[ 0.000000] Booting Linux on physical CPU 0x0 [ 0.000000] Linux version 6.6.56-v7+ (dom@buildbot) (arm-linux-gnueabihf-gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #1803 SMP Thu Oct 10 14:08:55 BST 2024 [ 0.000000] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2 [ 0.000000] random: crng init done [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] Reserved memory: created CMA memory pool at 0x34000000, size 64 MiB [ 0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool [ 0.000000] OF: reserved mem: 0x34000000..0x37ffffff (65536 KiB) map reusable linux,cma [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000000000-0x0000000037ffffff] [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000000000-0x0000000037ffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000000000-0x0000000037ffffff] [ 0.000000] percpu: Embedded 18 pages/cpu s41812 r8192 d23724 u73728 [ 0.000000] pcpu-alloc: s41812 r8192 d23724 u73728 alloc=18*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [ 0.000000] Kernel command line: coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.enable_headphones=1 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=640 bcm2708_fb.fbheight=480 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3ec00000 vc_mem.mem_size=0x40000000 splash plymouth.ignore-serial-consoles dwc_otg.fiq_enable=1 dwc_otg.fiq_fsm_enable=1 dwc_otg.fiq_fsm_mask=0xF dwc_otg.nak_holdoff=1 quiet console=ttyS0,115200 console=tty1 imgpart=UUID=ed280c2b-b4b4-43e6-87d7-b67377eacab2 imgfile=/volumio_current.sqsh bootpart=UUID=FCA2-3F9A datapart=UUID=0367e456-8c2f-458a-8465-47f124ad9fdd uuidconfig=cmdline.txt pcie_aspm=off pci=pcie_bus_safe rootwait bootdelay=7 logo.nologo vt.global_cursor_default=0 net.ifnames=0 snd-bcm2835.enable_compat_alsa= snd_bcm2835.enable_hdmi=1 snd_bcm2835.enable_headphones=1 loglevel=0 nodebug use_kmsg=no [ 0.000000] Unknown kernel command line parameters "splash nodebug imgpart=UUID=ed280c2b-b4b4-43e6-87d7-b67377eacab2 imgfile=/volumio_current.sqsh bootpart=UUID=FCA2-3F9A datapart=UUID=0367e456-8c2f-458a-8465-47f124ad9fdd uuidconfig=cmdline.txt pcie_aspm=off pci=pcie_bus_safe bootdelay=7 use_kmsg=no", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 227360 [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 796008K/917504K available (11264K kernel code, 1476K rwdata, 3256K rodata, 1024K init, 606K bss, 55960K reserved, 65536K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] ftrace: allocating 36450 entries in 107 pages [ 0.000000] ftrace: allocated 107 pages with 5 groups [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] Rude variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [ 0.000001] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [ 0.000019] Switching to timer-based delay loop, resolution 52ns [ 0.000409] Console: colour dummy device 80x30 [ 0.000426] printk: console [tty1] enabled [ 0.000532] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [ 0.000554] CPU: Testing write buffer coherency: ok [ 0.000606] pid_max: default: 32768 minimum: 301 [ 0.000719] LSM: initializing lsm=capability,integrity [ 0.000910] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.000933] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.001962] cgroup: Disabling memory control group subsystem [ 0.002521] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.003519] RCU Tasks Rude: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.003618] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.003770] Setting up static identity map for 0x100000 - 0x10003c [ 0.003918] rcu: Hierarchical SRCU implementation. [ 0.003927] rcu: Max phase no-delay