Is there a way to enable/disable the screensaver via a GPIO pin. So having a pushbutton to toggle through different displays. (playnow/peppy)
Using a piece of code that overwrites the timeout with a high or low number will not work without a save or volumio vrestart.
Any ideas?
I have a PI3 with Volumio3 and a 800x480 display (5.5" and not 7") and Peppymeter running not in random mode (I like a specific set of dials!) with cache enabled and I have this memory situation:
Hi massimogentilini
for a RPi3 with 1gb its better to deactivate the cache. The cache needs more free memory.
If you don’t need all different meters, reduce the number of meters for random mode with the list option. This also reduce the required memory.
Here’s a quick one. How can I easily see changes to the meters without rebooting? I figured it would be something like a service something restart. Currently, when i change and apply a different meter to sEe what it looks like, i need to reboot. Thank you.
I have a raspberry pi4 in a box with a 3.5 lcd with volumio layout attached to the rpi4. I would like to connect a 3.5 inch display for the PeppyMeter. I still have a nextion but I can’t handle it at all. are there any other options than buying a very expensive hdmi display to see peppy? is it possible to connect 2 displays to the 40pin at all?