.serial: no DMA platform data
[ 54.835478] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[ 54.842113] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1
[ 54.846693] usbcore: registered new interface driver brcmfmac
[ 54.950086] Bluetooth: hci0: BCM: chip id 94
[ 54.950648] Bluetooth: hci0: BCM: features 0x2e
[ 54.954199] Bluetooth: hci0: BCM43430A1
[ 54.954277] Bluetooth: hci0: BCM43430A1 (001.002.009) build 0000
[ 54.988461] Bluetooth: hci0: BCM43430A1 ‘brcm/BCM43430A1.hcd’ Patch
[ 55.204316] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2)
[ 55.205536] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Jul 19 2021 03:24:18 version 7.45.98 (TOB) (56df937 CY) FWID 01-8e14b897
[ 55.640913] usbcore: registered new interface driver snd-usb-audio
[ 55.912854] Bluetooth: hci0: BCM: features 0x2e
[ 55.916093] Bluetooth: hci0: BCM43438A1 37.4MHz Raspberry Pi 3-0141
[ 55.916132] Bluetooth: hci0: BCM43430A1 (001.002.009) build 0508
[ 56.930537] alsactl[534]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set
[ 58.006863] warning: `iwconfig’ uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211
[ 58.024224] 8021q: 802.1Q VLAN Support v1.8
[ 58.138187] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled
[ 58.315108] smsc95xx 1-1.1:1.0 eth0: hardware isn’t capable of remote wakeup
[ 58.318054] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off
[ 61.983294] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 61.983322] Bluetooth: BNEP filters: protocol multicast
[ 61.983342] Bluetooth: BNEP socket layer initialized
[ 61.991016] Bluetooth: MGMT ver 1.22
[ 64.823136] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled
[ 67.264777] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled
[ 86.020926] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled
[ 87.411750] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled
[ 450.302222] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /reserved-memory/linux,cma/size
[ 450.302255] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/i2c@7e805000/status
[ 450.302267] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/fb/status
[ 450.302279] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/pixelvalve@7e206000/status
[ 450.302290] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/pixelvalve@7e207000/status
[ 450.302301] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/pixelvalve@7e807000/status
[ 450.302314] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/hvs@7e400000/status
[ 450.302327] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/hdmi@7e902000/status
[ 450.302338] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/v3d@7ec00000/status
[ 450.302349] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/gpu/status
[ 450.302361] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/cprman@7e101000/claim-clocks
[ 450.302375] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/txp@7e004000/status
[ 450.302387] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /chosen/bootargs
[ 450.303938] Console: switching to colour dummy device 80x30
[ 450.730180] vc4-drm soc:gpu: bound 3f400000.hvs (ops vc4_hvs_ops [vc4])
[ 450.731606] Registered IR keymap rc-cec
[ 450.731779] rc rc0: vc4-hdmi as /devices/platform/soc/3f902000.hdmi/rc/rc0
[ 450.733236] input: vc4-hdmi as /devices/platform/soc/3f902000.hdmi/rc/rc0/input2
[ 450.738440] input: vc4-hdmi HDMI Jack as /devices/platform/soc/3f902000.hdmi/sound/card1/input3
[ 450.741902] vc4-drm soc:gpu: bound 3f902000.hdmi (ops vc4_hdmi_ops [vc4])
[ 450.742363] vc4-drm soc:gpu: bound 3f004000.txp (ops vc4_txp_ops [vc4])
[ 450.742676] vc4-drm soc:gpu: bound 3f206000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 450.742951] vc4-drm soc:gpu: bound 3f207000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 450.743171] vc4-drm soc:gpu: bound 3f807000.pixelvalve (ops vc4_crtc_ops [vc4])
[ 450.743341] vc4-drm soc:gpu: bound 3fc00000.v3d (ops vc4_v3d_ops [vc4])
[ 450.747838] [drm] Initialized vc4 0.0.0 20140616 for soc:gpu on minor 0
[ 450.748818] vc4-drm soc:gpu: [drm] Cannot find any crtc or sizes
[ 450.749777] vc4-drm soc:gpu: [drm] Cannot find any crtc or sizes
[ 460.627247] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/i2c0mux/i2c@1/status
[ 460.627299] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/dsi@7e700000/status
[ 460.627407] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/i2c0mux/i2c@1/status
[ 460.627429] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/i2c@7e205000/status
[ 460.627441] OF: overlay: WARNING: memory leak will occur if overlay removed, property: /soc/i2c0mux/status
[ 460.627468] OF: overlay: ERROR: multiple fragments add, update, and/or delete property /soc/i2c0mux/i2c@1/status

udev.txt

monitor will print the received events for:
UDEV - the event which udev sends out after rule processing
KERNEL - the kernel uevent

[nerd]

Hey @Dmitri,

I don’t see /boot/userconfig.txt file in your setup. Has it been deleted by accident?