instances is 1000. [ 0.004611] smp: Bringing up secondary CPUs ... [ 0.005512] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.006413] CPU2: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.007250] CPU3: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.007347] smp: Brought up 1 node, 4 CPUs [ 0.007369] SMP: Total of 4 processors activated (153.60 BogoMIPS). [ 0.007383] CPU: All CPU(s) started in HYP mode. [ 0.007389] CPU: Virtualization extensions available. [ 0.008531] devtmpfs: initialized [ 0.021651] VFP support v0.3: implementor 41 architecture 3 part 40 variant 3 rev 4 [ 0.021860] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.021888] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.024303] pinctrl core: initialized pinctrl subsystem [ 0.025309] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.027799] DMA: preallocated 1024 KiB pool for atomic coherent allocations [ 0.033276] audit: initializing netlink subsys (disabled) [ 0.033529] audit: type=2000 audit(0.030:1): state=initialized audit_enabled=0 res=1 [ 0.034099] thermal_sys: Registered thermal governor 'step_wise' [ 0.034661] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.034678] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.034996] Serial: AMBA PL011 UART driver [ 0.039345] bcm2835-mbox 3f00b880.mailbox: mailbox enabled [ 0.060032] raspberrypi-firmware soc:firmware: Attached to firmware from 2024-09-13T16:00:01, variant start [ 0.070046] raspberrypi-firmware soc:firmware: Firmware hash is ddfba3e3c234500025b545512b4b214f28e453e9 [ 0.084520] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.087070] bcm2835-dma 3f007000.dma-controller: DMA legacy API manager, dmachans=0x1 [ 0.088738] SCSI subsystem initialized [ 0.088974] usbcore: registered new interface driver usbfs [ 0.089022] usbcore: registered new interface driver hub [ 0.089074] usbcore: registered new device driver usb [ 0.089472] pps_core: LinuxPPS API ver. 1 registered [ 0.089482] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.089507] PTP clock support registered [ 0.091615] clocksource: Switched to clocksource arch_sys_counter [ 0.092054] VFS: Disk quotas dquot_6.6.0 [ 0.092108] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.092234] FS-Cache: Loaded [ 0.096558] CacheFiles: Loaded [ 0.106216] NET: Registered PF_INET protocol family [ 0.106548] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.108922] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 0.108958] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.108978] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 0.109092] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 0.109421] TCP: Hash tables configured (established 8192 bind 8192) [ 0.109559] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.109613] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.109807] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.110291] RPC: Registered named UNIX socket transport module. [ 0.110303] RPC: Registered udp transport module. [ 0.110310] RPC: Registered tcp transport module. [ 0.110318] RPC: Registered tcp-with-tls transport module. [ 0.110325] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.111741] Trying to unpack rootfs image as initramfs... [ 0.132901] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 7 counters available [ 1.428976] Freeing initrd memory: 28068K [ 2.059030] Initialise system trusted keyrings [ 2.059652] workingset: timestamp_bits=14 max_order=18 bucket_order=4 [ 2.059723] zbud: loaded [ 2.060477] NFS: Registering the id_resolver key type [ 2.060512] Key type id_resolver registered [ 2.060521] Key type id_legacy registered [ 2.060552] nfs4filelayout_init: NFSv4 File Layout Driver Registering... [ 2.060562] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... [ 2.061289] Key type asymmetric registered [ 2.061302] Asymmetric key parser 'x509' registered [ 2.061377] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 2.061390] io scheduler mq-deadline registered [ 2.061400] io scheduler kyber registered [ 2.061452] io scheduler bfq registered [ 2.063392] pinctrl-bcm2835 3f200000.gpio: GPIO_OUT persistence: yes [ 2.066135] bcm2708_fb soc:fb: FB found 1 display(s) [ 2.072524] Console: switching to colour frame buffer device 80x30 [ 2.076627] bcm2708_fb soc:fb: Registered framebuffer for display 0, size 640x480 [ 2.080671] bcm2835-rng 3f104000.rng: hwrng registered [ 2.080982] vc-mem: phys_addr:0x00000000 mem_base=0x3ec00000 mem_size:0x40000000(1024 MiB) [ 2.092683] brd: module loaded [ 2.099978] loop: module loaded [ 2.100580] Loading iSCSI transport class v2.0-870. [ 2.102115] usbcore: registered new interface driver lan78xx [ 2.102163] usbcore: registered new interface driver smsc95xx [ 2.102175] dwc_otg: version 3.00a 10-AUG-2012 (platform bus) [ 2.830233] Core Release: 2.80a [ 2.830250] Setting default values for core params [ 2.830275] Finished setting default values for core params [ 3.030536] Using Buffer DMA mode [ 3.030545] Periodic Transfer Interrupt Enhancement - disabled [ 3.030553] Multiprocessor Interrupt Enhancement - disabled [ 3.030561] OTG VER PARAM: 0, OTG VER FLAG: 0 [ 3.030596] Dedicated Tx FIFOs mode [ 3.031149] WARN::dwc_otg_hcd_init:1070: FIQ DMA bounce buffers: virt = b4104000 dma = 0xf4104000 len=9024 [ 3.031188] FIQ FSM acceleration enabled for : Non-periodic Split Transactions Periodic Split Transactions High-Speed Isochronous Endpoints Interrupt/Control Split Transaction hack enabled [ 3.031202] dwc_otg: Microframe scheduler enabled [ 3.031312] WARN::hcd_init_fiq:457: FIQ on core 1 [ 3.031332] WARN::hcd_init_fiq:458: FIQ ASM at 80887df0 length 36 [ 3.031353] WARN::hcd_init_fiq:496: MPHI regs_base at b8810000 [ 3.031376] dwc_otg 3f980000.usb: DWC OTG Controller [ 3.031425] dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1 [ 3.031464] dwc_otg 3f980000.usb: irq 89, io mem 0x00000000 [ 3.031518] Init: Port Power? op_state=1 [ 3.031526] Init: Power Port (0) [ 3.031765] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.06 [ 3.031784] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.031799] usb usb1: Product: DWC OTG Controller [ 3.031810] usb usb1: Manufacturer: Linux 6.6.56-v7+ dwc_otg_hcd [ 3.031822] usb usb1: SerialNumber: 3f980000.usb [ 3.032467] hub 1-0:1.0: USB hub found [ 3.032518] hub 1-0:1.0: 1 port detected [ 3.033127] dwc_otg: FIQ enabled [ 3.033137] dwc_otg: NAK holdoff enabled [ 3.033144] dwc_otg: FIQ split-transaction FSM enabled [ 3.033159] Module dwc_common_port init [ 3.033431] usbcore: registered new interface driver usb-storage [ 3.033658] mousedev: PS/2 mouse device common for all mice [ 3.035807] sdhci: Secure Digital Host Controller Interface driver [ 3.035818] sdhci: Copyright(c) Pierre Ossman [ 3.036022] sdhci-pltfm: SDHCI platform and OF driver helper [ 3.037833] ledtrig-cpu: registered to indicate activity on CPUs [ 3.038242] hid: raw HID events driver (C) Jiri Kosina [ 3.038353] usbcore: registered new interface driver usbhid [ 3.038363] usbhid: USB HID core driver [ 3.042970] Initializing XFRM netlink socket [ 3.043025] NET: Registered PF_PACKET protocol family [ 3.043133] Key type dns_resolver registered [ 3.043658] Registering SWP/SWPB emulation handler [ 3.075257] registered taskstats version 1 [ 3.075488] Loading compiled-in X.509 certificates [ 3.087802] Key type .fscrypt registered [ 3.087820] Key type fscrypt-provisioning registered [ 3.096276] uart-pl011 3f201000.serial: cts_event_workaround enabled [ 3.096704] 3f201000.serial: ttyAMA1 at MMIO 0x3f201000 (irq = 114, base_baud = 0) is a PL011 rev2 [ 3.097000] serial serial0: tty port ttyAMA1 registered [ 3.098755] bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer [ 3.099013] bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver [ 3.100197] mmc-bcm2835 3f300000.mmcnr: mmc_debug:0 mmc_debug2:0 [ 3.100214] mmc-bcm2835 3f300000.mmcnr: DMA channel allocated [ 3.125696] sdhost: log_buf @ c233fd6f (f4107000) [ 3.162904] Indeed it is in host mode hprt0 = 00021501 [ 3.185627] mmc0: sdhost-bcm2835 loaded - DMA enabled (>1) [ 3.187748] of_cfs_init [ 3.187876] of_cfs_init: OK [ 3.188250] clk: Disabling unused clocks [ 3.224799] Freeing unused kernel image (initmem) memory: 1024K [ 3.225388] Run /init as init process [ 3.225398] with arguments: [ 3.225404] /init [ 3.225410] splash [ 3.225416] nodebug [ 3.225423] with environment: [ 3.225429] HOME=/ [ 3.225435] TERM=linux [ 3.225441] imgpart=UUID=ed280c2b-b4b4-43e6-87d7-b67377eacab2 [ 3.225449] imgfile=/volumio_current.sqsh [ 3.225455] bootpart=UUID=FCA2-3F9A [ 3.225462] datapart=UUID=0367e456-8c2f-458a-8465-47f124ad9fdd [ 3.225470] uuidconfig=cmdline.txt [ 3.225477] pcie_aspm=off [ 3.225484] pci=pcie_bus_safe [ 3.225490] bootdelay=7 [ 3.225497] use_kmsg=no [ 3.248357] mmc0: host does not support reading read-only switch, assuming write-enable [ 3.254500] mmc0: Host Software Queue enabled [ 3.254544] mmc0: new high speed SDXC card at address aaaa [ 3.255478] mmcblk0: mmc0:aaaa SC64G 59.5 GiB [ 3.258890] mmcblk0: p1 p2 p3 [ 3.259842] mmcblk0: mmc0:aaaa SC64G 59.5 GiB (quirks 0x00004000) [ 3.324979] mmc1: new high speed SDIO card at address 0001 [ 3.371705] usb 1-1: new high-speed USB device number 2 using dwc_otg [ 3.371939] Indeed it is in host mode hprt0 = 00001101 [ 3.611997] usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00 [ 3.612034] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 3.614049] hub 1-1:1.0: USB hub found [ 3.614197] hub 1-1:1.0: 5 ports detected [ 3.932139] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [ 4.066532] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00 [ 4.066570] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 4.079222] smsc95xx v2.0.0 [ 4.254625] SMSC LAN8700 usb-001:003:01: attached PHY driver (mii_bus:phy_addr=usb-001:003:01, irq=199) [ 4.255484] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:ce:2b:a2 [ 4.274087] fuse: init (API version 7.39) [ 4.434571] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 4.458003] usbcore: registered new interface driver uas [ 12.031850] FAT-fs (mmcblk0p1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 12.116278] EXT4-fs (mmcblk0p2): recovery complete [ 12.117454] EXT4-fs (mmcblk0p2): mounted filesystem ed280c2b-b4b4-43e6-87d7-b67377eacab2 r/w with ordered data mode. Quota mode: none. [ 14.417008] loop0: detected capacity change from 0 to 994880 [ 14.726073] EXT4-fs (mmcblk0p3): recovery complete [ 14.729729] EXT4-fs (mmcblk0p3): mounted filesystem 0367e456-8c2f-458a-8465-47f124ad9fdd r/w with ordered data mode. Quota mode: none. [ 16.003811] systemd[1]: System time before build time, advancing clock. [ 16.259407] NET: Registered PF_INET6 protocol family [ 16.260993] Segment Routing with IPv6 [ 16.261050] In-situ OAM (IOAM) with IPv6 [ 16.451308] systemd[1]: systemd 241 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid) [ 16.452226] systemd[1]: Detected architecture arm. [ 16.507972] systemd[1]: Set hostname to . [ 