# volumio-2.587-2019-06-11-pi - Configure Static IP  eth0: ??

**URL:** <https://community.volumio.com/t/volumio-2-587-2019-06-11-pi-configure-static-ip-eth0/10617>\
**Category:** Help\
**Created:** [June 26, 2019, 12:47am UTC](https://community.volumio.com/t/volumio-2-587-2019-06-11-pi-configure-static-ip-eth0/10617 "2019-06-26T00:47:53Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![FredTheFrog](https://community.volumio.com/letter_avatar_proxy/v4/letter/f/4491bb/32.png) [@FredTheFrog](https://community.volumio.com/u/FredTheFrog)\
**Post date:** [June 26, 2019, 12:47am UTC](https://community.volumio.com/t/volumio-2-587-2019-06-11-pi-configure-static-ip-eth0/10617/1 "2019-06-26T00:47:53Z")

</div>

RPi 3B+, InnoMaker amp hat, freshly written SD card - Setting static IP using the Volumio Network GUI results in a Pi that is NOT accessible from the network. This would NOT be such a problem normally, but this RPi is connected behind a network media bridge. I cannot rely on the correct MAC address reaching the DHCP server to assign a reserved IP address. ☹

Please advise best command-line Linux method to successfully configure eth0: as static IP. I cannot determine which particular variant/release of Linux is running. All I know is, it’s kernel version 4.x, which is great. Thank you in advance for any helpful advice you might be able to supply!!

---

<div class="post-metadata">

**Author:** ![DOLIVut](https://community.volumio.com/user_avatar/community.volumio.com/dolivut/32/904_2.png) [@DOLIVut](https://community.volumio.com/u/DOLIVut)\
**Post date:** [June 26, 2019, 4:43am UTC](https://community.volumio.com/t/volumio-2-587-2019-06-11-pi-configure-static-ip-eth0/10617/2 "2019-06-26T04:43:53Z")

</div>

If you live in the Irvine area, contact Song Plastic Surgery. Kyle Song, MD, specializes in providing highly effective, youth-enhancing chemical peels.  
[chemical peel aftercare instructions](http://chemicalpeel.in/detailed-chemical-peel-aftercare-instructions)