[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.12.27+ (dom@buildbot) (arm-linux-gnueabihf-gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #1876 Tue May 6 15:06:44 BST 2025 [ 0.000000] CPU: ARMv6-compatible processor [410fb767] revision 7 (ARMv7), cr=00c5387d [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi Model B Rev 2 [ 0.000000] random: crng init done [ 0.000000] Memory policy: Data cache writeback [ 0.000000] Reserved memory: created CMA memory pool at 0x17c00000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x17c00000..0x1bbfffff (65536 KiB) map reusable linux,cma [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000000000000-0x000000001dffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x000000001dffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x000000001dffffff] [ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 [ 0.000000] pcpu-alloc: [0] 0 [ 0.000000] Kernel command line: coherent_pool=1M snd_bcm2835.enable_headphones=0 cgroup_disable=memory snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1824 bcm2708_fb.fbheight=984 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x1ec00000 vc_mem.mem_size=0x20000000 splash plymouth.ignore-serial-consoles dwc_otg.fiq_enable=1 dwc_otg.fiq_fsm_enable=1 dwc_otg.fiq_fsm_mask=0xF dwc_otg.nak_holdoff=1 quiet console=ttyAMA0,115200 console=tty1 imgpart=UUID=9aae75e3-71dc-4cd8-81c2-e432641843a7 imgfile=/volumio_current.sqsh bootpart=UUID=0F99-EC7C datapart=UUID=6fee81e4-7bf1-40e5-aaed-c3a77319b96c uuidconfig=cmdline.txt pcie_aspm=off pci=pcie_bus_safe rootwait bootdelay=7 logo.nologo vt.global_cursor_default=0 net.ifnames=0 snd-bcm2835.enable_compat_alsa= snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 loglevel=0 nodebug use_kmsg=no [ 0.000000] cgroup: Disabling memory control group subsystem [ 0.000000] Unknown kernel command line parameters "splash nodebug imgpart=UUID=9aae75e3-71dc-4cd8-81c2-e432641843a7 imgfile=/volumio_current.sqsh bootpart=UUID=0F99-EC7C datapart=UUID=6fee81e4-7bf1-40e5-aaed-c3a77319b96c uuidconfig=cmdline.txt pcie_aspm=off pci=pcie_bus_safe bootdelay=7 use_kmsg=no", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 122880 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] SLUB: HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 [ 0.000000] ftrace: allocating 35853 entries in 106 pages [ 0.000000] ftrace: allocated 106 pages with 4 groups [ 0.000000] RCU Tasks Rude: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. [ 0.000000] RCU Tasks Trace: Setting shift to 0 and lim to 1 rcu_task_cb_adjust=1 rcu_task_cpu_ids=1. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000009] sched_clock: 32 bits at 1000kHz, resolution 1000ns, wraps every 2147483647500ns [ 0.000070] clocksource: timer: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275 ns [ 0.000167] bcm2835: system timer (irq = 27) [ 0.001036] Console: colour dummy device 80x30 [ 0.001080] printk: legacy console [tty1] enabled [ 0.001225] Calibrating delay loop... 697.95 BogoMIPS (lpj=3489792) [ 0.060264] CPU: Testing write buffer coherency: ok [ 0.060369] pid_max: default: 32768 minimum: 301 [ 0.060541] LSM: initializing lsm=capability [ 0.060918] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.060966] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 0.121107] Setting up static identity map for 0x8220 - 0x8258 [ 0.121861] Memory: 369008K/491520K available (10319K kernel code, 1592K rwdata, 3384K rodata, 484K init, 371K bss, 54760K reserved, 65536K cma-reserved) [ 0.122795] devtmpfs: initialized [ 0.141102] VFP support v0.3: implementor 41 architecture 1 part 20 variant b rev 5 [ 0.141478] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.141539] futex hash table entries: 256 (order: -1, 3072 bytes, linear) [ 0.151543] pinctrl core: initialized pinctrl subsystem [ 0.153497] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.156261] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.162052] audit: initializing netlink subsys (disabled) [ 0.163655] thermal_sys: Registered thermal governor 'step_wise' [ 0.164281] hw-breakpoint: found 6 breakpoint and 1 watchpoint registers. [ 0.164321] hw-breakpoint: maximum watchpoint size is 4 bytes. [ 0.164826] Serial: AMBA PL011 UART driver [ 0.170906] audit: type=2000 audit(0.160:1): state=initialized audit_enabled=0 res=1 [ 0.171335] bcm2835-mbox 2000b880.mailbox: mailbox enabled [ 0.190956] raspberrypi-firmware soc:firmware: Attached to firmware from 2025-04-30T13:35:18, variant start [ 0.201002] raspberrypi-firmware