17.352823] systemd[1]: /lib/systemd/system/winbind.service:8: PIDFile= references path below legacy directory /var/run/, updating /var/run/samba/winbindd.pid \xe2\x86\x92 /run/samba/winbindd.pid; please update the unit file accordingly. [ 17.662538] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point. [ 17.662877] systemd[1]: Reached target System Time Synchronized. [ 17.664337] systemd[1]: Listening on Journal Socket. [ 17.732580] systemd[1]: Mounting POSIX Message Queue File System... [ 17.744280] systemd[1]: Starting Restore / save the current clock... [ 17.752257] systemd[1]: Mounting RPC Pipe File System... [ 18.006546] i2c_dev: i2c /dev entries driver [ 18.712082] systemd-journald[308]: Received request to flush runtime journal from PID 1 [ 19.175811] mc: Linux media interface: v0.10 [ 19.222502] vc_sm_cma: module is from the staging directory, the quality is unknown, you have been warned. [ 19.224022] bcm2835_vc_sm_cma_probe: Videocore shared memory driver [ 19.224054] [vc_sm_connected_init]: start [ 19.230494] rpi-gpiomem 3f200000.gpiomem: window base 0x3f200000 size 0x00001000 [ 19.249397] [vc_sm_connected_init]: installed successfully [ 19.249426] rpi-gpiomem 3f200000.gpiomem: initialised 1 regions as /dev/gpiomem [ 19.553076] videodev: Linux video capture interface: v2.00 [ 19.651120] bcm2835_mmal_vchiq: module is from the staging directory, the quality is unknown, you have been warned. [ 19.886919] bcm2835_codec: module is from the staging directory, the quality is unknown, you have been warned. [ 19.891992] bcm2835_v4l2: module is from the staging directory, the quality is unknown, you have been warned. [ 19.931330] bcm2835-codec bcm2835-codec: Device registered as /dev/video10 [ 19.931387] bcm2835-codec bcm2835-codec: Loaded V4L2 decode [ 19.934609] bcm2835-codec bcm2835-codec: Device registered as /dev/video11 [ 19.934665] bcm2835-codec bcm2835-codec: Loaded V4L2 encode [ 19.940757] bcm2835-codec bcm2835-codec: Device registered as /dev/video12 [ 19.940811] bcm2835-codec bcm2835-codec: Loaded V4L2 isp [ 19.950624] bcm2835-codec bcm2835-codec: Device registered as /dev/video18 [ 19.950784] bcm2835-codec bcm2835-codec: Loaded V4L2 image_fx [ 19.960520] bcm2835-codec bcm2835-codec: Device registered as /dev/video31 [ 19.960573] bcm2835-codec bcm2835-codec: Loaded V4L2 encode_image [ 19.979434] bcm2835_isp: module is from the staging directory, the quality is unknown, you have been warned. [ 20.121833] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video13 [ 20.122439] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video14 [ 20.122901] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video15 [ 20.123249] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video16 [ 20.123283] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 20.123303] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 20.123319] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 20.123334] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 20.126899] bcm2835-isp bcm2835-isp: Device node output[0] registered as /dev/video20 [ 20.127378] bcm2835-isp bcm2835-isp: Device node capture[0] registered as /dev/video21 [ 20.127793] bcm2835-isp bcm2835-isp: Device node capture[1] registered as /dev/video22 [ 20.128109] bcm2835-isp bcm2835-isp: Device node stats[2] registered as /dev/video23 [ 20.128139] bcm2835-isp bcm2835-isp: Register output node 0 with media controller [ 20.128160] bcm2835-isp bcm2835-isp: Register capture node 1 with media controller [ 20.128176] bcm2835-isp bcm2835-isp: Register capture node 2 with media controller [ 20.128191] bcm2835-isp bcm2835-isp: Register capture