I loaded my userconfig file will the following commands:
Add your custom config.txt options to this file, which will be preserved during updates
Touch Display gpu_mem setting below: do not alter
gpu_mem=128
Touch Display rotation setting below: do not alter
display_lcd_rotate=3
display_hdmi_rotate=3
hdmi_cvt=480 1920 60
hdmi_drive=1
hdmi_mode=87
hdmi_group=2
max_framebuffer_width=1920
max_framebuffer_height=1920
framebuffer_width=1920
framebuffer_height=480
enable_uart=1
dtoverlay=disable-bt
I am using the GPIO button plugin to turn off the raspPI and now the light is on while the RaspPI is running. That is now solved.
With the userconfig file loaded the screen has the correct orientation and it shows the Volumio boot up sequence but it stops at the login prompt.
The only issue I have now is the Peppy screensaver 2.2.1 is not working. It shows under the installed plugin list and I can change settings but nothing happens. Is there another plugin I need to run. My screen is not a touch screen so I did not install the touch screen plugin.