soc:firmware: Firmware hash is 5560078dcc8591a00f57b9068d13e5544aeef3aa [ 0.216930] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.242730] bcm2835-dma 20007000.dma-controller: DMA legacy API manager, dmachans=0x1 [ 0.245482] SCSI subsystem initialized [ 0.245942] usbcore: registered new interface driver usbfs [ 0.246049] usbcore: registered new interface driver hub [ 0.246177] usbcore: registered new device driver usb [ 0.246944] pps_core: LinuxPPS API ver. 1 registered [ 0.246979] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.247059] PTP clock support registered [ 0.252853] clocksource: Switched to clocksource timer [ 2.723523] VFS: Disk quotas dquot_6.6.0 [ 2.723643] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.748519] NET: Registered PF_INET protocol family [ 2.748884] IP idents hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 2.751268] tcp_listen_portaddr_hash hash table entries: 1024 (order: 0, 4096 bytes, linear) [ 2.751344] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.751387] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear) [ 2.751476] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear) [ 2.751585] TCP: Hash tables configured (established 4096 bind 4096) [ 2.751735] UDP hash table entries: 256 (order: 0, 4096 bytes, linear) [ 2.751795] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes, linear) [ 2.752161] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.753490] RPC: Registered named UNIX socket transport module. [ 2.753535] RPC: Registered udp transport module. [ 2.753549] RPC: Registered tcp transport module. [ 2.753561] RPC: Registered tcp-with-tls transport module. [ 2.753573] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 2.757988] Initialise system trusted keyrings [ 2.758670] Trying to unpack rootfs image as initramfs... [ 2.779144] workingset: timestamp_bits=14 max_order=17 bucket_order=3 [ 2.780968] NFS: Registering the id_resolver key type [ 2.781052] Key type id_resolver registered [ 2.781072] Key type id_legacy registered [ 2.781135] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 2.781161] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 2.782629] Key type asymmetric registered [ 2.782676] Asymmetric key parser 'x509' registered [ 2.782941] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 2.782979] io scheduler mq-deadline registered [ 2.782999] io scheduler kyber registered [ 2.783145] io scheduler bfq registered [ 2.786011] pinctrl-bcm2835 20200000.gpio: GPIO_OUT persistence: yes [ 12.218689] Freeing initrd memory: 33320K [ 12.221366] ledtrig-cpu: registered to indicate activity on CPUs [ 12.243746] bcm2708_fb soc:fb: FB found 1 display(s) [ 12.306755] Console: switching to colour frame buffer device 228x61 [ 12.341139] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1824x984 [ 12.350414] bcm2835-rng 20104000.rng: hwrng registered [ 12.351117] vc-mem: phys_addr:0x00000000 mem_base=0x1ec00000 mem_size:0x20000000(512 MiB) [ 12.378848] brd: module loaded [ 12.393095] loop: module loaded [ 12.394534] Loading iSCSI transport class v2.0-870. [ 12.397298] usbcore: registered new interface driver smsc95xx [ 12.397351] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 13.126000] Core Release: 2.80a [ 13.126067] Setting default values for core params [ 13.126111] Finished setting default values for core params [ 13.326461] Using Buffer DMA mode [ 13.326497] Periodic Transfer Interrupt Enhancement - disabled [ 13.326518] Multiprocessor Interrupt Enhancement - disabled [ 13.326533] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 13.326564] Dedicated Tx FIFOs mode [ 13.329144] WARN::dwc_otg_hcd_init:1072: FIQ DMA bounce buffers: virt = d7d14000 dma = 0x97d14000 len=9024 [ 13.329222] FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints Interrupt/Control Split Transaction hack enabled [ 13.329253] dwc_otg: Microframe scheduler enabled [ 13.329435] WARN::hcd_init_fiq:457: FIQ on core 0 [ 13.329474] WARN::hcd_init_fiq:458: FIQ ASM at c076d508 length 36 [ 13.329530] WARN::hcd_init_fiq:496: MPHI regs_base at de810000 [ 13.329588] dwc_otg 20980000.usb: DWC OTG Controller [ 13.329674] dwc_otg 20980000.usb: new USB bus registered, assigned bus number 1 [ 13.329768] dwc_otg 20980000.usb: irq 56, io mem 0x00000000 [ 13.329854] Init: Port Power? op_state=1 [ 13.329873] Init: Power Port (0) [ 13.330520] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.12 [ 13.330576] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 13.330605] usb usb1: Product: DWC