# Room correction using your iPhone and HouseCurve

**URL:** <https://community.volumio.com/t/room-correction-using-your-iphone-and-housecurve/60242>\
**Category:** Plugins\
**Created:** [February 12, 2023, 5:36pm UTC](https://community.volumio.com/t/room-correction-using-your-iphone-and-housecurve/60242 "2023-02-12T17:36:42Z")\
**Posts on this page:** 20\
**Page:** 2

<div class="post-metadata">

**Author:** ![CENK\_ISIL](https://community.volumio.com/user_avatar/community.volumio.com/cenk_isil/32/11192_2.png) [@CENK\_ISIL](https://community.volumio.com/u/CENK_ISIL)\
**Post date:** [June 11, 2023, 7:10pm UTC](https://community.volumio.com/t/room-correction-using-your-iphone-and-housecurve/60242/21 "2023-06-11T19:10:25Z")

</div>

[/uploads/default/original/3X/9/e/9ed0ac8d598d33d63ec08dd474654f644488b189.wav](https://community.volumio.com/uploads/default/original/3X/9/e/9ed0ac8d598d33d63ec08dd474654f644488b189.wav)  
[/uploads/default/original/3X/2/9/29ef5e0d6101190ee3345e9c9bae7dd21f683680.wav](https://community.volumio.com/uploads/default/original/3X/2/9/29ef5e0d6101190ee3345e9c9bae7dd21f683680.wav)

---

<div class="post-metadata">

**Author:** ![CENK\_ISIL](https://community.volumio.com/user_avatar/community.volumio.com/cenk_isil/32/11192_2.png) [@CENK\_ISIL](https://community.volumio.com/u/CENK_ISIL)\
**Post date:** [June 11, 2023, 7:10pm UTC](https://community.volumio.com/t/room-correction-using-your-iphone-and-housecurve/60242/22 "2023-06-11T19:10:41Z")

</div>

Thank you 🙏

---

<div class="post-metadata">

**Author:** ![balbuze](https://community.volumio.com/user_avatar/community.volumio.com/balbuze/32/30223_2.png) [@balbuze](https://community.volumio.com/u/balbuze)\
**Post date:** [June 11, 2023, 7:13pm UTC](https://community.volumio.com/t/room-correction-using-your-iphone-and-housecurve/60242/23 "2023-06-11T19:13:08Z")

</div>

Thankd! I’ll have a look tomorrow.  
But how does it sound for you?

---

<div class="post-metadata">

**Author:** ![CENK\_ISIL](https://community.volumio.com/user_avatar/community.volumio.com/cenk_isil/32/11192_2.png) [@CENK\_ISIL](https://community.volumio.com/u/CENK_ISIL)\
**Post date:** [June 11, 2023, 8:33pm UTC](https://community.volumio.com/t/room-correction-using-your-iphone-and-housecurve/60242/24 "2023-06-11T20:33:41Z")

</div>

It sounds much better than without. Of course I can always redo HouseCurve procedures again separating L and R. Laziness and lack of a mic stand are my only obstacles:) I’m not sure if the mic position being slightly different b/w L and R measurements is a problem. Also bass modes are cumulative. no?

---

<div class="post-metadata">

**Author:** ![balbuze](https://community.volumio.com/user_avatar/community.volumio.com/balbuze/32/30223_2.png) [@balbuze](https://community.volumio.com/u/balbuze)\
**Post date:** [June 12, 2023, 4:12pm UTC](https://community.volumio.com/t/room-correction-using-your-iphone-and-housecurve/60242/25 "2023-06-12T16:12:34Z")

</div>

hi!  
Yes, your files are mono, so the same correction for L and R. If the room and speaker placement are symmetrical, this is not a problem…

---

<div class="post-metadata">

**Author:** ![CENK\_ISIL](https://community.volumio.com/user_avatar/community.volumio.com/cenk_isil/32/11192_2.png) [@CENK\_ISIL](https://community.volumio.com/u/CENK_ISIL)\
**Post date:** [June 12, 2023, 5:21pm UTC](https://community.volumio.com/t/room-correction-using-your-iphone-and-housecurve/60242/26 "2023-06-12T17:21:00Z")