When in ssh session please create file

touch /boot/userconfig.txt

Add discussed previously parameters

Reboot

Kind Regards,

[Dmitri]

Hi @nerd,
I have created a file userconfig.txt and added the parameters you specified there. The screen started working correctly, and I was able to install and run the Touch Screen plugin. Thank you very much for your help!
P.S. But still, something has changed in the latest firmware version. After all, previously it was not necessary to specify additional parameters in the file userconfig.txt
Sincerely, Dmitri

[nerd]

Hey @Dmitri,

Volumio ecosystem is continuously evolving, partly to include a new hardware. You can read in this post what has changed and why.

Volumio Changelog

CHANGELOG 3.779 (14-11-2024) FIXES Improved translations Fix Multiroom Buffer Sizes Increase results for Kana-Kanji Conversion Fix for streaming interruptions Fix pop noise on FS change and PCM/DSD transition on Motivo Fix for HiFiBerry HATs not initialized properly on RPi Fix for DSD Quirk for Marantz SA-12 on Rivo and Primo v2 Increased stability of internal UART interface on Integro NEW ADDITIONS Bump RPi kernel to 6.6.56, support for RPi5 2GB Dedicated entry for RPi5 on some I2S…

Kind Regards,

[Knut]

So far I have used the original Raspi 7” display with my Raspi 3B+. After updating from the previous version to the current version: 3.779 RELEASE DATE: 08-11-2024 the display no longer works.
At first I tried the update within the installed Volumio, later I tried a complete reinstallation. Neither was successful.
Normally the touchscreen reacts when the system is switched on (briefly lights up), but in this case it does not do so either.
What is the cause of the problem? In the update or in the person sitting in front of the player?

----------------------------- Delete here & above before posting below -----------------

[nerd]

After receiving numerous requests for assistance via PM, for the benefit of the Volumio community:

Issue Summary:

After upgrading to Volumio version 3.779, users reported that the Raspberry Pi official touchscreen display stopped functioning. This was due to missing or misconfigured parameters in the system configuration.

Resolution:

To resolve the issue, you need to update the /boot/userconfig.txt file with the necessary parameters and overlays to enable the touchscreen functionality. Follow these steps:

Steps to Fix:

1. Access the Raspberry Pi: Use SSH or connect a keyboard and monitor to access the terminal.
2. Edit the Configuration File: Open the /boot/userconfig.txt file using a text editor:

sudo nano /boot/userconfig.txt

3. Add or Update the Following Parameters:

# Set device scope
[all]

# Enable display vc4 autodetection
display_auto_detect=1

# Add touchscreen-specific overlays
dtoverlay=rpi-ft5406
dtoverlay=vc4-kms-v3d
dtoverlay=vc4-kms-dsi-7inch

# Ensure backlight control works
gpio=18=op,dh

Save and Exit: In nano, press CTRL+O, then Enter to save. Press CTRL+X to exit.

Reboot the Device: Apply the changes by rebooting the Raspberry Pi:

sudo reboot

Explanation of Parameters:

• [all]: Any configuration specified under the scope [all] in the configuration file applies to all devices connected to the Raspberry Pi.
• display_auto_detect=1: Automatic Display Detection. When set to 1, the Raspberry Pi will automatically detect the type of display connected at boot time (e.g., an HDMI monitor or the official Raspberry Pi touchscreen).
• dtoverlay=rpi-ft5406: Activates the touchscreen controller.
• dtoverlay=vc4-kms-v3d & dtoverlay=vc4-kms-dsi-7inch: Configure the graphics and display for the official 7-inch touchscreen.
• gpio=18=op,dh: Configures GPIO 18 for backlight control.

The Touch Display Plugin

There is a dedicated thread for configuring and use of the plug-in and as such, all related questions should be posted here:

[PLUGIN] Touch Display

I have rewritten and extended the touch display plugin. The following features have been added to the plugin’s configuration page: Screen saver The options allow setting the timeout in seconds until the screen saver (DPMS state “off”) gets invoked. A value of 0 disables the screen saver. Further more it is possible to block the screen saver as long as Volumio is in playing state. Screen brightness For the Raspberry Foundation 7" touch screen the screen brightness can be set. If current s…

Additional Notes:

• Make sure to power down after making changes.
• If the issue persists, double-check the edits and connections.
• If using HDMI simultaneously, you might need additional configuration.

This fix has resolved the issue for most users experiencing problems with version 3.779 or newer. Let us know if further assistance is needed!

Kind Regards,

[Jonathr67]

@nerd

sudo nano /boot/usrconfig.txt

Hi, this solution doesn’t work with my installation (volumio 3.785 / official touchscreen V1. Screen is still black

[Wheaten]

yeah is a typo.
It’s :sudo nano /boot/userconfig.txt

[Jonathr67]

Hi ! It works again, thank you!

[nerd]

Dear Volumionauts,

This thread is dealing with the Official Raspberry Pi Touch Display (hardware) discovery and is now closed.

For Touch Display (software) plugin please head to:

[PLUGIN] Touch Display

I have rewritten and extended the touch display plugin. The following features have been added to the plugin’s configuration page: Screen saver The options allow setting the timeout in seconds until the screen saver (DPMS state “off”) gets invoked. A value of 0 disables the screen saver. Further more it is possible to block the screen saver as long as Volumio is in playing state. Screen brightness For the Raspberry Foundation 7" touch screen the screen brightness can be set. If current s…

Kind Regards,