OTG Controller [ 13.330627] usb usb1: Manufacturer: Linux 6.12.27+ dwc_otg_hcd [ 13.330652] usb usb1: SerialNumber: 20980000.usb [ 13.332205] hub 1-0:1.0: USB hub found [ 13.332378] hub 1-0:1.0: 1 port detected [ 13.334000] dwc_otg: FIQ enabled [ 13.334045] dwc_otg: NAK holdoff enabled [ 13.334062] dwc_otg: FIQ split-transaction FSM enabled [ 13.334097] Module dwc_common_port init [ 13.334908] usbcore: registered new interface driver usb-storage [ 13.335662] mousedev: PS/2 mouse device common for all mice [ 13.338759] sdhci: Secure Digital Host Controller Interface driver [ 13.338806] sdhci: Copyright(c) Pierre Ossman [ 13.339281] sdhci-pltfm: SDHCI platform and OF driver helper [ 13.339433] hid: raw HID events driver (C) Jiri Kosina [ 13.339661] usbcore: registered new interface driver usbhid [ 13.339690] usbhid: USB HID core driver [ 13.346420] armv6-pmu arm-pmu: hw perfevents: no irqs for PMU, sampling events not supported [ 13.346829] hw perfevents: enabled with armv6_1176 PMU driver, 3 (00000007) counters available [ 13.349380] Initializing XFRM netlink socket [ 13.349516] NET: Registered PF_PACKET protocol family [ 13.349706] Key type dns_resolver registered [ 13.398511] registered taskstats version 1 [ 13.398786] Loading compiled-in X.509 certificates [ 13.431172] uart-pl011 20201000.serial: cts_event_workaround enabled [ 13.432180] 20201000.serial: ttyAMA0 at MMIO 0x20201000 (irq = 81, base_baud = 0) is a PL011 rev2 [ 13.432312] printk: legacy console [ttyAMA0] enabled [ 13.437531] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 13.439252] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 13.441964] of_cfs_init [ 13.442287] of_cfs_init: OK [ 13.444164] clk: Disabling unused clocks [ 13.445260] PM: genpd: Disabling unused power domains [ 13.463230] Indeed it is in host mode hprt0 = 00021501 [ 13.581725] sdhost-bcm2835 20202000.mmc: loaded - DMA enabled (>1) [ 13.589190] Freeing unused kernel image (initmem) memory: 484K [ 13.589254] Kernel memory protection not selected by kernel config. [ 13.589355] Run /init as init process [ 13.589375] with arguments: [ 13.589388] /init [ 13.589400] splash [ 13.589429] nodebug [ 13.589445] with environment: [ 13.589456] HOME=/ [ 13.589468] TERM=linux [ 13.589480] imgpart=UUID=9aae75e3-71dc-4cd8-81c2-e432641843a7 [ 13.589493] imgfile=/volumio_current.sqsh [ 13.589506] bootpart=UUID=0F99-EC7C [ 13.589519] datapart=UUID=6fee81e4-7bf1-40e5-aaed-c3a77319b96c [ 13.589532] uuidconfig=cmdline.txt [ 13.589560] pcie_aspm=off [ 13.589574] pci=pcie_bus_safe [ 13.589588] bootdelay=7 [ 13.589600] use_kmsg=no [ 13.653090] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 13.653401] Indeed it is in host mode hprt0 = 00001101 [ 13.761935] mmc0: host does not support reading read-only switch, assuming write-enable [ 13.766391] mmc0: new high speed SDHC card at address aaaa [ 13.768339] mmcblk0: mmc0:aaaa SD32G 29.7 GiB [ 13.773604] mmcblk0: p1 p2 p3 [ 13.775956] mmcblk0: mmc0:aaaa SD32G 29.7 GiB (quirks 0x00004000) [ 13.913895] usb 1-1: New USB device found, idVendor=0424, idProduct=9512, bcdDevice= 2.00 [ 13.913995] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 13.915681] hub 1-1:1.0: USB hub found [ 13.915898] hub 1-1:1.0: 3 ports detected [ 14.213281] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 14.323470] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [ 14.323539] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 14.329359] smsc95xx v2.0.0 [ 14.567452] SMSC LAN8700 usb-001:003:01: attached PHY driver (mii_bus:phy_addr=usb-001:003:01, irq=160) [ 14.569043] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-20980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:53:44:73 [ 14.653118] usb 1-1.3: new full-speed USB device number 4 using dwc_otg [ 14.777355] usb 1-1.3: New USB device found, idVendor=05e3, idProduct=0606, bcdDevice= 7.02 [ 14.777435] usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 14.777468] usb 1-1.3: Product: USB Hub 2.0 [ 14.777492] usb 1-1.3: Manufacturer: ALCOR [ 14.779292] hub 1-1.3:1.0: USB hub found [ 14.780069] hub 1-1.3:1.0: 4 ports detected [ 15.093088] usb 1-1.3.2: new full-speed USB device number 5 using dwc_otg [ 15.210391] usb 1-1.3.2: not running at top speed; connect to a high speed hub [ 15.232724] usb 1-1.3.2: New USB device found, idVendor=148f, idProduct=5370, bcdDevice= 1.01 [ 15.232807] usb 1-1.3.