</div>

Perfect. Thank you for your time and effort

---

<div class="post-metadata">

**Author:** ![CENK\_ISIL](https://community.volumio.com/user_avatar/community.volumio.com/cenk_isil/32/11192_2.png) [@CENK\_ISIL](https://community.volumio.com/u/CENK_ISIL)\
**Post date:** [June 12, 2023, 6:38pm UTC](https://community.volumio.com/t/room-correction-using-your-iphone-and-housecurve/60242/27 "2023-06-12T18:38:45Z")

</div>

Hello again,  
I tried loading conv. Filters to my Pi 3 in another room, but it kept crashing with it’s LED solid red. I assumed conv. filters need some horse power and the Pi 3 just can’t handle. So I moved to PEQ export from HouseCurve. Than there’s no sound and looking on the track progress, Tidal is fast forwarding. What am I doing wrong?  
This happens even when I “disable effect”. Disabling the plugin altogether fixes the issue.  
Thank you.[filters.txt](https://community.volumio.com/uploads/short-url/jN7lDFAIAQAcQNW1MrMj46i2DMd.txt) (310 Bytes)

---

<div class="post-metadata">

**Author:** ![balbuze](https://community.volumio.com/user_avatar/community.volumio.com/balbuze/32/30223_2.png) [@balbuze](https://community.volumio.com/u/balbuze)\
**Post date:** [June 12, 2023, 7:08pm UTC](https://community.volumio.com/t/room-correction-using-your-iphone-and-housecurve/60242/28 "2023-06-12T19:08:40Z")

</div>

Hummm. I use 65556 long conv filter with Rpi3 without issue.  
Can you please provide log file for volumio and /tmp/camilladsp.log.  
It should work…

---

<div class="post-metadata">

**Author:** ![CENK\_ISIL](https://community.volumio.com/user_avatar/community.volumio.com/cenk_isil/32/11192_2.png) [@CENK\_ISIL](https://community.volumio.com/u/CENK_ISIL)\
**Post date:** [June 13, 2023, 9:55pm UTC](https://community.volumio.com/t/room-correction-using-your-iphone-and-housecurve/60242/29 "2023-06-13T21:55:05Z")

</div>

hello,  
Well I managed to get the Volumio log file. But Camilladsp.log I couldn’t figure out how.  
://volumio-tv.local/tmp/camilladsp.log is this the way?  
please see attachments. I hope it helps you diagnose the problem.  
thank you

[http://logs.volumio.org/volumio/uTtxWjW.html](http://logs.volumio.org/volumio/uTtxWjW.html)

 ![Screenshot 2023-06-14 at 00.32.28](https://community.volumio.com/uploads/default/original/3X/e/f/eff9c342af047553a41f4044b92dbc6f750cd142.jpeg)  
 ![Screenshot 2023-06-14 at 00.31.53](https://community.volumio.com/uploads/default/original/3X/e/b/eb0f55b36aa5d83182ce75ebea091923de795bff.jpeg)  

[/uploads/default/original/3X/5/9/59cb0021f1257ac1366ea1cbdb4bff4c8a76e931.MOV](https://community.volumio.com/uploads/default/original/3X/5/9/59cb0021f1257ac1366ea1cbdb4bff4c8a76e931.MOV)

---

<div class="post-metadata">

**Author:** ![balbuze](https://community.volumio.com/user_avatar/community.volumio.com/balbuze/32/30223_2.png) [@balbuze](https://community.volumio.com/u/balbuze)\
**Post date:** [June 14, 2023, 5:39pm UTC](https://community.volumio.com/t/room-correction-using-your-iphone-and-housecurve/60242/30 "2023-06-14T17:39:21Z")

</div>

I see nothing… Can you please save volume mixer in volumio playback and reboot?  
Can you play a local file (flac, mp3) or a WEBRADIO using volumio interface?

