Hi,
Just got a TP-Link AC1300 MU-MIMO USB adapter, which I can setup and connect to my wireless network. However after every reboot the connections is lost. No clue why?
Version: Volumio V3.378-x68
Log: http://logs.volumio.org/volumio/R9tGCD6.html
lspci:
volumio@volumiox86:~$ lspci
00:00.0 Host bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SoC Transaction Register (rev 36)
00:02.0 VGA compatible controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Configuration Registers (rev 36)
00:0b.0 Signal processing controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Power Management Controller (rev 36)
00:11.0 SD Host controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series SDIO Controller (rev 36)
00:14.0 USB controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series USB xHCI Controller (rev 36)
00:1a.0 Encryption controller: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series Trusted Execution Engine (rev 36)
00:1c.0 PCI bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Express Port #1 (rev 36)
00:1f.0 ISA bridge: Intel Corporation Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCU (rev 36)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 15)
volumio@volumiox86:~$
inxi -Fxxxz:
volumio@volumiox86:~$ inxi -Fxxxz
System: Host: volumiox86 Kernel: 5.10.139-volumio x86_64 bits: 64 compiler: N/A Console: tty 0 dm: N/A
Distro: Debian GNU/Linux 10 (buster)
Machine: Type: Desktop System: Dell product: Wyse 3040 Thin Client v: N/A serial: <filter> Chassis: type: 3 serial: <filter>
Mobo: Dell model: Cherry Trail CR v: A00 serial: <filter> UEFI: Dell v: 1.2.4 date: 01/18/2018
CPU: Topology: Quad Core model: Intel Atom x5-Z8350 bits: 64 type: MCP arch: Airmont rev: 4 L2 cache: 1024 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 11520
Speed: 609 MHz min/max: 480/1920 MHz Core speeds (MHz): 1: 525 2: 872 3: 848 4: 888
Graphics: Device-1: Intel Atom/Celeron/Pentium Processor x5-E8000/J3xxx/N3xxx Series PCI Configuration Registers vendor: Dell
driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:22b0
Display: tty server: X.org 1.20.4 driver: none unloaded: fbdev,modesetting,vesa tty: 143x24
Message: Unable to show advanced data. Required tool glxinfo missing.
Audio: Device-1: cht-bsw-rt5672 driver: cht-bsw-rt5672 message: bus/chip ids unavailable
Device-2: Intel HDMI/DP LPE Audio driver: HdmiLpeAudio message: bus/chip ids unavailable
Sound Server: ALSA v: k5.10.139-volumio
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet vendor: Dell driver: r8169 v: kernel port: e000
bus ID: 01:00.0 chip ID: 10ec:8168
IF: eth0 state: up speed: 1000 Mbps duplex: full mac: <filter>
Device-2: TP-Link type: USB driver: rtl88x2bu bus ID: 1-4:3 chip ID: 2357:012d serial: <filter>
IF: wlan0 state: up mac: <filter>
Drives: Local Storage: total: 7.28 GiB used: 3.10 GiB (42.5%)
ID-1: /dev/mmcblk1 model: H8G4a size: 7.28 GiB serial: <filter> rev: 0x8 scheme: GPT
Partition: ID-1: / size: 3.61 GiB used: 2.21 GiB (61.3%) fs: overlay source: ERR-102
ID-2: /boot size: 168.4 MiB used: 61.2 MiB (36.3%) fs: vfat dev: /dev/mmcblk1p1
Sensors: System Temperatures: cpu: 43.0 C mobo: N/A
Fan Speeds (RPM): N/A
Info: Processes: 165 Uptime: 4m Memory: 1.86 GiB used: 365.9 MiB (19.2%) Init: systemd v: 241 runlevel: 5 default: 2
Compilers: gcc: 8.3.0 alt: 8 Shell: bash v: 5.0.3 running in: tty 0 (SSH) inxi: 3.0.32
volumio@volumiox86:~$
volumio@volumiox86:~$ sudo lshw -C network
*-network
description: Ethernet interface
product: RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
vendor: Realtek Semiconductor Co., Ltd.
physical id: 0
bus info: pci@0000:01:00.0
logical name: eth0
version: 15
serial: 54:48:10:e8:2c:0a
size: 1Gbit/s
capacity: 1Gbit/s
width: 64 bits
clock: 33MHz
capabilities: pm msi pciexpress msix bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation
configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=5.10.139-volumio duplex=full firmware=rtl8168h-2_0.0.2 02/26/15 ip=192.168.1.199 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s
resources: irq:16 ioport:e000(size=256) memory:91404000-91404fff memory:91400000-91403fff
*-network
description: Wireless interface
physical id: 1
bus info: usb@1:4
logical name: wlan0
serial: 1c:61:b4:7b:45:70
capabilities: ethernet physical wireless
configuration: broadcast=yes driver=rtl88x2bu driverversion=5.10.139-volumio ip=192.168.1.52 multicast=yes wireless=IEEE 802.11AC
volumio@volumiox86:~$
Currently solved by doing a factory reset.