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 15.232931] usb 1-1.3.2: Product: 802.11 n WLAN [ 15.232968] usb 1-1.3.2: Manufacturer: Ralink [ 15.232996] usb 1-1.3.2: SerialNumber: 1.0 [ 15.326024] usb 1-1.3.3: new full-speed USB device number 6 using dwc_otg [ 15.406210] usb 1-1.3.3: device descriptor read/64, error -32 [ 15.593050] usb 1-1.3.3: device descriptor read/64, error -32 [ 15.793074] usb 1-1.3.3: new full-speed USB device number 7 using dwc_otg [ 15.873010] usb 1-1.3.3: device descriptor read/64, error -32 [ 16.066583] usb 1-1.3.3: device descriptor read/64, error -32 [ 16.187857] usb 1-1.3-port3: attempt power cycle [ 16.793142] usb 1-1.3.3: new full-speed USB device number 8 using dwc_otg [ 17.213055] usb 1-1.3.3: device not accepting address 8, error -32 [ 17.293049] usb 1-1.3.3: new full-speed USB device number 9 using dwc_otg [ 17.713040] usb 1-1.3.3: device not accepting address 9, error -32 [ 17.713557] usb 1-1.3-port3: unable to enumerate USB device [ 17.792960] usb 1-1.3.4: new full-speed USB device number 10 using dwc_otg [ 17.898414] usb 1-1.3.4: New USB device found, idVendor=05e3, idProduct=0606, bcdDevice= 7.02 [ 17.898486] usb 1-1.3.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 17.898519] usb 1-1.3.4: Product: USB Hub 2.0 [ 17.898545] usb 1-1.3.4: Manufacturer: ALCOR [ 17.901732] hub 1-1.3.4:1.0: USB hub found [ 17.902994] hub 1-1.3.4:1.0: 4 ports detected [ 19.545978] fuse: init (API version 7.41) [ 19.851042] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 19.918859] usbcore: registered new interface driver uas [ 28.938054] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 28.988432] EXT4-fs (mmcblk0p2): recovery complete [ 28.988878] EXT4-fs (mmcblk0p2): mounted filesystem 9aae75e3-71dc-4cd8-81c2-e432641843a7 r/w with ordered data mode. Quota mode: none. [ 32.475002] loop0: detected capacity change from 0 to 1345184 [ 33.853058] EXT4-fs (mmcblk0p3): recovery complete [ 33.855690] EXT4-fs (mmcblk0p3): mounted filesystem 6fee81e4-7bf1-40e5-aaed-c3a77319b96c r/w with ordered data mode. Quota mode: none. [ 38.604651] systemd[1]: System time before build time, advancing clock. [ 39.739934] NET: Registered PF_INET6 protocol family [ 39.771907] Segment Routing with IPv6 [ 39.772050] In-situ OAM (IOAM) with IPv6 [ 40.403924] systemd[1]: systemd 252.36-1~deb12u1+rpi1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 40.404098] systemd[1]: Detected architecture arm. [ 40.433667] systemd[1]: Hostname set to . [ 50.494504] systemd[1]: Queued start job for default target graphical.target. [ 50.540588] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ 50.558835] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 50.576192] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. [ 50.594339] systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck. [ 50.598403] systemd[1]: Created slice user.slice - User and Session Slice. [ 50.600349] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 50.615689] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. [ 50.616573] systemd[1]: Expecting device dev-disk-by\x2duuid-0F99\x2dEC7C.device - /dev/disk/by-uuid/0F99-EC7C... [ 50.617183] systemd[1]: Expecting device dev-ttyAMA0.device - /dev/ttyAMA0... [ 50.618922] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ 50.621731] systemd[1]: Reached target slices.target - Slice Units. [ 50.633504] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ 50.773847] systemd[1]: Listening on rpcbind.socket - RPCbind Server Activation Socket. [ 50.779441] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. [ 50.781414] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 50.796909] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. [ 50.800324] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 50.814435] systemd[1]: Listening on systemd-journald.socket - Journal Socket. [ 50.824510] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 50.827708] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 50.831751] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages). [ 50.884653] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 50.924679] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 50.984381] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... [ 51.018465] systemd[1]: auth-rpcgss-module.service - Kernel Module supporting RPCSEC_GSS was skipped because of an unmet condition check (ConditionPathExists=/etc/krb5.keytab). [ 51.213657] systemd[1]: Started dynamicswap.service - dynamicswap service. [ 51.217819] systemd[1]: Reached target swap.target - Swaps. [ 51.380393] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock... [ 