---

<div class="post-metadata">

**Author:** ![balbuze](https://community.volumio.com/user_avatar/community.volumio.com/balbuze/32/30223_2.png) [@balbuze](https://community.volumio.com/u/balbuze)\
**Post date:** [June 15, 2023, 5:26pm UTC](https://community.volumio.com/t/room-correction-using-your-iphone-and-housecurve/60242/31 "2023-06-15T17:26:10Z")

</div>

Hello. I’ve had a good look at your log. I am intrigued by mpd.conf…

```auto
audio_output {
		type "alsa"
		name "alsa"
		device "volumio"
		dop "no"
		mixer_device "hw:5,0"
                mixer_control "PCM"
                mixer_type "hardware"

```

and

```auto

ALSA lib conf.c:4898:(parse_args) Unknown parameter 1
ALSA lib conf.c:5031:(snd_config_expand) Parse arguments error: No such file or directory
ALSA lib control.c:1375:(snd_ctl_open_noupdate) Invalid CTL hw:5,0
Jun 12 15:19 : exception: Failed to read mixer for 'alsa': failed to attach to hw:5,0: No such file or directory

```

his not look like a standard config… Did you tweak this (yes) 😬?

---

<div class="post-metadata">

**Author:** ![CENK\_ISIL](https://community.volumio.com/user_avatar/community.volumio.com/cenk_isil/32/11192_2.png) [@CENK\_ISIL](https://community.volumio.com/u/CENK_ISIL)\
**Post date:** [June 15, 2023, 10:24pm UTC](https://community.volumio.com/t/room-correction-using-your-iphone-and-housecurve/60242/32 "2023-06-15T22:24:08Z")

</div>

Me? tweak a code? all I know about code is Basic from CS in high school.  
I use the pie with USB input for the “Platin Hub” a Wisa transmitter. Known for sporadic USB behavior. If that’s an indication.  
Btw I fixed the issue as you suggested; set mixer to None.  
Thank you for all your support.  
Cenk

---

<div class="post-metadata">

**Author:** ![CENK\_ISIL](https://community.volumio.com/user_avatar/community.volumio.com/cenk_isil/32/11192_2.png) [@CENK\_ISIL](https://community.volumio.com/u/CENK_ISIL)\
**Post date:** [June 15, 2023, 10:32pm UTC](https://community.volumio.com/t/room-correction-using-your-iphone-and-housecurve/60242/33 "2023-06-15T22:32:21Z")

</div>

This is a post from Platin Support on FB.

The Raspberry Pi we have never tested for our USB-input and it sound like there is a driver-issue here in your case. We know there is a driver for Windows and MAC. The trick here is, that the USB chipset does not forward volume information from external devices, that is why we default set USB-input gain to 0dB and the input signal was adjusted on computer output instead - to avoid double volume control. So our volume control is completely isolated from the external device. So - when you say your device is adjusting the volume - it is most likely either adjusted on the RPI output and then something is not compatible with the USB chipset inside the device and messing up stuff due to driver mismatch. Our suggestion would be that you use the optical or coax input of the Hub instead of USB-input and let RPI adjust volume of SPDIF signal instead if you prefer the conveninence of that, and then set that input to fixed 0dB gain.

---

<div class="post-metadata">

**Author:** ![CENK\_ISIL](https://community.volumio.com/user_avatar/community.volumio.com/cenk_isil/32/11192_2.png) [@CENK\_ISIL](https://community.volumio.com/u/CENK_ISIL)\
**Post date:** [July 4, 2023, 3:44pm UTC](https://community.volumio.com/t/room-correction-using-your-iphone-and-housecurve/60242/34 "2023-07-04T15:44:28Z")

</div>

@balbuze hello,  
is there a way to save several conv. filters as presets? I figured out peq, but conv, I’m at a loss.  
thabk you. cenk

---

<div class="post-metadata">

**Author:** ![balbuze](https://community.volumio.com/user_avatar/community.volumio.com/balbuze/32/30223_2.png) [@balbuze](https://community.volumio.com/u/balbuze)\
**Post date:** [July 4, 2023, 3:58pm UTC](https://community.volumio.com/t/room-correction-using-your-iphone-and-housecurve/60242/35 "2023-07-04T15:58:17Z")