node 3 with media controller [ 20.128407] bcm2835-isp bcm2835-isp: Loaded V4L2 bcm2835-isp [ 20.261200] snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned. [ 20.327973] Bluetooth: Core ver 2.22 [ 20.328114] NET: Registered PF_BLUETOOTH protocol family [ 20.328124] Bluetooth: HCI device and connection manager initialized [ 20.328151] Bluetooth: HCI socket layer initialized [ 20.328167] Bluetooth: L2CAP socket layer initialized [ 20.328196] Bluetooth: SCO socket layer initialized [ 20.342539] snd_bcm2835: unknown parameter 'enable_compat_alsa' ignored [ 20.435715] Bluetooth: HCI UART driver ver 2.3 [ 20.435749] Bluetooth: HCI UART protocol H4 registered [ 20.435863] Bluetooth: HCI UART protocol Three-wire (H5) registered [ 20.436397] Bluetooth: HCI UART protocol Broadcom registered [ 20.437156] hci_uart_bcm serial0-0: supply vbat not found, using dummy regulator [ 20.437376] hci_uart_bcm serial0-0: supply vddio not found, using dummy regulator [ 20.482899] bcm2835_audio bcm2835_audio: card created with 4 channels [ 20.522698] bcm2835_audio bcm2835_audio: card created with 4 channels [ 20.551997] uart-pl011 3f201000.serial: no DMA platform data [ 20.725266] pcm512x 1-004d: supply AVDD not found, using dummy regulator [ 20.725542] pcm512x 1-004d: supply DVDD not found, using dummy regulator [ 20.725612] pcm512x 1-004d: supply CPVDD not found, using dummy regulator [ 20.731124] pcm512x 1-004c: supply AVDD not found, using dummy regulator [ 20.731339] pcm512x 1-004c: supply DVDD not found, using dummy regulator [ 20.731403] pcm512x 1-004c: supply CPVDD not found, using dummy regulator [ 20.806510] Bluetooth: hci0: BCM: chip id 94 [ 20.807092] Bluetooth: hci0: BCM: features 0x2e [ 20.815745] Bluetooth: hci0: BCM43430A1 [ 20.815794] Bluetooth: hci0: BCM43430A1 (001.002.009) build 0000 [ 20.828985] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 20.834939] Bluetooth: hci0: BCM43430A1 'brcm/BCM43430A1.hcd' Patch [ 20.860599] Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf' [ 20.863438] Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328' [ 20.866095] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 20.868663] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 21.247157] brcmfmac: F1 signature read @0x18000000=0x1541a9a6 [ 21.253054] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43430-sdio for chip BCM43430/1 [ 21.256952] usbcore: registered new interface driver brcmfmac [ 21.608973] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2) [ 21.610226] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM43430/1 wl0: Jul 19 2021 03:24:18 version 7.45.98 (TOB) (56df937 CY) FWID 01-8e14b897 [ 21.753322] Bluetooth: hci0: BCM: features 0x2e [ 21.756640] Bluetooth: hci0: BCM43438A1 37.4MHz Raspberry Pi 3-0141 [ 21.756706] Bluetooth: hci0: BCM43430A1 (001.002.009) build 0508 [ 22.584311] alsactl[502]: memfd_create() called without MFD_EXEC or MFD_NOEXEC_SEAL set [ 23.248761] warning: `iwconfig' uses wireless extensions which will stop working for Wi-Fi 7 hardware; use nl80211 [ 23.470975] 8021q: 802.1Q VLAN Support v1.8 [ 23.657683] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled [ 24.787269] smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup [ 24.801562] smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off [ 27.239372] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 27.239396] Bluetooth: BNEP filters: protocol multicast [ 27.239414] Bluetooth: BNEP socket layer initialized [ 27.248889] Bluetooth: MGMT ver 1.22 [ 29.089798] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled [ 30.570565] brcmfmac: brcmf_cfg80211_set_power_mgmt: power save disabled