51.497925] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 51.605494] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... [ 51.718809] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... [ 51.862615] systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm... [ 52.023073] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... [ 52.147129] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... [ 52.315436] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... [ 52.569272] systemd[1]: Starting systemd-journald.service - Journal Service... [ 52.593054] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 52.775848] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 52.915027] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 53.065730] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 53.391932] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ 53.410197] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ 53.444658] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. [ 53.513319] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock. [ 53.543554] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 53.550939] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 53.629047] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. [ 53.921158] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. [ 53.974041] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. [ 53.980020] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 53.982437] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. [ 54.040086] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 54.113451] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. [ 54.119394] systemd[1]: modprobe@loop.service: Deactivated successfully. [ 54.131429] i2c_dev: i2c /dev entries driver [ 54.180824] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. [ 54.188527] systemd[1]: modprobe@drm.service: Deactivated successfully. [ 54.214120] systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm. [ 54.253258] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules. [ 54.283780] Adding 524224k swap on /swap/swapfile. Priority:-2 extents:15 across:15384572k SS [ 54.525347] systemd[1]: dynamicswap.service: Deactivated successfully. [ 54.573236] systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems. [ 54.694869] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... [ 54.823758] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... [ 54.824731] systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes). [ 54.826670] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [ 55.036592] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed... [ 55.176669] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. [ 55.275129] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables... [ 55.385995] systemd[1]: Starting systemd-sysusers.service - Create System Users... [ 55.936418] systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System. [ 55.940228] systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System. [ 56.033479] systemd[1]: Finished systemd-random-seed.service - Load/Save Random Seed. [ 56.037195] systemd[1]: first-boot-complete.target - First Boot Complete was skipped because of an unmet condition check (ConditionFirstBoot=yes). [ 56.402069] systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables. [ 56.803478] systemd[1]: Finished systemd-sysusers.service - Create System Users. [ 56.879417] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev... [ 57.124944] systemd[1]: Started systemd-journald.service - Journal Service. [ 59.505969] systemd-journald[266]: Received client request to flush runtime journal. [ 72.318524] rpi-gpiomem 20200000.gpiomem: window base 0x20200000 size 0x00001000 [ 72.322550] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 72.382432] rpi-gpiomem 20200000.gpiomem: initialised 1 regions as /dev/gpiomem [ 72.895958] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 72.899891] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 72.953815] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 72.957737] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 76.265491] mc: Linux media interface: v0.10 [ 90.779425] videodev: Linux video capture interface: v2.00 [ 95.405427] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 95.407434] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 95.407494] [vc_sm_connected_init]: start [ 95.653190] [vc_sm_connected_init]: installed successfully [ 96.266956] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 