</div>

Hello!  
Yes, but this 'not (yet) implemented in the hub (right bottom memu). So to access, go in plugin settings in convolution mode. Scroll down and you will find preset!  
Let me know ☺

 ![image](https://community.volumio.com/uploads/default/original/3X/c/d/cdebca3652779800b3c13b45e0adc37ea97cc8d6.png)

---

<div class="post-metadata">

**Author:** ![CENK\_ISIL](https://community.volumio.com/user_avatar/community.volumio.com/cenk_isil/32/11192_2.png) [@CENK\_ISIL](https://community.volumio.com/u/CENK_ISIL)\
**Post date:** [July 26, 2023, 12:52pm UTC](https://community.volumio.com/t/room-correction-using-your-iphone-and-housecurve/60242/36 "2023-07-26T12:52:22Z")

</div>

Hello,  
I misread the help text as I can only have one set of filter files named myfilter-Xk.wav in the filters folder. I tried adding myfilter-Yk.wav, it works. I should have just tired, my fault. Thank you.

I want to play around with rephase. What taps number should I use in rephase to export to REW and later Camilla not to have a problem?

thank you for your help. cenk

---

<div class="post-metadata">

**Author:** ![balbuze](https://community.volumio.com/user_avatar/community.volumio.com/balbuze/32/30223_2.png) [@balbuze](https://community.volumio.com/u/balbuze)\
**Post date:** [July 26, 2023, 4:50pm UTC](https://community.volumio.com/t/room-correction-using-your-iphone-and-housecurve/60242/37 "2023-07-26T16:50:49Z")

</div>

I suggest 65536 taps filters… It’s a good compromise between quality and delay ( yes, delay introduces by Fir filter is related to the length)

---

<div class="post-metadata">

**Author:** ![CENK\_ISIL](https://community.volumio.com/user_avatar/community.volumio.com/cenk_isil/32/11192_2.png) [@CENK\_ISIL](https://community.volumio.com/u/CENK_ISIL)\
**Post date:** [July 26, 2023, 7:01pm UTC](https://community.volumio.com/t/room-correction-using-your-iphone-and-housecurve/60242/38 "2023-07-26T19:01:40Z")

</div>

@gregwilding  
Hey Greg,  
REW freq. resp. acquisition is way over detailed in parameters for a newbie like me. Do I loose any accuracy if I just import from HouseCurve?  
Would you suggest I do the averaging in REW? Or HouseCurves averaging is close enough?  
Thank you

---

<div class="post-metadata">

**Author:** ![gregwilding](https://community.volumio.com/user_avatar/community.volumio.com/gregwilding/32/18482_2.png) [@gregwilding](https://community.volumio.com/u/gregwilding)\
**Post date:** [July 27, 2023, 2:42pm UTC](https://community.volumio.com/t/room-correction-using-your-iphone-and-housecurve/60242/39 "2023-07-27T14:42:38Z")

</div>

Hi Cenk - Importing should be fine, there won’t be any loss. REW out of the box and HouseCurve should measure quite closely if you use the same microphone.

I think HouseCurve’s average is good enough (IMHO 🙂). It averages the dB values, which favors the “tops” of the measurement, apparently that’s more reflective of what we hear. REW probably gives you more knobs to twist if you want to experiment.

---

<div class="post-metadata">

**Author:** ![CENK\_ISIL](https://community.volumio.com/user_avatar/community.volumio.com/cenk_isil/32/11192_2.png) [@CENK\_ISIL](https://community.volumio.com/u/CENK_ISIL)\
**Post date:** [July 27, 2023, 5:59pm UTC](https://community.volumio.com/t/room-correction-using-your-iphone-and-housecurve/60242/40 "2023-07-27T17:59:22Z")

</div>

Hi Greg, extra knobs is exactly what I’m running from. thank you

[Previous page](https://community.volumio.com/t/room-correction-using-your-iphone-and-housecurve/60242.md?page=1)

[Next page](https://community.volumio.com/t/room-correction-using-your-iphone-and-housecurve/60242.md?page=3)
