Hello,
Intel Broadwell.
I have trouble making audio over HDMI work.
In Settings → playback options → output device there are two option, “HDA Intel HDMI” and “Analog Out”.
I want HDMI audio playback, so I select the first option, but no sound comes out.
‘speaker-test -D hw:0,3 -c 2’ works fine.
System version: 3.251 released: Thu 31 Mar 2022 03:20:44 PM CEST
Link to log:
http://logs.volumio.org/volumio/lQ1PWRB.html
volumio@stue:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: HDMI [HDA Intel HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: HDMI [HDA Intel HDMI], device 10: HDMI 4 [HDMI 4]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 0: ALC283 Analog [ALC283 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
volumio@stue:~$ lspci
00:00.0 Host bridge: Intel Corporation Broadwell-U Host Bridge -OPI (rev 09)
00:02.0 VGA compatible controller: Intel Corporation HD Graphics (rev 09)
00:03.0 Audio device: Intel Corporation Broadwell-U Audio Controller (rev 09)
00:14.0 USB controller: Intel Corporation Wildcat Point-LP USB xHCI Controller (rev 03)
00:16.0 Communication controller: Intel Corporation Wildcat Point-LP MEI Controller #1 (rev 03)
00:1b.0 Audio device: Intel Corporation Wildcat Point-LP High Definition Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #3 (rev e3)
00:1c.1 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #4 (rev e3)
00:1c.2 PCI bridge: Intel Corporation Wildcat Point-LP PCI Express Root Port #5 (rev e3)
00:1f.0 ISA bridge: Intel Corporation Wildcat Point-LP LPC Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation Wildcat Point-LP SATA Controller [AHCI Mode] (rev 03)
00:1f.3 SMBus: Intel Corporation Wildcat Point-LP SMBus Controller (rev 03)
00:1f.6 Signal processing controller: Intel Corporation Wildcat Point-LP Thermal Management Controller (rev 03)
01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 0c)
02:00.0 Network controller: Intel Corporation Wireless 7260 (rev bb)
volumio@stue:~$ inxi -Fxxxz
perl: warning: Setting locale failed.
perl: warning: Please check that your locale settings:
LANGUAGE = (unset),
LC_ALL = (unset),
LANG = “da_DK.UTF-8”
are supported and installed on your system.
perl: warning: Falling back to the standard locale (“C”).
System: Host: stue Kernel: 5.10.95-volumio x86_64 bits: 64 compiler: N/A Console: tty 0 dm: N/A
Distro: Debian GNU/Linux 10 (buster)
Machine: Type: Desktop Mobo: GOOGLE model: Guado v: 1.0 serial: UEFI: coreboot v: MrChromebox-4.16 date: 04/09/2022
CPU: Topology: Dual Core model: Intel Celeron 3215U bits: 64 type: MCP arch: Broadwell rev: 4 L2 cache: 2048 KiB
flags: lm nx pae sse sse2 sse3 sse4_1 sse4_2 ssse3 vmx bogomips: 6783
Speed: 1696 MHz min/max: 500/1700 MHz Core speeds (MHz): 1: 1696 2: 1696
Graphics: Device-1: Intel HD Graphics driver: i915 v: kernel bus ID: 00:02.0 chip ID: 8086:1606
Display: tty server: X.org 1.20.4 driver: modesetting unloaded: fbdev,vesa tty: 190x52
Message: Unable to show advanced data. Required tool glxinfo missing.
Audio: Device-1: Intel Broadwell-U Audio driver: snd_hda_intel v: kernel bus ID: 00:03.0 chip ID: 8086:160c
Device-2: Intel Wildcat Point-LP High Definition Audio driver: snd_hda_intel v: kernel bus ID: 00:1b.0
chip ID: 8086:9ca0
Sound Server: ALSA v: k5.10.95-volumio
Network: Device-1: Realtek RTL8111/8168/8411 PCI Express Gigabit Ethernet driver: r8169 v: kernel port: 2000 bus ID: 01:00.0
chip ID: 10ec:8168
IF: eth0 state: up speed: 1000 Mbps duplex: full mac:
Device-2: Intel Wireless 7260 driver: iwlwifi v: kernel port: 2000 bus ID: 02:00.0 chip ID: 8086:08b1
IF: wlan0 state: down mac:
Drives: Local Storage: total: 22.12 GiB used: 1.40 GiB (6.3%)
ID-1: /dev/sda vendor: Transcend model: TS16GMTS400 size: 14.91 GiB speed: 6.0 Gb/s serial: rev: 5O1
scheme: GPT
ID-2: /dev/sdb type: USB vendor: Kingston model: DataTraveler 3.0 size: 7.20 GiB serial: scheme: GPT
Partition: ID-1: / size: 3.55 GiB used: 543.5 MiB (15.0%) fs: overlay source: ERR-102
ID-2: /boot size: 170.8 MiB used: 60.2 MiB (35.2%) fs: vfat dev: /dev/sdb1
Sensors: Missing: Required tool sensors not installed. Check --recommends
Info: Processes: 142 Uptime: 13m Memory: 7.65 GiB used: 461.9 MiB (5.9%) Init: systemd v: 241 runlevel: 5 default: 2
Compilers: gcc: 8.3.0 alt: 8 Shell: bash v: 5.0.3 running in: tty 0 (SSH) inxi: 3.0.32
Regards
Søren