97.711615] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 97.782587] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 98.309345] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [ 98.331941] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [ 98.373159] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [ 98.503334] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [ 98.503441] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 98.503509] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 98.503556] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 98.503616] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 99.099074] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20 [ 99.220292] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21 [ 99.323085] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22 [ 99.327096] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 99.555851] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23 [ 99.555949] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 99.555996] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 99.556033] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 99.556066] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 99.584207] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [ 100.434346] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 100.434474] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 100.437520] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 100.439152] snd_bcm2835: unknown parameter 'enable_compat_alsa' ignored [ 100.565690] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 100.565814] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 100.733724] bcm2835-audio bcm2835-audio: card created with 4 channels [ 100.815175] bcm2835-audio bcm2835-audio: card created with 4 channels [ 100.903309] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 100.903458] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 101.233482] bcm2835-codec bcm2835-codec: Device registered as /dev/video18 [ 101.233605] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx [ 101.713293] bcm2835-codec bcm2835-codec: Device registered as /dev/video31 [ 101.713430] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image [ 113.238240] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 113.263239] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off [ 134.433139] usb 1-1.3.2: reset full-speed USB device number 5 using dwc_otg [ 134.553036] ieee80211 phy0: rt2x00_set_rt: Info - RT chipset 5390, rev 0502 detected [ 135.001640] ieee80211 phy0: rt2x00_set_rf: Info - RF chipset 5370 detected [ 135.006710] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht' [ 135.027415] usbcore: registered new interface driver rt2800usb [ 154.484580] warning: `iwconfig' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 154.603509] ieee80211 phy0: rt2x00lib_request_firmware: Info - Loading firmware file 'rt2870.bin' [ 154.622403] ieee80211 phy0: rt2x00lib_request_firmware: Info - Firmware detected - version: 0.36 [ 156.563098] usb 1-1.3.1: new full-speed USB device number 11 using dwc_otg [ 156.673839] usb 1-1.3.1: New USB device found, idVendor=25a7, idProduct=fa67, bcdDevice= 7.00 [ 156.673936] usb 1-1.3.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 156.673967] usb 1-1.3.1: Product: 2.4G Receiver [ 156.673990] usb 1-1.3.1: Manufacturer: CX [ 156.744740] input: CX 2.4G Receiver as /devices/platform/soc/20980000.usb/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.0/0003:25A7:FA67.0001/input/input0 [ 156.814206] hid-generic 0003:25A7:FA67.0001: input,hidraw0: USB HID v1.10 Keyboard [CX 2.4G Receiver] on usb-20980000.usb-1.3.1/input0 [ 156.842380] input: CX 2.4G Receiver Mouse as /devices/platform/soc/20980000.usb/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.1/0003:25A7:FA67.0002/input/input1 [ 156.867583] input: CX 2.4G Receiver as /devices/platform/soc/20980000.usb/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.1/0003:25A7:FA67.0002/input/input2 [ 156.871269] input: CX 2.4G Receiver Consumer Control as /devices/platform/soc/20980000.usb/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.1/0003:25A7:FA67.0002/input/input3 [ 156.927829] input: CX 2.4G Receiver System Control as /devices/platform/soc/20980000.usb/usb1/1-1/1-1.3/1-1.3.1/1-1.3.1:1.1/0003:25A7:FA67.0002/input/input4 [ 156.943157] hid-generic 0003:25A7:FA67.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [CX 2.4G Receiver] on usb-20980000.usb-1.3.1/input1